Steel and Composite Structures

  • 제52권6호
  • /
  • Pages.663-672
  • /
  • 2024
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of internal damping on the bending vibration characteristics of composite drive shaft

  • Mo Yang (Hubei Longzhong Laboratory, Hubei University of Arts and Science) ;
  • Haonan Hu (School of Mechanical Engineering, Hubei University of Arts and Science) ;
  • Xian Zhou (School of Mechanical Engineering, Hubei University of Arts and Science) ;
  • Wen Zhang (School of Mechanical Engineering, Hubei University of Arts and Science) ;
  • Yuebin Zhou (School of Mechanical Engineering, Hubei University of Arts and Science) ;
  • Yikun Wang (School of Mechanical Engineering, Hubei University of Arts and Science) ;
  • Jianmin Ye (School of Mechanical Engineering, Hubei University of Arts and Science)
  • 투고 : 2020.05.28
  • 심사 : 2024.09.20
  • 발행 : 2024.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper researched on the bending vibration characteristics of composite drive shaft with internal damping. To analyze the unbalanced excitation response in full speed range, a transfer matrix model was built based on the improved Layer-wise theory and the numerical damping, and compared with the metal drive shaft. The results show that the effect of internal damping of the composite shaft tube on bending vibration response was different in the subcritical, critical and supercritical speed ranges. Then, the finite element analysis and vibration tests were carried out to verify the analysis results of transfer matrix model.

키워드

과제정보

The research described in this paper was financially supported by the National Natural Science Foundation of China (No. 52105095), the Science and Technology Research Project of Hubei Provincial Department of Education (No. B2021205) and the Fund of Hubei Superior and Distinctive Discipline Group of Mechatronics and Automobiles (No. XKQ2020008).

