한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제27권5호
  • /
  • Pages.588-595
  • /
  • 2024
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

성형작약탄 라이너 용입체 형상에 따른 제트특성 분석

Characteristics of Shaped Charge Jets by the Shape of the Inhibitor Inserted into the Liner

  • 최준홍 (국방과학연구소 지상기술연구원) ;
  • 구만회 (국방과학연구소 지상기술연구원)
  • Joonhong Choi (Ground Technology Research Institute, Agency for Defense Development) ;
  • Manhoi Koo (Ground Technology Research Institute, Agency for Defense Development)
  • 투고 : 2024.04.23
  • 심사 : 2024.07.15
  • 발행 : 2024.10.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The performance of a shaped charge bomb depends on the explosive performance, liner precision machining and manufacturing quality. The key performance is how uniformly the liner transforms into a jet. In order to reduce the performance of the shaped charge bomb from a protection point of view, this study investigated the characteristics of the jet formation and progression by inserting inhibitors of different shapes into the liner using flash X-ray experimental analysis techniques. The larger the volume filled inside the liner, the lower the rate of high-speed jet generation, which was well confirmed by experiments. Due to the effect of the inhibitor, it takes a considerable amount of time delay to form a jet after explosion compared to a normal shot, and quantity and mass of jet particles that can contribute to penetration are decreased, and the penetration power is also greatly reduced due to the scattering of segmented jets.

키워드

과제정보

이 논문은 2024년 정부의 재원으로 수행된 연구 결과임.

참고문헌

  1. V. Madhu, T. Balakrisshna Shat, "Armour protection and affordable protection for futuristic combat vehicles," Defense Science Journal, Vol. 61, pp. 394-402, 2011. 
  2. Z. Rosenberg, Y. Ashuach, Y. Yeshurun, E. Dekel, "On the main mechanisms for defeating AP projectiles, long rods and shaped charge jets," Internal Journal of Impact Engineering, Vol. 36, pp. 588-596, 2009. 
  3. W. P. Walters, J. A. Zukas, "Fundamentals of shaped charges," John Wiley & Sons, New York, pp. 1-10, 1989. 
  4. B. K. So, "A study on the improvement of penetration capability of shaped charge by controlling the jet mass parameters," Journal of the Korea Institute of Military Science and Technology, Vol. 18. pp. 566-573. 2015. 
  5. W. P. Walters, D. R. Scheffler, "A method to increase the tip velocity of a shaped charge jet," Proceedings of the 23rd International Symposium on Ballistics, Vol. 2, pp. 135-144, 2007. 
  6. P. Y. Chanteret, "Studies of maximum velocities for coherent shaped charge jets," Proceedings of the 13th International Symposium on Ballistics, Vol. 2, pp. 327-334, 1992. 
  7. H. Kemmoukhe, S. Savie, S. Terzie, M. Lisov, N. Rezgui, H. Sedra, "Improvement of the shaped charge jet penetration capability by modifying the liner form using AUTODYN-2D," Scientific Technical Review, Vol. 69, pp. 10-15, 2019. 
  8. S. Saran, O. Ayisit, M. S. Yavuz, "Experimental investigations on Aluminum shaped charge liners," Procedia Engineering, Vol. 58, pp. 479-486, 2013. 
  9. P. J. Hazell, T. Lawrence, C. Stennett, "The defeat of shaped charge jets by explosively driven ceramic and glass plates," International Journal of Applied Ceramic Technology, Vol. 9, pp. 382-392, 2012. 
  10. M. Held, "Comparison of explosive reactive armour against different threat levels," Propellants, Explosives, Pyrotechnics, Vol. 24, pp. 76-77, 1999. 
  11. M. Held, M. Mayseless, E. Rototaev, "Explosive reactive armor," Proceedings of the 17th International Symposium on Ballistics, Vol. 1, pp. 33-46, 1998. 
  12. M. J. van der Voorde, J. J. A. van der Burgt, M. J. van der jagt-Deutekom, "Defeating the RPG7 threat by using electric power in reactive armour applications," Proceedings of the 23rd International Symposium on Ballistics, Vol. 2, pp. 1141-1147, 2007. 
  13. W. Walters, "Introduction to Shaped charges," U.S. Army Research Lab. Report, ARL-SR-150, 2007. 
  14. M. Mayseless, "Effectiveness of Explosive Reactive Armor," ASME Journal of Applied Mechanics., Vol. 78, 051006, 2011. 
  15. L. Yang, J. Xu, "Analysis on the development of active Production system for tanks and armored vehicles," Journal of Physics: Conference Series, Vol. 1855, 012034, 2021. 
  16. O. Ayisit, "The influence of asymmetries in shaped charge performance," International Journal of Impact Engineering, Vol. 35, pp. 1399-1404, 2008. 
  17. M. Katayama, A. Takeba, S. Toda, S. Kibe, "Analysis of jet formation and penetration by conical shaped charge with the inhibitor," International Journal of Impact Engineering, Vol. 23, pp. 443-454, 1999. 
  18. J. H. Joo, J. H. Choi, "The inhibitor effect on the shaped charge jet penetration," Journal of Mechanical Science and Technology, Vol. 34, pp. 4685-4694, 2020. 
  19. J, H. Joo, J. W. Yoon, "The potential of rubber material as an inhibitor to suppress jet formation of the shaped charge warhead," Journal of Mechanical Science and Technology, Vol. 38, pp. 1329-1340, 2024. 
  20. Operator's manual, "EBW firing system FS-17 fire set," Teledyne RISI, Inc. Tracy, CA 95377, 2015. 
  21. M. Held, "Penetration cutoff velocities of shaped charge jets," Propellants, Explosives, Pyrotechnics, Vol. 13, pp. 111-119, 1998.