Smart Structures and Systems

  • 제34권1호
  • /
  • Pages.41-50
  • /
  • 2024
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Measurement of temperature change on coil column unit using FBG sensors during thermal response test: A study for geothermal energy system

  • Young-Sang Kim (Department of Civil Engineering, Chonnam National University) ;
  • Duc-Thang Hoang (Department of Civil Engineering, Chonnam National University) ;
  • Gyeong-O Kang (Department of Civil Engineering, Gwangju University) ;
  • Ba Huu Dinh (Department of Civil Engineering, Chonnam National University)
  • 투고 : 2024.05.21
  • 심사 : 2024.08.20
  • 발행 : 2024.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The accurate measurement of temperature in the ground source heat pump system is crucial for assessing the thermal response of the system and validating the numerical model for parametric study, which is necessary for the thermal performance evaluation of the geothermal energy system. Conventional temperature sensors have some disadvantages such as they are difficult to install, and their position can be shifted during the backfill process of the ground heat exchanger. In this study, Fiber Bragg Grating (FBG) sensors were used to measure the temperature change of a recently developed ground heat exchanger (Coil Column Unit, CCU). FBG sensors were first calibrated in a thermal chamber alongside a correlation sensor (RTD sensor). The calibrated sensors were then mounted on the pipe surface at each spiral of the CCU to measure how temperature changes during the in-door mockup thermal response test. Finally, the measurement results of the FBG sensors were verified with a finite element coded program. The results indicated that the temperature difference between the numerical analysis and the experiment was less than 1%, which is significantly lower than that of the previous study using the RTD sensors. Therefore, it is feasible to apply FBG sensors for temperature measurement during the operation of the TRT of the geothermal energy system.

키워드

과제정보

The research described in this paper was financially supported by the Basic Research Laboratory (BRL) research grant from the National Research Foundation of Korea (NRF) (No. 2022R1A4A1033838).