참고문헌

  1. Alwan, V. Gupta, A. Sekhar, A. and Velmurugan, R. (2010), "Dynamic analysis of shafts of composite materials", J. Reinforced Plastics Compos., 29(22), 3364-3379. https://doi.org/10.1177/0731684410371404.
  2. Arab, S.B. Jose, D.R. Bouaziz, S. and Haddar, M. (2018), "Stability analysis of internally damped rotating composite shafts using a finite element formulation", Comptes Rendus Mecanique, 346(4), 291-307. https://doi.org/10.1016/j.crme.2018.01.002.
  3. Badie, M.A. Mahdi, E. and Hamouda, A.M.S. (2011), "An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft", Mater. Des., 32(3), 1485-1500. https://doi.org/10.1016/j.matdes.2010.08.042.
  4. Enayat, S. Hashemian, M. Toghraie, D. and Jaberzadeh, E. (2020a), "A comprehensive study for mechanical behavior of functionally graded porous nanobeams resting on elastic foundation", J. Brazil. Soc. Mech. Sci. Eng., 42, 420. https://doi.org/10.1007/s40430-020-02474-4.
  5. Enayat, S. Hashemian, M. Toghraie, D. Jaberzadeh, E. (2020b), "Bending, buckling and vibration analyses of FG porous nanobeams resting on Pasternak foundation incorporating surface effects", Z Angew Math Mech, 202000231. https://doi.org/10.1002/zamm.202000231.
  6. Hajianmaleki, M. and Qatu, M.S. (2013), "Transverse vibration analysis of generally laminated two-segment composite shafts with a lumped mass using generalized differential quadrature", J. Vib. Control, 19(13), 2013-2021. https://doi.org/10.1177/1077546312452903.
  7. Hashemian, M. Falsafioon, M. Pirmoradian, M. and Toghraie, D. (2020), "Nonlocal dynamic stability analysis of a Timoshenko nanobeam subjected to a sequence of moving nanoparticles considering surface effects", Mech. Mater., 148, 103452. https://doi.org/10.1016/j.mechmat.2020.103452.
  8. Hashemian, M. Foroutan, S. and Toghraie, D. (2019), "Comprehensive beam models for buckling and bending behavior of simple nanobeam based on nonlocal strain gradient theory and surface effects", Mech. Mater., 139, 103209. https://doi.org/10.1016/j.mechmat.2019.103209.
  9. Ho-Huu, V. Vo-Duy, T. Duong-Gia, D. and Nguyen-Thoi, T. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Struct., 27(3), 297-310. https://doi.org/10.12989/scs.2018.27.3.297.
  10. Jacquet-Richardet, G. Chatelet, E. and Nouri-Baranger, T. (2011), "Rotating internal damping in the case of composite shafts", Proceedings of IUTAM symposium on emerging trends in rotor dynamics, 125-134. https://doi.org/10.1007/978-94-007-0020-8_11.
  11. Karthikeyan, P. Gobinath, R. Ajith Kumar, L. Xavier Jenish, D. (2017), "Design and analysis of drive shaft using kevlar/epoxy and glass/epoxy as a composite material", IOP Conf. Series: Materials Science and Engineering, 197, 012048. https://doi.org/10.1088/1757-899X/197/1/012048.
  12. Montagnier, O. and Hochard, C. (2007), "Dynamic instability of supercritical driveshafts mounted on dissipative supports-effects of viscous and hysteretic internal damping", J. Sound Vib., 305(3), 378-400. https://doi.org/10.1016/j.jsv.2007.03.061.
  13. Montagnier, O. and Hochard, C. (2014), "Dynamics of a supercritical composite shaft mounted on viscoelastic supports", J. Sound Vib., 333(2), 470-484. https://doi.org/10.1016/j.jsv.2013.09.021.
  14. Pirmoradian, M. Torkan, E. Abdali, N. Hashemian, M. and Toghraie, D. (2019), "Thermo-mechanical stability of single-layered graphene sheets embedded in an elastic medium under action of a moving nanoparticle", Mech. Mater., 141, 103248. https://doi.org/10.1016/j.mechmat.2019.103248.
  15. Pirmoradian, M. Torkan, E. Zali, H. Hashemian, M. and Toghraie, D. (2020), "Statistical and parametric instability analysis for delivery of nanoparticles through embedded DWCNT", Phys A Stat Mech Appl, 554, 123911. https://doi.org/10.1016/j.physa.2019.123911.
  16. Ren, Y., Shi, Y. and Zhang, Y. (2017), "The effect of internal damping on the vibration stability of rotating composite shaft", J. Vib. Shock, 36(24), 181-200. https://dx.doi.org/10.13465/j.cnki.jvs.2017.23.027.
  17. Roger, D.P.M.W. De Medeiros, E.C. Rezende Pereira, A.L. and Mathias, M.H. (2017), "The dynamic analysis of rotors mounted on composite shafts with internal damping", Compos. Struct., 167, 50-62. https://doi.org/10.1016/j.compstruct.2017.01.078.
  18. Rueppel, M. Rion, J. Dransfeld, C. Fischer, C. and Masania, K. (2017), "Damping of carbon fibre and flax fibre angle-ply composite laminates", Compos. Sci. Technol., 146, 1-9. https://doi.org/10.1016/j.compscitech.2017.04.011.
  19. Singh, S.P. and Gupta, K. (2014), "Dynamic analysis of composite rotors", Int. J. Rotating Machinery, 1996(3), 179-186. https://doi.org/10.1155/S1023621X9600005X.
  20. Sourani, P. Hashemian, M. Pirmoradian, M. and Toghraie, D. (2020), "A comparison of the Bolotin and incremental harmonic balance methods in the dynamic stability analysis of an Euler-Bernoulli nanobeam based on the nonlocal strain gradient theory and surface effects", Mech. Mater., 145, 103403. https://doi.org/10.1016/j.mechmat.2020.103403.
  21. Talebitooti, M. (2017), "Three-dimensional free vibration analysis and critical speed of pressurized rotating functionally graded cylindrical shells", Iran. J. Sci. Technol. Transact. Mech. Eng., 43, 113-126. https://doi.org/10.1007/s40997-017-0115-z.
  22. Talib, A.R.A. Ali, A. Badie, M.A. Lah, N.A.C. and Golestaneh, A.F. (2010), "Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft", Mater. Des., 31(1), 514-521. https://doi.org/10.1016/j.matdes.2009.06.015.
  23. Vescovini, R. and Bisagni, C. (2015), "A procedure for the evaluation of damping effects in composite laminated structures", Progress Aeros. Sci., 78, 19-29. https://doi.org/10.1016/j.paerosci.2015.05.004.
  24. Yang, M. Gui, L. Hu, Y. Ding, G. and Song, C. (2018), "Dynamic analysis and vibration testing of cfrp drive-line system used in heavy-duty machine tool", Results Phys., 8, 1110-1118. https://doi.org/10.1016/j.rinp.2018.01.067.
  25. Zhang, H. Xie, X. and Zhao, J.L. (2011), "Parametric vibration of carbon fiber reinforced plastic cables with damping effects in long-span cable-stayed bridges", J. Vib. Control, 17(14), 2117-2130. https://doi.org/10.1177/1077546310395965.
  26. Zorica, D. Mirko, B. Snezana, V. (2017), "An investigation into hybrid aluminium/composite cardan shaft", Transact. Famena, 41(2), 45-54. https://doi.org/10.21278/TOF.41204.