Earthquakes and Structures

  • 제27권1호
  • /
  • Pages.69-82
  • /
  • 2024
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance enhancement of a PCI-girder bridge pier with shear panel damper plus gap: Numerical simulation

  • Andika M. Emilidardi (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada) ;
  • Ali Awaludin (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada) ;
  • Andreas Triwiyono (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada) ;
  • Angga F. Setiawan (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada) ;
  • Iman Satyarno (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada) ;
  • Alvin K. Santoso (Department of Civil and Envinromental Engineering, Universitas Gadjah Mada)
  • 투고 : 2023.08.23
  • 심사 : 2024.05.03
  • 발행 : 2024.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the conventional seismic design approach for a bridge pier, the function of the stopper, and shear key are to serve as mechanisms for unseating prevention devices that retain and transmit the lateral load to the pier under strong earthquakes. This frequently inflicts immense shear forces and bending moments concentrated at the plastic hinge zone. In this study, a shear panel damper plus gap (SPDG) is proposed as a low-cost alternative with high energy dissipation capacity to improve the seismic performance of the pier. Therefore, this study aimed to investigate the seismic performance of the pre-stressed concrete I girder (PCI-girder) bridge equipped with SPDG. The bridge structure was analyzed using nonlinear time history analysis with seven-scaled ground motion records using the guidelines of ASCE 7-10 standard. Consequently, the implementation of SPDG technology on the bridge system yielded a notable decrease in maximum displacement by 41.49% and a reduction in earthquake input energy by 51.05% in comparison to the traditional system. This indicates that the presence of SPDG was able to enhance the seismic performance of the existing conventional bridge structure, enabling an improvement from a collapse prevention (CP) level to an immediate occupancy (IO).

키워드

과제정보

The authors are grateful to the Department of Civil and Environmental Engineering at Universitas Gadjah Mada and PT. Raya Consult for the data support, as well as the authors' contribution to this study such as Andika Monanta Emilidardi: data analysis, writing, and editing; Ali Awaludin: conceptualization, review, and editing; Andreas Triwiyono: review; Angga Fajar Setiawan: conceptualization, review, and editing; Iman Satyarno: review.