참고문헌

  1. Bharathwaj, V., Markan, A., Atrey, M., Neumann, H. and Ramalingam, R. (2014), "Fiber Bragg Gratings for distributed cryogenic temperature measurement in a tube in tube helically coiled heat exchanger", In: Sensors, pp. 1535-1538. https://doi.org/10.1109/ICSENS.2014.6985308 
  2. Chen, Y., Mo, S., Li, W., Huang, L., Wen, S. and He, Z. (2023), "Applications of distributed fiber Bragg gratings to the measurements of in-tube fluid temperature distribution", Appl. Thermal Eng., 220, 119724. https://doi.org/10.1016/J.APPLTHERMALENG.2022.119724 
  3. Cheng-Yu, H., Yi-Fan, Z., Meng-Xi, Z., Lai, L., Gordon, M. and Li-Qiang, L. (2016), "Application of FBG sensors for geotechnical health monitoring, a review of sensor design, implementation methods and packaging techniques", Sensors Actuat. A, 244, 184-197. https://doi.org/10.1016/j.sna.2016.04.033 
  4. Chong, C.S.A., Gan, G., Verhoef, A., Garcia, R.G. and Vidale, P.L. (2013), "Simulation of thermal performance of horizontal slinky-loop heat exchangers for ground source heat pumps", Appl. Energy, 104, 603-610. https://doi.org/10.1016/j.apenergy.2012.11.069 
  5. Churchill, S.W. (1977), "Friction-factor equation spans all fluid-flow regimes", In: Chemical Engineering, New York, 84, 91-92. 
  6. Congedo, P.M., Colangelo, G. and Starace, G. (2012), "CFD simulations of horizontal ground heat exchangers: A comparison among different configurations", Appl. Thermal Eng., 33-34, 24-32. https://doi.org/10.1016/j.applthermaleng.2011.09.005 
  7. Dinh, B.H., Kim, Y.S. and Kang, G.O. (2020), "Thermal conductivity of steelmaking slag-based controlled low-strength materials over entire range of degree of saturation: A study for ground source heat pump systems", Geothermics, 88, 101910. https://doi.org/10.1016/j.geothermics.2020.101910 
  8. Dinh, B.H., Go, G.H. and Kim, Y.S. (2021), "Performance of a horizontal heat exchanger for ground heat pump system: Effects of groundwater level drop with soil-water thermal characteristics", Appl. Thermal Eng., 195, 117203. https://doi.org/10.1016/j.applthermaleng.2021.117203 
  9. Dinh, B.H., Kim, Y.S. and Yoon, S. (2022), "Experimental and numerical studies on the performance of horizontal U-type and spiral-coil-type ground heat exchangers considering economic aspects", Renew. Energy, 186, 505-516. https://doi.org/10.1016/j.renene.2022.01.001 
  10. Dinh, H.B., Nguyen, C.H., Kim, H.K. and Kim, Y.S. (2023), "Consistency in thermal conductivity measured via lab-, field-scale test, and numerical simulation for newly developed backfill materials for underground power cable system", Thermal Sci. Eng. Progress, 46, 102205. https://doi.org/10.1016/j.tsep.2023.102205 
  11. Jerez Lazo, C., Lee, N., Tripathi, P., Joykutty, L., Jayachandran, K. and Lee, S.J. (2024), "A fungus-based soil improvement using Rhizopus oryzae inoculum", Int. J. Geo-Eng., 15. https://doi.org/10.1186/s40703-024-00218-0 
  12. Jing, Z. and Yongqian, L. (2009), "Calibration method for fiber Bragg grating temperature sensor", ICEMI 2009 - Proceedings of 9th International Conference on Electronic Measurement and Instruments, pp. 2822-2825. https://doi.org/10.1109/ICEMI.2009.5274437 
  13. Kersey, A.D., Davis, M.A., Patrick, H.J., LeBlanc, M., Koo, K.P., Askins, C.G., Putnam, M.A. and Friebele, E.J. (1997), "Fiber grating sensors", J. Lightwave Technol., 15, 1442-1462. https://doi.org/10.1109/50.618377
  14. Kim, H., Kang, D. and Kim, D.H. (2017), "Mechanical strength of FBG sensor exposed to cyclic thermal load for structural health monitoring", Smart Struct. Syst., Int. J., 19(3), 335-340. https://doi.org/10.12989/sss.2017.19.3.335
  15. Kim, Y.S., Dinh, B.H., Do, T.M. and Kang, G.O. (2020), "Development of thermally enhanced controlled low-strength material incorporating different types of steel-making slag for ground-source heat pump system", Renewable Energy, 150, 116-127. https://doi.org/10.1016/j.renene.2019.12.129
  16. Kim, Y.S., Dinh, H.B., Kang, G.O. and Hoang, D.T. (2023), "Performance evaluation of a novel horizontal ground heat exchanger: Coil-column system", J. Build. Eng., 76, p. 107180. https://doi.org/10.1016/j.jobe.2023.107180
  17. Kumar, J., Prakash, O., Agrawal, S.K., Mahakud, R., Mokhariwale, A., Dixit, S.K. and Nakhe, S.V. (2016), "Distributed fiber Bragg grating sensor for multipoint temperature monitoring up to 500℃ in high-electromagnetic interference environment", Optical Eng., 55(9), 090502-090502. https://doi.org/10.1117/1.OE.55.9.090502
  18. Larwa, B. and Kupiec, K. (2020), "Determination of pipe wall temperature in a slinky-coil ground heat exchanger", Int. J. Heat Mass Transfer, 160, p. 120202. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120202
