품질경영학회지 (Journal of Korean Society for Quality Management)

  • 제52권3호
  • /
  • Pages.413-428
  • /
  • 2024
  • /
  • 1229-1889(pISSN)
  • /
  • 2287-9005(eISSN)
한국품질경영학회 (Korean Society for Quality Management)
권호 표지
DOI QR코드

DOI QR Code

6시그마를 이용한 타일 에폭시 접착제의 초기 접착 강도 향상에 관한 연구

A Study on the Improvement of the Initial Adhesive Strength of Tile Epoxy Adhesive Using 6 Sigma Methodology

  • 이정호 (경기대학교 산업시스템공학과) ;
  • 배규익 (경기대학교 산업시스템공학과) ;
  • 하병욱 (경기대학교 산업시스템공학과) ;
  • 김소민 (경기대학교 산업시스템공학과) ;
  • 성시일 (경기대학교 산업시스템공학과)
  • Jeong Ho Lee (Department of Industrial and Systems Engineering, Kyonggi University) ;
  • Gyu Ik Bae (Department of Industrial and Systems Engineering, Kyonggi University) ;
  • Byeong Uk Ha (Department of Industrial and Systems Engineering, Kyonggi University) ;
  • So Min Kim (Department of Industrial and Systems Engineering, Kyonggi University) ;
  • Si Il Sung (Department of Industrial and Systems Engineering, Kyonggi University)
  • 투고 : 2024.05.20
  • 심사 : 2024.07.16
  • 발행 : 2024.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: This study aims to optimize the adhesive strength of epoxy adhesive when applied to tiles, addressing frequent issues of adhesion degradation observed in indoor interiors. The degradation often leads to costly repairs and maintenance, highlighting the need for improved adhesive formulations and application techniques. Methods: Employing the DMAIC (Define, Measure, Analyze, Improve, Control) methodology integral to Six Sigma and utilizing MINITAB for data analysis, this research focused on critical factors like curing time, application method, and mixing ratio. The Taguchi Experimental Design within the Design of Experiments (DOE) framework was applied to determine the impact of these parameters on adhesive strength. Results: The analysis facilitated by Taguchi's method led to notable improvements in adhesive workability and consistency. It identified the optimal combination of factors that significantly increase adhesive strength, evidenced by the improvement in signal-to-noise ratio and I-MR control charts. Conclusion: By applying a structured statistical approach through Six Sigma and the Taguchi method, the study successfully pinpointed optimal conditions for epoxy adhesive application on tiles. This contributes to quality management in the manufacturing and application processes of epoxy adhesives, ensuring enhanced durability and reliability in indoor tiling applications. The findings offer a significant methodological framework for future material optimization research.

키워드

과제정보

본 연구는 과학기술정보통신부 및 정보통신기획평가원의 SW중심대학지원사업의 연구결과로 수행되었음(2021-0-01393).

