DOI QR코드

DOI QR Code

Experimental and numerical study on mechanical behavior of RC shear walls with precast steel-concrete composite module in nuclear power plant

  • Haitao Xu (State Key Laboratory of Nuclear Power Safety Technology and Equipment) ;
  • Jinbin Xu (School of Civil Engineering, Guangzhou University) ;
  • Zhanfa Dong (State Key Laboratory of Nuclear Power Safety Technology and Equipment) ;
  • Zhixin Ding (State Key Laboratory of Nuclear Power Safety Technology and Equipment) ;
  • Mingxin Bai (State Key Laboratory of Nuclear Power Safety Technology and Equipment) ;
  • Xiaodong Du (State Key Laboratory of Nuclear Power Safety Technology and Equipment) ;
  • Dayang Wang (School of Civil Engineering, Guangzhou University)
  • Received : 2023.08.23
  • Accepted : 2024.01.28
  • Published : 2024.06.25

Abstract

Reinforced concrete (RC) shear walls with precast steel-concrete composite modular (PSCCM) are strongly recommended in the structural design of nuclear power plants due to the need for a large number of process pipeline crossings and industrial construction. However, the effect of the PSCCM on the mechanical behavior of the whole RC shear wall is still unknown and has received little attention. In this study, three 1:3 scaled specimens, one traditional shear wall specimen (TW) and two shear wall specimens with the PSCCM (PW1, PW2), were designed and investigated under cyclic loadings. The failure mode, hysteretic curve, energy dissipation, stiffness and strength degradations were then comparatively investigated to reveal the effect of the PSCCM. Furthermore, numerical models of the RC shear wall with different PSCCM distributions were analyzed. The results show that the shear wall with the PSCCM has comparable mechanical properties with the traditional shear wall, which can be further improved by adding reinforced concrete constraints on both sides of the shear wall. The accumulated energy dissipation of the PW2 is higher than that of the TW and PW1 by 98.7 % and 60.0 %. The failure of the shear wall with the PSCCM is mainly concentrated in the reinforced concrete wall below the PSCCM, while the PSCCM maintains an elastic working state as a whole. Shear walls with the PSCCM arranged in the high stress zone will have a higher load-bearing capacity and lateral stiffness, but will suffer a higher risk of failure. The PSCCM in the low stress zone is always in an elastic working state.

Keywords

Acknowledgement

This project is supported by the National Natural Science Foundation of China (52178467, 52378496), and Science Research Projects of Guangzhou City (202235058).