참고문헌

  1. AASHTO (2011), Guide Specifications for LRFD Seismic Bridge Design, 2nd Edition, American Association of Highway and Transportation Officials, Washington, D.C., USA.
  2. AASHTO (2017), LFRD Bridge Design Specifications. Bridge Engineering Handbook: Fundamentals, 2nd Edition, American Association of Highway and Transportation Officials, Washington, D.C., USA.
  3. Abdel Raheem, S.E. (2009), "Pounding mitigation and unseating prevention at expansion joints of isolated multi-span bridges", Eng. Struct., 31(10), 2345-2356. https://doi.org/10.1016/j.engstruct.2009.05.010.
  4. ASCE (2000), FEMA 356 Prestandard and Commentary for the Seismic Rehabilitation of Building, Federal Emergency Management Agency, Washington, D.C., USA.
  5. ASCE (2017), Seismic Evaluation and Retrofit of Existing Buildings, Structural Engineering Institute of the American Society of Civil Engineering, Reston, VA, USA.
  6. ASCE/SEI 7-10 (2013), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Structural Engineering Institute of the American Society of Civil Engineering, Reston, VA, USA.
  7. Becker, T.C. and Mahin, S.A. (2012), "Experimental and analytical study of the bi-directional behavior of the triple friction pendulum isolator", Earthq. Eng. Struct. Dyn., 41(3), 355-373. https://doi.org/10.1002/eqe.1133.
  8. Bhavani, B.D., Sandhya, K.J. and Manoj, M. (2018), "Analysis of pre-stressed flyover elements", Int. J. Innov. Res. Sci. Eng. Technol., 7(3), 2917-2923. https://doi.org/10.15680/IJIRSET.2018.0703152.
  9. Bi, K. and Hao, H. (2015), "Modelling of shear keys in bridge structures under seismic loads", Soil Dyn. Earthq. Eng., 74, 56-68. https://doi.org/10.1016/j.soildyn.2015.03.013.
  10. Bowles, J.E. (1974), Analytical and Computer Methods in Foundation Engineering, McGraw-Hill, New York, NY, USA.
  11. BSNI (2016), Perencanaan Jembatan Terhadap Beban Gempa SNI 2833, Badan Standardisasi Nasional Indonesia, Jakarta, Indonesia.
  12. Bukkems, J.M.W. (2017), "Bending-shear interaction of circular hollow sections assessment of the cross-sectional design rules by means of analytical, numerical and statistical evaluation", Master Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands.
  13. Cao, L.Y. and Li, C.X. (2022), "A high performance hybrid passive base-isolated system", Struct. Control Health Monit., 29(3), e2887. https://doi.org/10.1002/stc.2887.
  14. Chaofeng, Z., Youchun, W., Longfei, W. and Meiping, W. (2017), "Hysteretic mechanical property of low-yield strength shear panel dampers in ultra-large plastic strain", Eng. Struct., 148, 11-22. https://doi.org/10.1016/j.engstruct.2017.06.028.
  15. Chen, X., De Domenico, D. and LI, C. (2023), "Seismic resilient design of rocking tall bridge piers using inerter-based systems", Eng. Struct., 281, 115819. https://doi.org/10.1016/j.engstruct.2023.115819.
  16. Chen, Z., Ge, H. and Usami, T. (2006), "Hysteretic model of stiffened shear panel dampers", J. Struct. Eng., 132(3), 478-483. https://doi.org/10.1061/(asce)0733-9445(2006)132:3(478).
  17. Chen, Z., Ge, H. and Usami, T. (2007), "Study on seismic performance upgrading for steel bridge structures by introducing energy-dissipation members", J. Struct. Eng., 53, 540-549. https://doi.org/10.11532/structcivil.53A.540.
  18. Darmawan, M.F. (2021), "Pile-supported slab viaduct structure braced with shear panel damper", Master Thesis, Universitas Gadjah Mada, Yogyakarta, Indonesia.
  19. Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak, H. and Buyukozturk, O. (2014), "Development of earthquake energy demand spectra", Earthq. Spectra, 31(3), 1667-1689. https://doi.org/10.1193/011212EQS010M.
  20. Filippou, F. and Mazzoni, S. (2012), Steel01 Material, OpenSees, Pacific Earthquake Engineering Research Center, Berkeley, CA, USA. https://opensees.berkeley.edu/wiki/index.php/Steel01_Material
  21. Guo, W., Hu, Y., Liu, H. and Bu, D. (2019), "Seismic performance evaluation of typical piers of China's high-speed railway bridge line using pushover analysis", Math. Probl. Eng., 2019(1), 9514769. https://doi.org/10.1155/2019/9514769.
