Corrosion Science and Technology

  • 제23권5호
  • /
  • Pages.365-373
  • /
  • 2024
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Enhancing the Durability and Surface Properties of Ceramic-Glass via DLC Coating Method

  • 투고 : 2024.08.25
  • 심사 : 2024.10.01
  • 발행 : 2024.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study was to investigate how diamond-like carbon (DLC) coatings could improve ceramic-glass durability and surface property. Ceramic-glass is valued for its aesthetic appeal. However, it is brittle and easily damaged. To address this issue, we looked into the use of DLC coatings known for their high hardness and low friction properties. Starting with cleaning the surface with linear ion guns to remove any impurities, a buffer layer was applied to enhance the adhesion of coatings. The DLC layer was deposited using unbalanced magnetron (UBM) sputtering, which maximized the deposition efficiency by controlling magnetic fields. Results demonstrated a significant improvement in mechanical properties of ceramic glass, with DLC-coated surfaces achieved a friction coefficient close to zero, a surface hardness of 22 GPa, and an adhesion strength exceeding 30 N. These findings confirm that DLC coatings can substantially increase the durability and extend the service life of ceramic glass, making them a promising solution for enhancing performances of high-cost brittle materials.

키워드

과제정보

This work was supported by the Technology Development Program (00223520) funded by the Ministry of SMEs and Startups (MSS, Korea).

참고문헌

  1. M. Gonon and F. Dupla, Glass-Ceramics and Their Applications, Encyclopedia of Materials: Technical Ceramics and Glasses, 2, 709 (2021). Doi: https://doi.org/10.1016/B978-0-12-818542-1.00008-4 
  2. S. Nikkisha, S. Rohan, P. Pattanaik, A. K. Mishra and D. Darshini, Review Study on Mechanical and Thermal Properties of Ceramic Materials for Future Aerospace Applications, Materials and its Characterization, 2, 107 (2022). Doi: https://doi.org/10.46632/mc/1/2/7 
  3. A. R. Boccaccini, Assessment of brittleness in glass-ceramics and particulate glass matrix composites by indentation data, Journal of Materials Science Letters, 15, 1119 (1996). Doi: https://doi.org/10.1007/BF00539954 
  4. G. A. Khater and E. M. Safwat, Some Types of Glass-Ceramic Materials and their Applications, International Journal of Research Studies in Science, Engineering and Technology, 7, 1 (2020). https://ijrsset.org/pdfs/v7-i3/1.pdf 
  5. M. S. Kabir, Z. Zhou, Z. Xie, and P. Munroe, Designing multilayer diamond-like carbon coatings for improved mechanical properties, Journal of Materials Science and Technology, 65, 108 (2021). Doi: https://doi.org/10.1016/j.jmst.2020.04.077 
  6. D. K. Rajak, A. Kumar, A. Behera, and P. L. Menezes, Diamond-Like Carbon (DLC) Coatings: Classification, Properties, and Applications, Applied Sciences, 11, 4445 (2021). Doi: https://doi.org/10.3390/app11104445 
  7. H. Ito and K. Yamamoto, Mechanical and Tribological Properties of DLC Films for Sliding Parts, KOBELCO Technology Review, vol. 35 (2017). https://www.kobelco.co.jp/english/ktr/pdf/ktr_35/055-060.pdf 
  8. B. Dong, X. Guo, K. Zhang, Y. Zhang, Z. Li, W. Wang, and C. Cai, Combined effect of laser texturing and carburizing on the bonding strength of DLC coatings deposited on medical titanium alloy, Surface and Coatings Technology, 429, 127951 (2022). Doi: https://doi.org/10.1016/j.surfcoat.2021.127951 
  9. D. Guo, S. Zhang, T. Huang, S. Wu, X. Ma, and F. Guo, Corrosion Properties of DLC Film in Weak Acid and Alkali Solutions, Coatings, 12, 1776 (2022). Doi: https://doi.org/10.3390/coatings12111776 
  10. R. Zhang and L. Wang, Synergistic improving of tribological properties of amorphous carbon film enhanced by F-Si-doped multilayer structure under corrosive environment, Surface and Coatings Technology, 276, 626 (2015). Doi: https://doi.org/10.1016/j.surfcoat.2015.06.006 
  11. H. Kovaci, A. F. Yetim, Z. Baran, and A. Celik, Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions, Ceramics International, 44, 7151 (2018). Doi: https://doi.org/10.1016/j.ceramint.2018.01.158 
  12. S. Grigoriev, M. Volosova, S. Fyodorov, M. Lyakhovetskiy, and A. Seleznev, DLC-coating Application to Improve the Durability of Ceramic Tools, Journal of Materials Engineering and Performance, 28, 4415 (2019). Doi: https://doi.org/10.1007/s11665-019-04149-1 
  13. D. Tobola, T. Liskiewicz, L. Yang, T. Khan, and U. Boron, Effect of mechanical and thermochemical tool steel substrate pre-treatment on diamond-like carbon (DLC) coating durability, Surface and Coatings Technology, 422, 127483 (2021). Doi: https://doi.org/10.1016/j.surfcoat.2021.127483 
  14. K. Enke, Dry machining and increase of endurance of machine parts with improved doped DLC coatings on steel, ceramics and aluminium, Surface and Coatings Technology, 116-119, 488 (1999). Doi: https://doi.org/10.1016/S0257-8972(99)00096-1 
  15. J. I. Kim, W. Y. Lee, K. Tanaka, T. Tokoroyama, M. Murashima, and N. Umehara, Nitrogen-containing diamond-like carbon deposited on glass substrate via filtered cathodic vacuum arc with high-frequency pulsed DC substrate bias, Surfaces and Interfaces, 44, 103695 (2024). Doi: https://doi.org/10.1016/j.surfin.2023.103695 
  16. A. Poukhovoi, S. Schiporeit, H. W. Becker, L. Calliari, V. Buck, Assessment of spectroscopic methods for the characterisation of DLC films deposited by PECVD, Journal of Optoelectronics and Advanced Materials, 14, 383 (2012). https://joam.inoe.ro/articles/assessment-of-spectroscopic-methods-for-the-characterisation-of-dlc-films-deposited-by-pecvd/
  17. A. C. Ferrari and J. Robertson, Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond, Philosophical Transactions of the Royal Society A, Mathematical, Physical and Engineerings Sciences, 362, 2477 (2004). Doi: https://doi.org/10.1098/rsta.2004.1452 
  18. H. Pang, X. Wang, G. Zhang, H. Chen, G. Lv, and S. Yang, Characterization of diamond-like carbon films by SEM, XRD and Raman spectroscopy, Applied Surface Science, 256, 6403 (2010). Doi: https://doi.org/10.1016/j.apsusc.2010.04.025 
  19. G. Wu, L. Sun, W. Dai, L. Song, and A. Wang, Influence of interlayers on corrosion resistance of diamond-like carbon coating on magnesium alloy, Surface and Coatings Technology, 204, 2193 (2010). Doi: https://doi.org/10.1016/j.surfcoat.2009.12.009