과제정보
We are pleased to acknowledge support from the National Research Foundation of Korea (NRF) funded by the Korea government (MSIP) (Grant No. 2021R1A2C3010731). Also, this work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2021R1F1A1052123).
참고문헌
- S. Kwag, S. Eem, J. Kwak, H. Lee, J. Oh, G.H. Koo, et al., Shaking table test and numerical analysis of nuclear piping under low- and high-frequency earthquake motions, Nucl. Eng. Technol. 54 (2022) 3361-3379.
- S.W. Kim, B.G. Jeon, D.G. Hahm, M.K. Kim, Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain, Nucl. Eng. Technol. 51 (2019) 561-572.
- S.H. Lee, S.M. Ryu, W.B. Jeong, Vibration analysis of compressor piping system with fluid pulsation, J. Mech. Sci. Technol. 26 (2012) 3903-3909.
- S.G. Luca, F. Chira, V.O. Rosca, Passive, active and semi-active control systems in civil engineering, Bulletin of the Polytechnic institute of Jassy, Constructil Arhitectura Section 3-4 (2005) 23-31.
- J.P. Den Hartog, Mechanical Vibration, fourth ed., McGraw-Hill, New York, 1956.
- H.C. Tsai, G.C. Lin, Optimum tuned-mass dampers for minimizing steady-state response of support-excited and damped systems, Earthq. Eng. Struct. Dynam. 22 (1993) 957-973.
- G.B. Song, P. Zhang, L.Y. Li, M. Singla, D. Patil, H.N. Li, et al., Vibration control of a pipeline structure using pounding tuned mass damper, J. Eng. Mech. 142 (2016).
- S. Kwag, S. Eem, J. Kwak, H. Lee, J. Oh, G.H. Koo, Mitigation of seismic responses of actual nuclear piping by a newly developed tuned Mass Damper Device, Nucl. Eng. Technol. 53 (2021) 2728-2745.
- C.C. Chang, T.Y. Yang, Henry. Control of buildings using active tuned mass dampers, J. Eng. Mech. 121 (1995) 355-356.
- A. Yanik, U. Aldemir, M. Bakioglu, A new active control performance index for vibration control of three-dimensional structures, Eng. Struct. 62 (2014) 53-64.
- M.L. Brodersen, A.S. Bjorke, J. Hogsberg, Active tuned mass damper for damping of offshore wind turbine vibrations, Wind Energy 20 (2016) 783-796.
- T. Kobori, M. Takahashi, T. Nasu, N. Niwa, K. Ogasawara, Seismic response controlled structure with active variable stiffness system, Earthq. Eng. Struct. Dynam. 22 (1993) 925-941.
- Z. Akbay, H.M. Aktan, Abating earthquake effects on buildings by active slip brace devices, Shock Vib. 2 (1995) 133-142.
- M.Q. Feng, M. Shinozuka, S. Fuji, M. Shinozuka, M. Shinozuka, Experimental and Analytical Study of a Hybrid Isolation System Using Friction Controllable Sliding Bearings, National Center for Earthquake Engineering Research, Buffalo, NY, 1992.
- M.Q. Feng, M. Shinozuka, S. Fujii, Friction-controllable sliding isolation system, J. Eng. Mech. 119 (1993) 1845-1864.
- A. Preumont, B. de Marneffe, A. Deraemaeker, F. Bossens, The damping of a truss structure with a piezoelectric transducer, Comput. Struct. 86 (2008) 227-239.
- C.W. Stammers, T. Sireteanu, Vibration control of machines by use of semi-active dry friction damping, J. Sound Vib. 209 (1998) 671-684, https://doi.org/10.1006/jsvi.1997.1289.
- A.V. Bhaskararao, R.S. Jangid, Harmonic response of adjacent structures connected with a friction damper, J. Sound Vib. 292 (2006) 710-725, https://doi.org/10.1016/j.jsv.2005.08.029.
- H. Kobayashi, M. Yoshida, Y. Ochi, Dynamic response of piping system on rack structure with gaps and frictions, Nucl. Eng. Des. 111 (1989) 341-350.