  22. Han, Q., Sakata, H., Maida, Y., Mori, T., Maegawa, T. and Zhang, Y. (2019), "Performance evaluation of RC frame with RC wall piers equipped with unbonded steel rod dampers subjected to in-plane loading", Eng. Struct., 197, 109403. https://doi.org/10.1016/j.engstruct.2019.109403.
  23. Han, Q., Zhou, Y., Ou, Y. and Du, X. (2017), "Seismic behavior of reinforced concrete sacrificial exterior shear keys of highway bridges", Eng. Struct., 139, 59-70. https://doi.org/10.1016/j.engstruct.2017.02.034.
  24. Haroki, Y., Awaludin, A., Priyosulistyo, H., Setiawan, A.F. and Satyarno, I. (2023), "Seismic performance comparison of simply supported hollow slab on pile group structure with different operational category and shear panel damper application", Civil Eng. Dimens., 25(1), 10-19. https://doi.org/10.9744/ced.25.1.10-19.
  25. Hube, M.A. and Rubilar, F. (2012), "Capacity evaluation of steel stoppers of reinforced concrete Chilean bridges", International Symposium for CISMID 25th Anniversary, Lima, Peru, August.
  26. Jankowski, R., Wilde, K. and Fujino, Y. (2000), "Reduction of pounding effects in elevated bridges during earthquakes", Earthq. Eng. Struct. Dyn., 29, 195-212. https://doi.org/10.1002/(SICI)1096-9845(200002)29:2%3C195::AID-EQE897%3E3.0.CO;2-3.
  27. Jiang, H., Li, S. and He, L. (2019), "Experimental study on a new damper using combinations of viscoelastic material and low-yield-point steel plates", Front. Mater., 6, 1-12. https://doi.org/10.3389/fmats.2019.00100.
  28. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div., 97(7), 1969-1990. https://doi.org/10.1061/JSDEAG.0002957.
  29. Li, C.X., Pan, H. and Cao, L.Y. (2024), "Pendulum-type tuned tandem mass dampers-inerters for crosswind response control of super-tall buildings", J. Wind Eng. Indust. Aerodyn., 247, 105706. https://doi.org/10.1016/j.jweia.2024.105706.
  30. Megally, S. (2001), "Seismic response of sacrificial shear keys in bridge abutments", SSRP-2001/23; University of California, San Diego, La Jolla, CA, USA.
  31. Moehle, J.P. and Eberhard, M.O. (2000), Bridge Engineering Handbook: Earthquake Damage to Bridges, CRC Press, Boca Raton, FL, USA.
  32. Mohle, J. and Kunnath, S. (2012), Reinforcing Steel Material, OpenSees, Pacific Earthquake Engineering Research Center, Berkeley, CA, USA. https://opensees.berkeley.edu/wiki/index.php/Reinforcing_Steel_Material
  33. Mosalam, K.M., Zareian, F., Taciroglu, E., Omrani, R., Mobasher, B., Liang, X. and Gunay, S. (2015), "Guidelines for nonlinear seismic analysis of ordinary bridges: Version 2.0", CA15-2266, California Department of Transportation, Sacramento, CA, USA.
  34. NCHRP (2013), Performance-Based Seismic Bridge Design: A Synthesis of Highway Practice, Transportation Research Board, Washington, D.C., USA.
  35. Ren, X., Qiang, Z., Dazhu, H. and Dengshan, B. (2021), "Seismic performance study on critically damaged masonry piers retrofitted using shear-compressive metal dampers", Struct., 34, 3906-3914. https://doi.org/10.1016/j.istruc.2021.10.022.
  36. Sabouri-Ghomi, S., Ventura, C.E. and Kharrazi, M.H. (2005), "Shear analysis and design of ductile steel plate walls", J. Struct. Eng., 131(6), 878-889. https://doi.org/10.1061/(asce)0733-9445(2005)131:6(878).
  37. Santoso, A.K, Sulistyo, D., Awaludin, A., Fajar Setiawan, A., Satyarno, I., Purnomo, S. and Harry, I. (2022), "Structural systems comparison of simply supported PSC box girder bridge equipped with elastomeric rubber bearing and lead rubber bearing", Civil Eng. Dimens., 24(1), 19-30. https://doi.org/10.9744/ced.24.1.19-30.
  38. Santoso, A.K., Sulistyo, D., Awaludin, A., Setiawan, A.F., Satyarno, I., Purnomo, S. and Harry, I. (2023), "Comparative study of the seismic performance between simply supported PSC box girder bridge equipped with shear panel damper (SPD) and lead rubber bearing (LRB)", Int. J. Technol., 2024, 1.
