Acknowledgement
이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.
References
- 환경부, 2022, 2021 년 부문별 배출량.
- Rivard, E., Trudeau, M. and Zaghib, K., 2019, "Hydrogen storage for mobility: A review," Materials, Vol. 12(12), pp. 1973.
- Furuhama, S., Hiruma, M. and Enomoto, Y., 1978, "Development of a liquid hydrogen car," International Journal of Hydrogen Energy, Vol. 3(1), pp. 61-81.
- Preuster, P., Alekseev, A. and Wasserscheid, P., 2017, "Hydrogen storage technologies for future energy systems," Annual review of chemical and biomolecular engineering, Vol. 8, pp. 445-471.
- Choi, S. W., Lee, W. I. and Kim, H. S., 2017, "Numerical analysis of convective flow and thermal stratification in a cryogenic storage tank," Numerical Heat Transfer, Part A: Applications, Vol. 71(4), pp. 402-422.
- Jeon, G.-M., Park, J.-C. and Choi, S., 2021, "Multiphase-thermal simulation on BOG/BOR estimation due to phase change in cryogenic liquid storage tanks," Applied Thermal Engineering, Vol. 184, pp. 116264.
- Babac, G., Sisman, A. and Cimen, T., 2009, "Two-dimensional thermal analysis of liquid hydrogen tank insulation," International Journal of Hydrogen Energy, Vol. 34(15), pp. 6357-6363.
- Liu, Z., Feng, Y., Lei, G. and Li, Y., 2019, "Fluid sloshing dynamic performance in a liquid hydrogen tank," International Journal of Hydrogen Energy, Vol. 44(26), pp. 13885-13894.
- Sparrow, E. M. and Husar, R., 1969, "Longitudinal vortices in natural convection flow on inclined plates," Journal of Fluid Mechanics, Vol. 37(2), pp. 251-255.
- Vasseur, P., Satish, M. and Robillard, L., 1987, "Natural convection in a thin, inclined, porous layer exposed to a constant heat flux," International Journal of Heat and Mass Transfer, Vol. 30(3), pp. 537-549.
- Bilgen, E. and Oztop, H., 2005, "Natural convection heat transfer in partially open inclined square cavities," International Journal of Heat and Mass Transfer, Vol. 48(8), pp. 1470-1479.
- Henze, M., Von Wolfersdorf, J., Weigand, B., Dietz, C. and Neumann, S., 2011, "Flow and heat transfer characteristics behind vortex generators-a benchmark dataset," International Journal of Heat and Fluid Flow, Vol. 32(1), pp. 318-328.
- Awais, M. and Bhuiyan, A. A., 2018, "Heat transfer enhancement using different types of vortex generators (VGs): A review on experimental and numerical activities," Thermal Science and Engineering Progress, Vol. 5, pp. 524-545.
- Tanda, G., 1997, "Natural convection heat transfer in vertical channels with and without transverse square ribs," International Journal of Heat and Mass Transfer, Vol. 40(9), pp. 2173-2185.
- Khurana, T. K., Prasad, B., Ramamurthi, K. and Murthy, S. S., 2006, "Thermal stratification in ribbed liquid hydrogen storage tanks," International Journal of Hydrogen Energy, Vol. 31(15), pp. 2299-2309.
- Xia, S., Li, Y. and Xie, F., 2023, "Numerical study on particle distribution characteristics of slush hydrogen in a cryogenic tank," International Journal of Hydrogen Energy, Vol. 48(40), pp. 15280-15291.
- Kumar, S. P., Prasad, B. V. S. S. S., Venkatarathnam, G., Ramamurthi, K. and Murthy, S. S., 2007, "Influence of surface evaporation on stratification in liquid hydrogen tanks of different aspect ratios," International Journal of Hydrogen Energy, Vol. 32(12), pp. 1954-1960.
- Jeong, J. and Hussain, F., 1995, "On the identification of a vortex," Journal of Fluid Mechanics, Vol. 285, pp. 69-94.
- Hwang, J. and Sung, H. J., 2018, "Wall-attached structures of velocity fluctuations in a turbulent boundary layer," Journal of Fluid Mechanics, Vol. 856, pp. 958-983.
- Park, S. and Hwang, J., 2023, "Analysis of droplet formation under sloshing phenomena in liquid fuel tank," Journal of the Korean Society of Visualization, Vol. 21(2), pp. 102-110.