한국표면공학회지 (Journal of Surface Science and Engineering)

  • 제57권5호
  • /
  • Pages.379-385
  • /
  • 2024
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

Investigation of Al-Ag thin films for high-performance SAW devices with low insertion loss and high frequency selectivity

  • JaeCheol Park (Purpose-based Mobility Group, Korea Institute of Industrial Technology (KITECH))
  • 투고 : 2024.08.22
  • 심사 : 2024.09.04
  • 발행 : 2024.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Al-Ag thin films with varying compositions were fabricated using a combinatorial sputtering system to develop highly sensitive SAW devices. The Al-Ag sample library exhibited a wide range of electrical resistivity and chemical compositions, providing valuable data for selecting optimal materials. Recognizing the significant influence of both resistivity and density of IDT electrodes on the generation of acoustic waves from piezoelectric materials, three types of Al-Ag thin films with different Al contents were fabricated, maintaining a consistent thickness of 150 nm. As the Al content decreased from 84.6 at% to 21.7 at%, the resistivity increased from 5.1 to 0.8 × 10-5 Ω-cm, while the calculated density increased from 3.9 to 8.8 g/cm3. The SAW devices fabricated with these Al-Ag IDT electrodes resonated at 71 MHz without frequency shifts, but the resonant frequency selectivity and insertion loss deteriorated with decreasing Al content, highlighting the predominant influence of electrode density over electrical conductivity on SAW device performance.

키워드

과제정보

This study has been conducted with the support of the Korea Institute of Industrial Technology and Korea Industrial Complex Corporation as " Competitiveness reinforcement project for industrial clusters (1415189052)".

참고문헌

  1. K. Lange, M. Rapp, Surface acoustic wave biosensors: a review, Analytical and Bioanalytical Chemistry, 391 (2008) 1509-1519.
  2. S. Qureshi, M. Khan, Review of fabrication of SAW sensors on flexible substrates: Challenges and future, Results in Engineering, 22 (2024) 102323.
  3. C. Wang, Y. Ding, B. Yang, Surface acoustic wave sensor based on Au/TiO2/PEDOT with dual response to carbon dioxide and humidity, Analytica Chimica Acta, 1190 (2022) 339264.
  4. P. Rajput, P. Mishra, Thermal sensitivity study of thin film over-layered SAW devices for sensor applications, Inorganic Chemistry Communications, 146 (2022) 110116.
  5. V. Varadan, H. Subramanian, Fabrication, characterization and testing of wireless MEMS-IDT based microaccelerometers, Sensors and Actuators A: Physical, 90 (2001) 7-19.
  6. W.C. Shih, R.C. Huang, Fabrication of high frequency ZnO thin film SAW devices on silicon substrate with a diamond-like carbon buffer layer using RF magnetron sputtering, Vacuum, 83 (2008) 675-678.
  7. G.F. Iriarte, F. Calle, Fabrication of sub-100 nm IDT SAW devices on insulating, semiconducting and conductive substrates, Journal of Materials Processing Technology, 212 (2012) 707-712.
  8. V. Kandadai, B. Jasthi, Microstructural characterization of nanocrystalline hexagonal boron nitride thin films deposited by ion-beam assisted pulsed laser deposition, Surface and Coatings Technology, 487 (2024) 131035.
  9. S.C. Hsu, T.H. Chuang, The structures and thermoelectric properties of Zn-Sb alloy films fabricated by electron beam evaporation through an ion beam assisted deposition, Applied Surface Science, 540 (2021) 148264.
  10. B. Martins, F. Fernandes, Electrical properties and thermistor behavior of TiAlN thin films deposited by combinatorial sputtering, Surface and Coatings Technology, 464 (2023) 129545.
  11. R.C. Chanaud, Effects of geometry on the resonance frequency of Helmholtz resonators, Journal of Sound and Vibration, 178 (1994) 337-348.
  12. J. Cheeke, Fundamentals and applications of ultrasonic waves, CRC Press, Florida, (2002) 10-24.