  39. Setiawan, A.F. and Takahashi, Y. (2018), "A high seismic performance concept of integrated bridge pier with triple RC columns accompanied by friction damper plus gap", J. Japan Soc. Civil Eng. Ser. A1 (Struct. Eng. Earthq. Eng. (SE/EE)), 74(4), I_131-I_147. https://doi.org/10.2208/jscejseee.74.i_131.
  40. Setiawan, A.F., Darmawan M.F., Yogatama B.A., Satyarno I. and Guntara M. (2022), "Seismic performance investigation of bracing and SPD application in PHC pile as viaduct piers", The 17th World Conference on Earthquake Engineering, Sendai, Japan, September.
  41. Shen, Y., Li, J., Freddi, F., Igarashi, A. and Zhou, J. (2022), "Numerical investigation of transverse steel damper (TSD) seismic system for suspension bridges considering pounding between girder and towers", Soil Dyn. Earthq. Eng., 155, 107203. https://doi.org/10.1016/j.soildyn.2022.107203.
  42. Shi, G., Gao, Y., Wang, X. and Zhang, Y. (2018), "Mechanical properties and constitutive models of low yield point steels", Constr. Build. Mater., 175, 570-587. https://doi.org/10.1016/j.conbuildmat.2018.04.219.
  43. Shoaei, P., Tahmasebi Orimi, H. and Zahrai, S.M. (2018), "Seismic reliability-based design of inelastic base-isolated structures with lead-rubber bearing systems, Soil Dyn. Earthq. Eng., 115, 589-605. https://doi.org/10.1016/j.soildyn.2018.09.033.
  44. Suarjana, M., Octora, D.D. and Riyansyah, M. (2020), "Seismic performance of RC hollow rectangular bridge piers retrofitted by concrete jacketing considering the initial load and interface slip", J. Eng. Technol. Sci., 52(3), 343-369. https://doi.org/10.5614/j.eng.technol.sci.2020.52.3.4.
  45. Sunardi, B. (2015), "Percepatan tanah sintetis kota Yogyakarta berdasarkan deagregasi Bahaya gempa", J. Environ. Geol. Hazard., 6(3), 211-228. http://doi.org/10.34126/jlbg.v6i3.85.
  46. Wu, C., Zhang, Q., Huang, W., Zhang, S. and Xu, X. (2022), "Cyclic behavior of metallic damper connected reinforced concrete beam-column joint with an opening in slab", J. Build. Eng., 60, 105193. https://doi.org/10.1016/j.jobe.2022.105193.
  47. Xiang, N., Alam, M.S. and Li, J. (2019), "Yielding steel dampers as restraining devices to control seismic sliding of laminated rubber bearings for highway bridges: Analytical and experimental study", J. Bridge Eng., 24(11), 04019103. https://doi.org/10.1061/(ASCE)be.1943-5592.0001487.
  48. Xiang, N., Goto, Y., Alam, M. and Li, J. (2021), "Effect of bonding or unbonding on seismic behavior of bridge elastomeric bearings: Lessons learned from past earthquakes in China and Japan and inspirations for future design", Adv. Bridge Eng., 2(1), 1-17. https://doi.org/10.1186/s43251-021-00036-9.
  49. Yao, Z., Wang, W. and Zhu, Y. (2021), "Experimental evaluation and numerical simulation of low-yield-point steel shear panel dampers", Eng. Struct., 245, 1-17. https://doi.org/10.1016/j.engstruct.2021.112860.
  50. Yenidogan, C. (2021), "Earthquake-resilient design of seismically isolated buildings: a review of technology", Vib., 4, 602-647. https://doi.org/10.3390/vibration4030035.
  51. Yuan, W., Guo, A. and Li, H. (2017), "Seismic failure mode of coastal bridge piers considering the effects of corrosion-induced damage", Soil Dyn. Earthq. Eng., 93, 135-146. https://doi.org/10.1016/j.soildyn.2016.12.002.
  52. Zhang, C., Aoki, T., Zhang, Q. and Wu, M. (2015), "The performance of low-yield-strength steel shear-panel damper with without buckling", Mater. Struct. Mater. Constr., 48(4), 1233-1242. https://doi.org/10.1617/s11527-013-0228-9.
  53. Zhang, C., Ding, C., Zhou, Y., Wang, G., Shi, F. and Huang, W. (2023), "Seismic behavior of prefabricated reinforced concrete stair isolated by high damping rubber bearings", Bull. Earthq. Eng., 21(2), 1325-1352. https://doi.org/10.1007/s10518-022-01548-z.
  54. Zhang, C., Zhang, Z. and Zhang, Q. (2012), "Static and dynamic cyclic performance of a low-yield-strength steel shear panel damper", J. Constr. Steel Res., 79, 195-203. https://doi.org/10.1016/j.jcsr.2012.07.030.