Computers and Concrete

  • 제34권4호
  • /
  • Pages.393-408
  • /
  • 2024
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of RC columns strengthened with NSM and hybrid FRP under pure bending: Experimental and analytical study

  • Mohsen A. Shayanfar (School of Civil Engineering, Iran University of Science and Technology) ;
  • Mohammad Ghanooni-Bagha (Department of Civil Engineering, East Tehran Branch, Islamic Azad University) ;
  • Solmaz Afzali (School of Civil Engineering, Iran University of Science and Technology)
  • 투고 : 2023.04.26
  • 심사 : 2024.02.20
  • 발행 : 2024.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In recent decades the strengthening of reinforced concrete (RC) structural elements using Fiber-reinforced polymer (FRP) has received much attention. The behavior of RC elements can vary from axial compression to pure bending, depending on their loading. When the compressive behavior is dominant, the FRP jacket application is common, but when the flexural behavior is prevalent, the codes consider the FRP jacket ineffective. Codes suggest applying FRP bars or strips as Near-surface Mounted (NSM) or Externally Bonded (EB) in the tensile face to strengthen the beams under flexure. To strengthen the columns in tension-control mode, some researchers have suggested NSM FRP bars in both tension and compression faces alone or with the FRP jacket (hybrid). However, the number of tests that evaluate the pure bending of the strengthened columns as one of the pivotal points of the axial force-moment interaction curve is limited. In this paper, 11 RC elements strengthened using the NSM (in both tension and compression faces) or hybrid method were subjected to bending to assess the effect of the amount and material type of the FRP bar and jacket and the dimensions of the groove. The test results revealed that the NSM method increased the flexural capacity of the members between 10% to 50%. Furthermore, using the hybrid method increased the capacity between 51% to 91%. Finally, an analytical model was presented considering the effect of the NSM FRP bond in different circumstances, and its results were in good agreement with the experimental results.

키워드

과제정보

This research was sponsored by Iran University of Science and Technology, Tehran, Iran. The views expressed are those of the authors, and do not necessarily represent those of the sponsor.

