Nuclear Engineering and Technology

  • 제56권5호
  • /
  • Pages.1747-1753
  • /
  • 2024
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

A comparison study between the realistic random modeling and simplified porous medium for gamma-gamma well-logging

  • Fatemeh S. Rasouli (Department of Physics, K.N. Toosi University of Technology)
  • 투고 : 2023.03.12
  • 심사 : 2023.12.12
  • 발행 : 2024.05.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The accurate determination of formation density and the physical properties of rocks is the most critical logging tasks which can be obtained using gamma-ray transport and detection tools. Though the simulation works published so far have considerably improved the knowledge of the parameters that govern the responses of the detectors in these tools, recent studies have found considerable differences between the results of using a conventional model of a homogeneous mixture of formation and fluid and an inhomogeneous fractured medium. It has increased concerns about the importance of the complexity of the model used for the medium in simulation works. In the present study, we have suggested two various models for the flow of the fluid in porous media and fractured rock to be used for logging purposes. For a typical gamma-gamma logging tool containing a 137Cs source and two NaI detectors, simulated by using the MCNPX code, a simplified porous (SP) model in which the formation is filled with elongated rectangular cubes loaded with either mineral material or oil was investigated. In this model, the oil directly reaches the top of the medium and the connection between the pores is not guaranteed. In the other model, the medium is a large 3-D matrix of 1 cm3 randomly filled cubes. The designed algorithm to fill the matrix sites is so that this realistic random (RR) model provides the continuum growth of oil flow in various disordered directions and, therefore, fulfills the concerns about modeling the rock textures consist of extremely complex pore structures. For an arbitrary set of oil concentrations and various formation materials, the response of the detectors in the logging tool has been considered as a criterion to assess the effect of modeling for the distribution of pores in the formation on simulation studies. The results show that defining a RR model for describing heterogeneities of a porous medium does not effectively improve the prediction of the responses of logging tools. Taking into account the computational cost of the particle transport in the complex geometries in the Monte Carlo method, the SP model can be satisfactory for gamma-gamma logging purposes.

키워드

참고문헌

  1. W.R. Mills, D.C. Stromswold, L.S. Allen, Advances in nuclear oil well logging, Nucl. Geophys. (Int. J. Rad. Appl. Instrum. E) (United Kingdom) 5 (3) (1991).
  2. D.V. Ellis, J.M. Singer, Well Logging for Earth Scientists, Vol. 692, Springer, Dordrecht, 2007.
  3. W. Bertozzi, D.V. Ellis, J.S. Wahl, The physical foundation of formation lithology logging with gamma rays, Geophysics 46 (10) (1981) 1439-1455. https://doi.org/10.1190/1.1441151
  4. C.M. Davisson, R.D. Evans, Gamma-ray absorption coefficients, Rev. Modern Phys. 24 (2) (1952) 79.
  5. W. Wu, B. Chen, G. Yu, M. Li, X. Li, Responses and data inversion of four-detector scattered-gamma-ray logging in cased holes, J. Pet. Sci. Eng. 159 (2017) 691-701. https://doi.org/10.1016/j.petrol.2017.10.001
  6. W.S. Wu, L.J. Huang, Monte Carlo simulating of three detector density logging, Chinese J. Geophys. 47 (1) (2004) 181-187. https://doi.org/10.1002/cjg2.470
  7. H. Wu, F. Zhang, H. Guo, Y. Xin, Z. Han, Impact of focused gamma ray beam angle on the response of density logging tool, Appl. Radiat. Isot. 123 (2017) 102-108. https://doi.org/10.1016/j.apradiso.2017.02.043
  8. Y. Ge, J. Liang, Q. Zhang, W. Tang, A. Munoz-Garcia, A comparison study of GEANT4 and MCNP6 on neutron-induced gamma simulation, Appl. Radiat. Isot. 190 (2022) 110514.
  9. W.A. Metwally, Porosity calculations using a C/O logging tool with boron-lined NaI detectors, Appl. Radiat. Isot. 69 (1) (2011) 217-219. https://doi.org/10.1016/j.apradiso.2010.08.003
  10. J. Liu, H. Wu, F. Zhang, S. Liu, Z. Liu, H. Yan, Improvement in the method for borehole caliper measurement based on azimuthal gamma-gamma density well logging, Appl. Radiat. Isot. 145 (2019) 68-72. https://doi.org/10.1016/j.apradiso.2018.12.014
  11. J.G. Szucs, L. Balazs, Sensitivity study of C/O logging measurements by Monte Carlo method, Appl. Radiat. Isot. 188 (2022) 110400.
  12. M.I. Pinilla, A. Hellinger, L.K. Vo, W.L. Dunn, W. McNeil, A. Bahadori, Design studies using MCNP6® for an oil well logging prototype tool and a test facility, Radiat. Phys. Chem. 167 (2020) 108393.
  13. F.S. Rasouli, S.F. Masoudi, Effect of modeling porous media on the response of gamma-gamma well-logging tool, Sci. Rep. 10 (1) (2020) 6823.
  14. F.S. Rasouli, Does mudcake change the results of modeling gamma-gamma well-logging? Nucl. Eng. Technol. 54 (9) (2022) 3390-3397. https://doi.org/10.1016/j.net.2022.03.028
  15. D.B. Pelowitz, MCNPX User's Manual, Vol. 5, Los Alamos National Laboratory, Los Alamos, 2005, p. 369.
  16. R. Desbrandes, Encyclopedia of Well Logging, Editions OPHRYS, 1985.
  17. M. Sahimi, Flow and Transport in Porous Media and Fractured Rock: From Classical Methods to Modern Approaches, John Wiley & Sons, 2011.