  19. Lee, J.H., Kim, S.G., Park, H.J. and Song, M. (2006), "Investigation of Fiber Bragg grating temperature sensor for applications in electric power systems", Proceedings of the IEEE International Conference on Properties and Applications of Dielectric Materials, pp. 431-434. https://doi.org/10.1109/ICPADM.2006.284207
  20. Li, H., Nagano, K. and Lai, Y. (2012), "A new model and solutions for a spiral heat exchanger and its experimental validation", J. Heat Mass Transfer, 55(15-16), 4404-4414. https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.084
  21. Li, G., Feng, F., Wang, F. and Wei, B. (2022), "Temperature field measurement of photovoltaic module based on fiber Bragg grating sensor array", Materials, 15(15), p. 5324. https://doi.org/10.3390/ma15155324
  22. Marrah, M.Y., Fall, M. and Almansour, H. (2023), "Numerical simulation of ground thermal response in Canadian seasonal frost regions to climate warming", Int. J. Geo-Eng., 14(1), p. 16. https://doi.org/10.1186/s40703-023-00196-9
  23. Montagud, C., Corberan, J.M. and Ruiz-Calvo, F. (2013), "Experimental and modeling analysis of a ground source heat pump system", Appl. Energy, 109, 328-336. https://doi.org/10.1016/J.APENERGY.2012.11.025
  24. Multiphysics, C. (2015), COMSOL Multiphysics®v. 5.3. COMSOL AB, Stockholm, Sweden.
  25. Nations, U., n.d. Renewable energy - powering a safer future | United Nations. 
  26. Nguyen, A.D., Nguyen, V.T. and Kim, Y.S. (2023), "Finite element analysis on dynamic behavior of sheet pile quay wall dredged and improved seaside subsoil using cement deep mixing", Int. J. Geo-Eng., 14(1), p. 9. https://doi.org/10.1186/s40703-023-00186-x 
  27. Olabode, O.P. and San, L.H. (2023), "Analysis of soil electrical resistivity and hydraulic conductivity relationship for characterisation of lithology inducing slope instability in residual soil", Int. J. Geo-Eng., 14(1), p. 7. https://doi.org/10.1186/s40703-023-00184-z 
  28. Raab, S., Mangold, D. and Muller-Steinhagen, H. (2005), "Validation of a computer model for solar assisted district heating systems with seasonal hot water heat store", Solar Energy, 79(5), 531-543. https://doi.org/10.1016/j.solener.2004.10.014 
  29. Ren, L., Li, H., Sun, L. and Li, D. (2004), "FBG sensors for online temperature measurements", In: Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Vol. 5391, pp. 94-99. https://doi.org/10.1117/12.538749 
  30. REN21 (2023), Renewables in Energy Demand [WWW Document]. Renewables 2023 Global Status Report Collection. URL https://www.ren21.net/gsr-2023/modules/energy_demand/ (accessed 3.24.24). 
  31. Shah, S.K., Aye, L. and Rismanchi, B. (2022), "Validations of a double U-tube borehole model and a seasonal solar thermal energy storage system model", Renew. Energy, 201, 462-485. https://doi.org/10.1016/J.RENENE.2022.10.109 
  32. Talebinejad, I., Fischer, C. and Ansari, F. (2009), "Serially multiplexed FBG accelerometer for structural health monitoring of bridges", Smart Struct. Syst., Int. J., 5(4), 345-355. https://doi.org/10.12989/sss.2009.5.4.345 
  33. Venkatesan, V.N. and Ramalingam, R. (2017), "Numerical and experimental investigation of FBG strain response at cryogenic temperatures", In: IOP Conference Series: Materials Science and Engineering, Vol. 171, No. 1, p. 012133. https://doi.org/10.1088/1757-899X/171/1/012133 
  34. Wang, L., Han, J. and Song, Y. (2014), "Fatigue performance monitoring of full-scale PPC beams by using the FBG sensors", Smart Struct. Syst., Int. J., 13(6), 943-957. https://doi.org/10.12989/sss.2014.13.6.943 
  35. Werneck, M.M. (2013), "A guide to fiber bragg grating sensors, in current trends in shortand long period fiber gratings", IntechOpen 1-24. 
  36. Woo, H.J. and Go, G.H. (2024), "Mechanical behavior assessment of retaining wall structure due to frost heave of frozen ground", Int. J. Geo-Eng., 15(1), p. 7. https://doi.org/10.1186/s40703-024-00210-8 
  37. Wu, Y., Gan, G., Verhoef, A., Vidale, P.L. and Gonzalez, R.G. (2010), "Experimental measurement and numerical simulation of horizontal-coupled slinky ground source heat exchangers", Appl. Thermal Eng., 30, 2574-2583. https://doi.org/10.1016/j.applthermaleng.2010.07.008 
  38. Yang, W., Xu, R., Wang, F. and Chen, S. (2020), "Experimental and numerical investigations on the thermal performance of a horizontal spiral-coil ground heat exchanger", Renew. Energy, 147, 979-995. https://doi.org/10.1016/j.renene.2019.09.030 
  39. Zhang, X., Liang, D., Zeng, J. and Lu, J. (2014), "SVR model reconstruction for the reliability of FBG sensor network based on the CFRP impact monitoring", Smart Struct. Syst., Int. J., 14(2), 145-158. https://doi.org/10.12989/sss.2014.14.2.145