참고문헌

  1. Abokwiek, R., Abdalla, J.A., Hawileh, R.A. and El Maaddawy, T. (2021), "RC columns strengthened with NSM-CFRP strips and CFRP wraps under axial and uniaxial bending: Experimental investigation and capacity models", J. Compos. Constr., 25(2), 04021009. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001117.
  2. ACI Committee 318 (2020), Building Code Requirements for Structural Concrete: (ACI 318-19) and Commentary (ACI 318R-19), American Concrete Institute, Farmington Hills, MI, USA.
  3. ACI Committee 440 (2017), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, Farmington Hills, MI, USA.
  4. Afzali, S., Alinejad, H., Nasrollahzadeh, K. and Kang, T.H.K. (2021), "Modeling of near-surface-mounted fiber-reinforced polymer strips to concrete", ACI Struct. J., 118(5), 1. http://doi.org/10.14359/51732866.
  5. Barros, J.A., Varma, R.K., Sena-Cruz, JM. and Azevedo, A.F. (2008), "Near surface mounted CFRP strips for the flexural strengthening of RC columns: Experimental and numerical research", Eng. Struct., 30(12), 3412-3425. https://doi.org/10.1016/j.engstruct.2008.05.019.
  6. Bilotta, A., Ceroni, F., Di Ludovico, M., Nigro, E., Pecce, M. and Manfredi, G. (2011), "Bond efficiency of EBR and NSM FRP systems for strengthening concrete members", J. Compos. Constr., 15(5), 757-772. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000204.
  7. Bournas, D.A. and Triantafillou, T.C. (2009), "Flexural strengthening of RC columns with NSM FRP or stainless steel", ACI Struct. J., 106(4), 495-505. https://doi.org/10.14359/56615
  8. Chellapandian, M. and Prakash, S.S. (2018), "Rapid repair of severely damaged reinforced concrete columns under combined axial compression and flexure: An experimental study", Constr. Build. Mater., 173, 368-380. https://doi.org/10.1016/j.conbuildmat.2018.04.037.
  9. Chellapandian, M., Prakash, S.S. and Sharma, A. (2017), "Strength and ductility of innovative hybrid NSM reinforced and FRP confined short RC columns under axial compression", Compos. Struct., 176, 205-216. https://doi.org/10.1016/j.compstruct.2017.05.033.
  10. Chellapandian, M., Prakash, S.S. and Sharma, A. (2019a), "Experimental investigation of the effectiveness of hybrid FRP-strengthened RC columns on axial compression-bending interaction behavior", J. Compos. Constr., 23(4), 04019025. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000952.
  11. Chellapandian, M., Prakash, S.S., Mahadik, V. and Sharma, A. (2019b), "Experimental and numerical studies on effectiveness of hybrid FRP strengthening on behavior of RC columns under high eccentric compression", J. Bridge Eng., 24(6), 04019048. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001420.
  12. De Lorenzis, L. and Teng, J.G. (2007), "Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures", Compos. Part B, 38(2), 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003.
  13. De Lorenzis, L., Nanni, A. and La Tegola, A. (2000), "Strengthening of reinforced concrete structures with near surface mounted FRP rods", International Meeting on Composite Materials, PLAST 2000, Milan, Italy, May.
  14. Diab, H.M., Abdelaleem, T. and Rashwan, M.M. (2020), "Moment redistribution and flexural performance of RC continuous T-beams strengthened with NSM FRP or steel bars", Struct., 28, 1516-1538). https://doi.org/10.1016/j.istruc.2020.09.003.
  15. Ding, L., Wu, G., Yang, S. and Wu, Z. (2013), "Performance advancement of RC columns by applying basalt FRP composites with NSM and confinement system", J. Earthq. Tsunami, 7(2), 1350007. https://doi.org/10.1142/S1793431113500073.
  16. Ehsani, M.R. (1993), "Glass-fiber reinforcing bars", Alternative Materials for the Reinforcement and Prestressing of Concrete, Blackie Academic & Professional, London, UK.
  17. Gajdosova, K. and Bilcik, J. (2013), "Full-scale testing of CFRP-strengthened slender reinforced concrete columns", J. Compos. Constr., 17(2), 239-248. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000329.
  18. Gopal, R., Krishnachandran, S. and Bharatkumar, B.H. (2020), "Monotonic and cyclic response of hybrid fibre reinforced polymer reinforcing system for reinforced concrete columns under eccentric loading", Adv. Struct. Eng., 23(16), 3456-3468. https://doi.org/10.1177/1369433220939209.
  19. Haji, M., Naderpour, H. and Kheyroddin, A. (2019), "Experimental study on influence of proposed FRP-strengthening techniques on RC circular short columns considering different types of damage index", Compos. Struct., 209, 112-128. https://doi.org/10.1016/j.compstruct.2018.10.088.
  20. Haryanto, Y., Hu, H.T., Han, A.L., Hsiao, F.P., Teng, C.J., Hidayat, B.A. and Nugroho, L. (2021), "Numerical investigation on RC T-beams strengthened in the negative moment region using NSM FRP rods at various depth of embedment", Comput. Concrete, 28(4), 347-360. https://doi.org/10.12989/cac.2021.28.4.347.
  21. Hassan, T. and Rizkalla, S. (2004), "Bond mechanism of NSM FRP bars for flexural strengthening of concrete structures", ACI Struct. J., 101(6), 830-839.
  22. Kankeri, P. and Prakash, S.S. (2016), "Experimental evaluation of bonded overlay and NSM GFRP bar strengthening on flexural behavior of precast prestressed hollow core slabs", Eng. Struct., 120, 49-57. https://doi.org/10.1016/j.engstruct.2016.04.033.
  23. Khalifa, A.M. (2016), "Flexural performance of RC beams strengthened with near surface mounted CFRP strips", Alexandria Eng. J., 55(2), 1497-1505. https://doi.org/10.1016/j.aej.2016.01.033.
  24. Khorramian, K. and Sadeghian, P. (2019), "Performance of high-modulus near-surface-mounted FRP laminates for strengthening of concrete columns", Compos. Part B, 164, 90-102. https://doi.org/10.1016/j.compositesb.2018.11.064.
  25. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X.
  26. Lee, D., Cheng, L. and Yan-Gee Hui, J. (2013), "Bond characteristics of various NSM FRP reinforcements in concrete", J. Compos. Constr., 17(1), 117-129. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000318.