- K. Suzuki, T. Watanabe, T. Mitsumori, N. Shimizu, H. Kobayashi, N. Ogawa, Experimental study on seismic responses of piping systems with friction-part 1: large-scale shaking table vibration test, J. Pressure Vessel Technol. 117 (1995) 245-249.
- H. Kobayashi, R. Yokoi, T. Chiba, K. Suzuki, N. Shimizu, C. Minowa, Experimental study on seismic responses of piping systems with friction-part 2: simplified analysis method on the effect of friction, J. Pressure Vessel Technol. 117 (1995) 250-255.
- S.V. Bakre, R.S. Jangid, G.R. Reddy, Seismic response of piping system with isolation devices, in: 13th World Conf. Earthquake Engineering, Vancover, Canada, August 1-6, 2004.
- S.V. Bakre, R.S. Jangid, G.R. Reddy, Response of piping system on friction support to bi-directional excitation, Nucl. Eng. Des. 237 (2007) 124-136.
- A. Sone, K. Tsuchikawa, T. Yamauchi, A. Masuda, Seismic response analysis of multiple supported piping system considering friction characteristics of support, in: Pressure Vessels and Piping Conference, Baltimore, Maryland, USA, July 17-21, 2011.
- Shankarachar Sutal, Radhakrishna Madabhushi, P. Babu, Finite element analysis of piping vibration with guided supports, International Journal of Mechanical Engineering and Automation 3 (2016) 96-106.
- Tatiana B. Mironova, Andrey B. Prokofiev, Victor Y. Sverbilov, The finite element technique for modelling of pipe system vibroacoustical characteristics, Procedia Eng. 176 (2017) 681-688, https://doi.org/10.1016/j.proeng.2017.02.313. ISSN 1877-7058.
- N.S.V.K. Rao, P.K. Singh, Finite element analysis of flow induced vibrations of pipes on elastic foundations, in: S.N. Atluri, G. Yagawa (Eds.), Computational Mechanics '88, Springer, Berlin, Heidelberg, 1988, https://doi.org/10.1007/978-3-642-61381-4_215.
- F. Albertson, J. Gilbert, Harmonic balance method used for calculating the steady state oscillations of a simple one-cylinder cold engine, J. Sound Vib. 241 (4) (2001) 541-565, https://doi.org/10.1006/jsvi.2000.3315. ISSN 0022-460X.
- Minvydas Ragulskis, A. Fedaravicius, K. Ragulskis, Harmonic balance method for FEM analysis of fluid flow in a vibrating pipe, Commun. Numer. Methods Eng. 22 (2005) 347-356, https://doi.org/10.1002/cnm.816.
- M. Ragulskis, A. Fedaravicius, K. Ragulskis, Harmonic balance method for FEM analysis of fluid flow in a vibrating pipe, Commun. Numer. Methods Eng. 22 (2006) 347-356, https://doi.org/10.1002/cnm.816.
- N. Shimuzu, K. Suzuki, T. Watanabe, N. Ogawa, H. Kobayashi, Large scale shaking table test on modal responses of 3D piping system with friction support, in: Pressure Vessels and Piping Conference, Montreal, Canada, July 21-26, 1996.
- G.R. Reddy, K. Suzuki, T. Watanabe, S.C. Mahajan, Linearization techniques for seismic analysis of piping system on friction support, J. Press. Vessel Tchnol. 121 (1999) 103-108.
- S. Baek, B. Epureanu, Reduced-order modeling of bladed disks with friction ring dampers, ASME. J. Vib. Acoust 139 (6) (August 2, 2017), 061011. December 2017.
- Robert L. Weber, Marsh W. White, Kenneth V. Manning, College Physics, McGraw-Hill Book Company, Inc., New York, 1952, p. 820.
- Y.H. Jang, J.R. Barber, Effect of phase on the frictional dissipation in systems subjected to harmonically varying loads, Eur. J. Mech. Solid. 30 (3) (2011) 269-274.
- M. Paggi, R. Pohrt, V. Popov, Partial-slip frictional response of rough surfaces, Sci. Rep. 4 (2014) 5178.