참고문헌

  1. Chi, L. Z., Kwak J. S., & Ha M. K. 2004. Geometric Error Analysis of Surface Grinding by Design of Experiments Transactions of the Korean Society of Machine Tool Engineers 13(4):1-8. 
  2. Cho, Y. K., Jeon, J. H., Park, C. H., & Jo, S. H. 2021. Preparation and Construction Method of Polymer Tile Adhesive for Reducing Tile Defects. Proceedings of the Korea Institute of Building Construction Conference 21(1): 183-184. 
  3. Ham, S. M., & Kim, W. K. 2014. Long-term Strength Properties of Hardener-Free Epoxy-Modified Mortars. Journal of the Korea Institute of Building Construction 34(2):613-614. 
  4. Im, S. H. 1995. High Performance Thermoplastic Composites. Polymer Science and Technology 6(5):451-458. 
  5. Jeon, Y. G., Huh, H. J., Lee, S. B., Park, H. H., & An, B. G. 2020. A Study on the Quality Improvement of Mechanical Drawing Notes Using Lean 6 Sigma Analysis. Journal of the Korean Society for Quality Management 48(3): 381-393. 
  6. Jin, Y. Y., & Jung, S. P. 2008. Structural Robust Design of PEMFC Gasket Using Taguchi Method, Journal of the Korean Society for Aeronautical & Space Sciences 36(8):740-746. 
  7. Karna, S. K., Singh, R. V., & Sahai, R. 2012. Application of Taguchi Method in Process Optimization, Proceedings of the National Conference on Trends and Advances in Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana. 
  8. Kim, T. G., Song, B. Y., & Lee, H. S. 2019. The Robust Design for Urban Railway Vehicle Suspension System Using Taguchi Method. Journal of The Korean Society For Urban Railway 7(1):95-105. 
  9. Kim, J. G. et al. 2016. Development of Epoxy Adhesive using Core Shell Structured Latent Curing Agent. Korea Institute of Industrial Technology, 1-83. 
  10. Kim, K. H., & Kim, H. J. 2024. A Study on the Build of a QbD Six Sigma System to Promote Quality Improvement (QbD) Based on Drug Design, Journal of the Korean Society for Quality Management 50(3):373-386. 
  11. Kwon Y. S., & Jeong Y. D. 2006. Optimization of Injection Molding Process using Experiment of Design, Proceedings of the Korean Society of Mechanical Engineers Conference. 
  12. Lee, B. Y., Lee, H. W. 2007. Shape optimal design of an automotive pedal arm using the Taguchi method, Journal of the Korean Society for Precision Engineering 24(3):76-83. 
  13. Lee, H. I., Son, T. H., Hong, L., & Park, C. H. 2022. Construction Trends Briefing" Proceedings of the Korea Institute of Construction & Economy Research 839(1):3-12. 
  14. Lee, S. K., Kim, G. Y., Hwang, E. C., Son, M. J., Lee, S. Y., & Nam, J. S. 2020. Adhesion Properties of Epoxy Resin Adhesive Reinforced Tile, Proceedings of the Korea Institute of Building Construction Conference 20(1): 128-129. 
  15. Lettieri, M., & Frigione, M. 2012. Construction and Building Materials 30:753-760. 
  16. Park, H. J., Eom, Y. B., Jung, W. J., & Kim, D. Y. (2021). A Study on the Analysis of Defect Types and Reduction Measures in Tile Work of Apartment Houses. Journal of the Korea Institute of Building Construction 21(6):701-712. 
  17. Park, S. H. 1995. Design of Experiment. Minyoungsa, pp. 521-524. 
  18. Park, S. H. 2022. Modern Experimental Design Methods. Minyoungsa. 
  19. Prolongo, S. G., del Rosario, G., & Urena, A. 2006. Comparative study on the adhesive properties of different epoxy resins. International Journal of Adhesion and Adhesives 26(3):125-132. 
  20. Woon G. J. 2013. Optimal Design of the Front Upright of Formula Race Car Using Taguchi's Orthogonal Array, Journal of the Korean Society of Manufacturing Technology Engineers 22(1):112-118. 
  21. Yoo, C. B., Jeong, S. I, Lee, M. J., Jeon, Y. H., Kim, T. K., Na, M. H., Sung, S. I., & Kim, S. J. 2021. Recent Statistical Quality Control Based on ISO.KS, Minyoungsa. 
  22. Yoo, J. H., Shin, P. S., Kim, J. H., Lee, S. I., & Park, J. M. 2020. Evaluation of Adhesion Property with Pot Life and Curing Humidity of GFRC and Epoxy Adhesive, Journal of the Korean Adhesion and Interface Society 21(2):65-70. 
  23. Yu, I. G., Ahn, S. J., Ryu, S. M., Hong, S. H., & Lee, M. K. 2024. Optimization of a Rubber based Colloidal Suspension Manufacturing Process Using Mixture Experimental Design, Journal of the Korean Society for Quality Management 52(2):377-394.