  27. Malleswara Rao, B.T. and Prakash, S.S. (2021), "Shape effects on the behavior of hybrid FRP-strengthened rectangular RC columns under axial compression", J. Compos. Constr., 25(5), 04021042. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001152.
  28. Mostofinejad, D., Salimian, M.S., Taherirani, M. and Noroozolyaee, M. (2021), "Behavior of square slender RC columns strengthened with longitudinal FRP sheets subjected to eccentric loading", J. Compos. Constr., 25(2), 04021006. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001116.
  29. Nasrollahzadeh, K. and Afzali, S. (2018), "Fuzzy logic model for pullout capacity of near-surface-mounted FRP reinforcement bonded to concrete", Neural.Comput. Appl., 31, 7837-7865. https://doi.org/10.1007/s00521-018-3590-2.
  30. Obaidat, Y.T., Ashteyat, A.M. and Alfaris, S.F. (2020), "A new technique for repairing reinforced concrete columns", J. Build. Eng., 30, 101256. https://doi.org/10.1016/j.jobe.2020.101256.
  31. Obaidat, Y.T., Barham, W.S. and Attar, K.M. (2021), "Behavior of NSM CFRP reinforced concrete columns: Experimental and analytical work", Case Stud. Constr. Mater., 15, e00589. https://doi.org/10.1016/j.cscm.2021.e00589.
  32. Olivova, K. and Bilcik, J. (2009), "Strengthening of concrete columns with CFRP", SJCE, 1, 1-9.
  33. Perrone, M., Barros, J.A. and Aprile, A. (2009), "CFRP-based strengthening technique to increase the flexural and energy dissipation capacities of RC columns", J. Compos. Constr., 13(5), 372-383. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000031.
  34. Rasheed, H.A. (2014), Strengthening Design of Reinforced Concrete with FRP, CRC Press, Boca Raton, FL, USA.
  35. Sarafraz, M. and Danesh, N. (2010), "Experimental study on flexural strengthening of RC columns with near surface mounted FRP bars", JSEE, 12(1-2), 39-50.
  36. Scott, B.D., Park, R. and Priestley, M.J. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Proc., 79(1), 13-27. https://doi.org/10.14359/10875.
  37. Seracino, R., Jones, N.M., Ali, M.S., Page, M.W. and Oehlers, D.J. (2007), "Bond strength of near-surface mounted FRP strip-to-concrete joints", J. Compos. Constr., 11(4), 401-409. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:4(401).
  38. Sharaky, I.A., Baena, M., Barris, C., Sallam, H.E.M. and Torres, L. (2018), "Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study", Eng. Struct., 173, 987-1001. https://doi.org/10.1016/j.engstruct.2018.07.062.
  39. Sharaky, I.A., Torres, L., Baena, M. and Vilanova, I. (2013), "Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete", Constr. Build. Mater., 38, 890-902. https://doi.org/10.1016/j.conbuildmat.2012.09.015.
  40. Sharaky, I.A., Torres, L., Comas, J. and Barris, C. (2014), "Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars", Compos. Struct., 109, 8-22. https://doi.org/10.1016/j.compstruct.2013.10.051.
  41. Shayanfar, M.A., Ghanooni-Bagha, M. and Afzali, S. (2024a), "Reinforced concrete columns strengthened with near-surface mounted and hybrid FRP under compression with or without eccentricity: Experimental study and finite element modeling", Case Stud. Constr. Mater., 20, e02761. https://doi.org/10.1016/j.cscm.2023.e02761.
  42. Shayanfar, M.A., Ghanooni-Bagha, M. and Afzali, S. (2024b), "Proposing an improved TSK fuzzy model applicable for incomplete data and using it for capacity prediction of RC columns strengthened with NSM or hybrid FRP method", Compos. Part C Open Access, 13, 100441. https://doi.org/10.1016/j.jcomc.2024.100441.
  43. Sokairge, H., Elgabbas, F. and Elshafie, H. (2022), "Structural behavior of RC beams strengthened with prestressed near surface mounted technique using basalt FRP bars", Eng. Struct., 250, 113489. https://doi.org/10.1016/j.engstruct.2021.113489.
  44. Soliman, S.M., El-Salakawy, E. and Benmokrane, B. (2010), "Flexural behaviour of concrete beams strengthened with near surface mounted fibre reinforced polymer bars", Can. J. Civil Eng., 37(10), 1371-1382. https://doi.org/10.1139/L10-077.
  45. Su, M., Gong, S., Liu, Y. and Peng, H. (2022), "Flexural behavior of RC beams strengthened with fully or partially prestressed near-surface mounted FRP strips: An experimental investigation", Eng. Struct., 262, 114345. https://doi.org/10.1016/j.engstruct.2022.114345.
  46. Teng, J.G., De Lorenzis, L., Wang, B., Li, R., Wong, T.N. and Lam, L. (2006), "Debonding failures of RC beams strengthened with near surface mounted CFRP strips", J. Compos. Constr., 10(2), 92-105. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:2(92).
  47. Torres, L., Sharaky, I.A., Barris, C. and Baena, M. (2016), "Experimental study of the influence of adhesive properties and bond length on the bond behaviour of NSM FRP bars in concrete", J. Civil Eng. Manag., 22(6), 808-817. https://doi.org/10.3846/13923730.2014.914097.
  48. Vebo, A. and Ghali, A. (1977), "Moment-curvature relation of reinforced concrete slabs", J. Struct. Div., 103(3), 515-531. https://doi.org/10.1061/JSDEAG.0004579.
  49. Wang, Q., Li, T., Zhu, H., Su, W. and Hu, X. (2020), "Bond enhancement for NSM FRP bars in concrete using different anchorage systems", Constr. Build. Mater., 246, 118316. https://doi.org/10.1016/j.conbuildmat.2020.118316.
  50. Wang, Q., Zhu, H., Li, T., Wu, G. and Hu, X. (2019), "Bond performance of NSM FRP bars in concrete with an innovative additional ribs anchorage system: An experimental study", Constr. Build. Mater., 207, 572-584. https://doi.org/10.1016/j.conbuildmat.2019.02.020.
  51. Welch, G.B. and Haisman, B. (1969), Fracture Toughness Measurement of Concrete, Report No. R-42; University of New South Wales, New South Wales, Australia.
  52. Zhang, S.S. and Yu, T. (2017), "Effect of groove spacing on bond strength of near-surface mounted (NSM) bonded joints with multiple FRP strips", Constr. Build. Mater., 155, 103-113. https://doi.org/10.1016/j.conbuildmat.2017.08.064.