References

  1. G.H. Lim, W.J. Jung, T.H. Kim, S.Y.T. Lee, The cognitive and economic value of a nuclear power plant in Korea, Nucl. Eng. Technol. 49 (2017) 609-620, https://doi.org/10.1016/J.NET.2016.10.007.
  2. A. Ali, D. Kim, D.S.G. Cho, Modeling of nonlinear cyclic load behavior of I-shaped composite steel-concrete shear walls of nuclear power plants, Nucl. Eng. Technol. 45 (1) (2013) 89-98, https://doi.org/10.5516/NET.09.2011.055.
  3. Y. Yang, J. Liu, J. Fan, Buckling behavior of double-skin composite walls: an experimental and modeling study, J. Constr. Steel Res. 121 (2016) 126-135, https://doi.org/10.1016/j.jcsr.2016.01.019.
  4. M. Liu, G. Yuan, Q. Shu, Y. Zhang, L. Lu, Experimental and numerical investigation on the seismic behaviors of RC shear walls with multiple post-openings before and after strengthening by steel plates, Eng. Struct. 279 (2023) 115552, https://doi.org/10.1016/j.engstruct.2022.115552.
  5. V. Todea, D. Dan, S.C. Florut, V. Stoian, Experimental investigations on the seismic behavior of composite steel concrete coupled shear walls with central openings, Structures 33 (2021) 878-896, https://doi.org/10.1016/j.istruc.2021.04.074.
  6. F.A. Zarrinkolaei, A. Naseri, S. Gholampour, Numerical assessment of effect of opening on behavior of perforated steel shear walls, J. Constr. Steel Res. 181 (2021) 106587, https://doi.org/10.1016/j.jcsr.2021.106587.
  7. L.M. Massone, G. Munoz, ˜ F. Rojas, Experimental and numerical cyclic response of RC walls with openings, Eng. Struct. 178 (2019) 318-330, https://doi.org/10.1016/j.engstruct.2018.10.038.
  8. M. Mosoarca, Failure analysis of RC shear walls with staggered openings under seismic loads, Eng. Fail. Anal. 41 (2014) 48-64, https://doi.org/10.1016/j.engfailanal.2013.07.037.
  9. B. Li, K. Qian, H. Wu, Flange effects on seismic performance of reinforced concrete squat walls with irregular or regular openings, Eng. Struct. 110 (2016) 127-144, https://doi.org/10.1016/j.engstruct.2015.11.051.
  10. O. Masayuki, T. Ikuo, A proposal of reducing rate for strength due to opening effect of reinforced concrete framed shear walls, J. Struct. Constr. Eng. 435 (1992) 119-129, https://doi.org/10.3130/aijsx.435.0_119.
  11. N.M. Ho, J.H. Doh, S. Fragomeni, J. Yang, K. Yan, M. Guerrieri, Prediction of axial load capacity of concrete walls with openings restrained on three sides, Structures 27 (2020) 1860-1875, https://doi.org/10.1016/j.istruc.2020.08.011.
  12. M.A. Barkhordari, S.A. Asghar Hosseinzadeh, M. Seddighi, Behavior of steel plate shear walls with stiffened full-height rectangular openings, Asian J. Civil Eng. 15 (5) (2014) 741-759.
  13. S. Sabouri-Ghomi, S. Mamazizi, Experimental investigation on stiffened steel plate shear walls with two rectangular openings, Thin-Walled Struct. 86 (2015) 56-66, https://doi.org/10.1016/j.tws.2014.10.005.
  14. X. Zhao, P. Tan, Y. Lin, O. Mercan, F. Zhou, Y. Li, Theoretical and experimental investigations of steel plate shear walls with diamond opening, Thin-Walled Struct. 189 (2023) 110838, https://doi.org/10.1016/j.tws.2023.110838.
  15. S.A. Hosseini, A. Kheyroddin, M. Mastali, An experimental investigation into the impacts of eccentric openings on the in-plane behavior of squat RC shear walls, Eng. Struct. 197 (2019) 109410, https://doi.org/10.1016/j.engstruct.2019.109410.
  16. Y. Zhang, G. Yuan, Q. Shu, M. Zhu, L. Lu, Investigation on seismic behavior of RC shear walls with multiple post-construction openings based on experiment and simulation, J. Build. Eng. 46 (2022) 103707, https://doi.org/10.1016/j.jobe.2021.103707.
  17. H.F. Du, Study on Seismic Strengthening Technology of Shear Wall with Post-construction Opening, China University of Mining and Technology, Xuzhou, 2020 001397, https://doi.org/10.27623/d.cnki.gzkyu.2020. Chinese.
  18. J. Wang, M. Sakashita, S. Kono, H. Tanaka, Shear behaviour of reinforced concrete structural walls with eccentric openings under cyclic loading: experimental study, Struct. Des. Tall Special Build. 21 (9) (2012) 669-681, https://doi.org/10.1002/tal.639.
