References
- Ahmed, S.S. and Hawlader, B.C. (2015). Numerical analysis of inclined uplift capacity of suction caisson in sand. Int. J. Offshore Polar Eng., 25, 145-155. https://doi.org/10.17736/ijope.2015.cg11
- Ahn, J., Lee, H. and Kim, Y.-T. (2015). Finite element analysis of the holding capacity of shallow suction caisson anchors. Mar. Georesources Geotechnol., 33, 33-44. https://doi.org/10.1080/1064119X.2013.778377
- Cheng, L., Hossain, M.S., Hu, Y., Kim, Y.H. and Ullah, S.N. (2021). Failure envelope of suction caisson anchors subjected to combined loadings in sand. Appl. Ocean Res., 114, 102801.
- Colliat, J.L., Boisard, P., Sparrevik, P. and Granet, J.C. (1998). Design and installation of suction anchor piles at soft clay site. Waterway, Port, Coastal and Ocean Eng., 124, 179-188. https://doi.org/10.1061/(ASCE)0733-950X(1998)124:4(179)
- DNV (2021). Geotechnical design and installation of suction anchors in clay. DNVGL Recommended Practice RP-E303.
- Fu, D., Zhang, Y., Yan, Y. and Jostad, H.P. (2020). Effects of tension gap on the holding capacity of suction anchors. Mar. Struct., 69, 102679.
- Saviano, A. and Pisano, F. (2017). Effects of misalignment on the undrained HV capacity of suction anchors in clay. Ocean Eng., 133, 89-106. https://doi.org/10.1016/j.oceaneng.2017.01.033
- Sparrevik, P. (2002). Suction pile technology and installation in deep waters. Offshore Technology Conf. 14241, 1-9.
- Sparrevik, P., Saue, M., Shin, Y. and Langford, T. (2017). Suction anchor design, installation and monitoring (Part 1), Geotechnical Engineering, 33(5), 25-33.
- Suroor, H. and Hossain, J. (2015). Effect of torsion on suction piles for subsea and mooring applications. Proceedings of the 3rd International Symposium on Frontiers in Offshore Geotechnics. ISFOG III, Oslo. 325.
- Zhang, M.-H., Yin, Z.-Y. and Fu, Y. (2023). Numerical investigation on the pull-out capacity of suction anchors in sand considering torsional and mooring line effects. Computers and Geotechnics, 160, 105524.