  19. J. Wang, M. Sakashita, S. Kono, H. Tanaka, W. Lou, Behavior of reinforced concrete structural walls with various opening locations: experiments and macro model, J. Zhejiang Univ. - Sci. 11 (3) (2010) 202-211, https://doi.org/10.1631/jzus.A0900400.
  20. M. Gopalarathnam, M. Kumar, Nonlinear finite element dynamic analysis of squat shear wall with openings, Int J Adv Struct Eng 5 (2013) 1-20, https://doi.org/10.1186/2008-6695-5-27.
  21. H.J. Yu, S.M. Kang, H.G. Park, L. Chung, Cyclic loading test of structural walls with small openings, Int J Concr Struct Mater 13 (1) (2019) 1-14, https://doi.org/10.1186/s40069-019-0352-1.
  22. G. Li, M. Liu, Z. Pan, L. Lu, G. Yuan, Strengthening effect of steel plates on seismic behaviors of RC shear walls with various size post-openings, Structures 51 (2023) 814-827, https://doi.org/10.1016/j.istruc.2023.03.056.
  23. M.M. Lima, J.H. Doh, M.N.S. Hadi, Experimental study on RC walls with opening strengthened by externally bonded CFRP, J. Compos. Construct. 23 (2) (2019) 04019008, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000930.
  24. A.S. Mosallam, A. Nasr, Structural performance of RC shear walls with post-construction openings strengthened with FRP composite laminates, Compos. B Eng. 115 (2017) 488-504, https://doi.org/10.1016/j.compositesb.2016.06.063.
  25. Code for Design of Concrete Structures, GB 50010, China Architecture & Building Press, Beijing, China, 2011 (in Chinese).
  26. Specification for Seismic Test of Buildings, JGJ/T 101, China Architecture & Building Press, Beijing, China, 2015 (in Chinese).
  27. J. Cui, Research and Experimental Verification of Deformation Index Limits of RC Beams, Columns and Shear Walls, South China University of Technology, Guangzhou, 2017. Chinese.
  28. P. Feng, H.L. Qiang, L.P. Ye, Discussion and definition on yield points of materials, members and structures, Eng. Mech. 34 (3) (2017) 36-46, https://doi.org/10.6052/j.issn.1000-4750.2016.03.0192 (in Chinese).
  29. D. Wang, C. Wu, Y. Zhang, G. Xue, Y. Xu, Study on seismic performance of a precast buckling-restrained composite shear wall system with three assembly arrangements, Bull. Earthq. Eng. 18 (2020) 4839-4872, https://doi.org/10.1007/s10518-020-00877-1.
  30. L. Sun, H. Guo, Y. Liu, Study on seismic behavior of steel frame with external hanging concrete walls containing recycled aggregates, Construct. Build. Mater. 157 (2017) 790-808, https://doi.org/10.1016/j.conbuildmat.2017.09.152.
  31. S. Jin, J. Ou, J.Y.R. Liew, Stability of buckling-restrained steel plate shear walls with inclined-slots: theoretical analysis and design recommendations, J. Constr. Steel Res. 117 (2016) 13-23, https://doi.org/10.1016/j.jcsr.2015.10.002.
  32. K.W. Ding, Y. Ye, Experiment and numerical simulation on seismic performance of new type of prefabricated concrete beam-column joint, J. Archit. Civ. Eng. 38 (4) (2021) 24-32, https://doi.org/10.19815/j.jace.2020.10073 (in Chinese).
  33. J. Xu, Research on Seismic Behavior of Precast Steel Modular Composite Shear Wall, Guangzhou University, Guangzhou, 2023. Chinese.
  34. D. Wang, Y. Zhang, Y. Zhu, C. Wu, Y. Zhou, Q. Han, Mechanical performance of sustainable modular prefabricated composite shear panels under cyclic loading, J. Constr. Steel Res. 179 (2021) 106423.
  35. Z. Qu, L. Ye, Strength deterioration model based on effective hysteretic energy dissipation for RC members under cyclic loading, Eng. Mech. 28 (6) (2011) 45-51. CNKI:SUN:GCLX.0.2011-06-009, (in Chinese).
  36. S. Zhang, Z. Huang, L. Guo, Hysteretic performance of dovetail profiled steel-concrete composite sandwich shear walls, Eng. Struct. 256 (2022) 113994, https://doi.org/10.1016/j.engstruct.2022.113994.
  37. Y. Xing, W. Wang, Y. Ou, X. Jiang, H. Al-azzani, Seismic behavior of steel truss and concrete composite shear wall with double X-shaped braces, J. Build. Eng. 62 (2022) 105399, https://doi.org/10.1016/j.jobe.2022.105399.
  38. C.S. Sumesh, A. Ramesh, Numerical modelling and optimization of dry orthogonal turning of Al6061 T6 alloy, Period. Polytech. - Mech. Eng. 62 (3) (2018) 196-202, https://doi.org/10.3311/PPme.11347.