The Journal of The Korea Institute of Intelligent Transport Systems (한국ITS학회 논문지)

The Korea Institute of Intelligent Transport Systems (한국ITS학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Capacity Review of One-lane Hi-pass Lanes on Highways : Focusing on Using Bootstrapping Techniques

고속도로 단차로 하이패스차로 용량 검토에 관한 연구 : 부트스트랩 기법 활용 중심으로

  • Bosung Kim (Transportation Engineering ,Hanyang University) ;
  • Donghee Han (Korea Expressway Corporation Research Institute)
  • 김보성 (한양대학교 교통공학과 ) ;
  • 한동희 (한국도로공사 도로교통연구원 교통연구실)
  • Received : 2024.05.13
  • Accepted : 2024.06.12
  • Published : 2024.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In the present highway design guidelines suggest that the capacity of one-lane hi-pass lanes is 2,000 veh/h for mainline toll plaza and 1,700 veh/h for interchange toll plaza. However, in a study conducted in early 2010, capacity of the mainline toll plaza was presented with 1,476 veh/h/ln to 1,665 veh/h/ln, and capacity of the interchange toll plaza was presented as 1,443 veh/h/ln. Accordingly, this study examined the feasibility of the capacity of the currently proposed highway one-lane hi-pass lane. Based on the 2021 individual vehicle passing data collected from the one-lane hi-pass gantry, the speed-traffic volume relationship graph and headway were used to calculate and compare capacity. In addition, the bootstrapping technique was introduced to utilize the headway and new processing methods for collected data were reviewed. As a result of the analysis, the one-lane hi-pass capacity could be estimated at 1,700 veh/h/ln for the interchange toll plaza, and at least 1,700 veh/h/ln for the mainline toll plaza. In addition, by using the bootstrap technique when using headway data, it was possible to present an estimated capacity similar to the observed capacity.

현재 고속도로 설계지침에서는 단차로 하이패스차로의 용량을 본선형 영업소는 2,000대/시, 나들목 영업소는 1,700대/시로 제시하고 있다. 그리나 2010년도 초반에 수행되었던 연구에서는 본선형 영업소는 1,476대/시/차로~1,665대/시/차로, 나들목 영업소는 1,443대/시/차로 정도로 제시하였다. 이에 본 연구는 현재 제시되고 있는 고속도로 단차로 하이패스차로의 용량의 타당성을 검토하였다. 단차로 하이패스 갠트리에서 수집되는 2021년도 개별차량 통과 자료를 기반으로 속도-교통량 관계 그래프와 차두시간을 활용하여 용량을 산정하고 비교하였다. 또한 차 두시간 활용에 있어 부트스트랩 기법을 도입하여 수집데이터의 새로운 가공 방안에 대해 검토하였다. 분석 결과 단차로 하이패스 용량은 나들목 영업소는 1,700대/시/차로로 제시할 수 있었으며, 본선형 영업소는 적어도 1,700대/시/차로 이상으로 추정할 수 있었다. 또한 차두시간 자료 이용 시 부트스트랩 기법을 활용하면 관측용량과 유사한 추정용량을 제시할 수 있었다.

Keywords

References

  1. Bae, Y. S.(2011), Development of Optimal Toll Plaza Design and Operation Standards based on ETCS Utilization, Ajou University.
  2. Choi, J. S. and Lee, S. J.(2000), "Traffic flow analysis for the weaving section design on urban freeways (I)," Journal of Korean Society of Transportation, vol. 18, no. 5, pp.33-42.
  3. Choi, K. C., Lee, J. W. and Park. S. W.(2012), "A simple methodology for estimating the capacity of multi-lane smart tolling," Korea Society of Civil Engineers, Journal of Civil Engineering, vol. 32, no. 4D, pp.305-311. https://doi.org/10.12652/Ksce.2012.32.4D.305
  4. Hall, F. L. and Agyemang-Duah, K.(1991), "Freeway capacity drop and the definition of capacity," Transportation Research Record, 1320, pp.91-98.
  5. Hwang, S. H., Kim, J. H., Yoo, C. S., Jung, S. W. and Yoo, D. G.(2009), "A quantative homogeneity analysis of Seoul rainfall using Bootstrap," Journal of Korea Water Resources Association, pp.1157-1161.
  6. Jeon, W. H., Lee, Y. I. and Yang, I. C.(2019), "Development of a time headway distribution model for uninterrupted traffic flow bikeway in Korea," The Journal of The Korea Institute of Intelligent Transport System, vol. 18, no. 5, pp.79-90. https://doi.org/10.12815/kits.2019.18.5.79
  7. Jo, J. H. and Yun, S. R.(2017), "Lasso regression of RNA-Seq data based on bootstrapping for robust feature selection," Journal of Computing Science and Engineering, vol. 23, no. 9, pp.557-563.
  8. Kim, B. S., Kim, H. S. and Seoh, B. H.(2002), "Streamflow generation by bootstrap method and skewness," Journal of Korea Water Resources Association, vol. 35, no. 3, pp.275-283. https://doi.org/10.3741/JKWRA.2002.35.3.275
  9. Kim, J. S. and Park, C. H.(2006), "Freeway design capacity estimation through the analysis of time headway distribution," Journal of the Korean Society of Civil Engineers, vol. 26, no. 2, pp.251-258.
  10. Kim, Y. G. and Jang, M. S.(1995), "The development of capacity estimation methods from statistical distribution of observed traffic flow," Journal of Korean Society of Transportation, vol. 13, no. 1, pp.167-183.
  11. Kim, Y. S. and Lee, S. S.(2015), "Development of new freeway capacity estimation method," International Journal of Highway Engineering, vol. 17, no. 5, pp.123-133. https://doi.org/10.7855/IJHE.2015.17.5.125
  12. Kittelson, W. K. and Roess, R. P.(2001), "Highway capacity analysis after highway capacity manual 2000," Transportation Research Record, 1776, pp.10-16. https://doi.org/10.3141/1776-02
  13. Korea Expressway Corporation(2019), Design guidelines for toll booth considering on-site toll lanes, p.14.
  14. Lee, M. R., Kim, D. G., Kim, H. S. and Lee, C. W.(2013), "Capacity of urban freeway work zones," Journal of the Korean Society of Civil Emginners, vol. 33, no. 3, pp.1123-1130. https://doi.org/10.12652/Ksce.2013.33.3.1123
  15. Ministry Of Construction & Transportation(1999), Study on the improvement of highway capacity manual the final report, Korea Institute of Construction Technology (in Korean).
  16. Ministry of Land, Infrastructure and Transport(2013), Korean highway capacity manual, p.20.
  17. Murat, F. A.(2006), "Simple methodology for evalating toll plaza operations," Transportation Research Record, vol. 1988, no. 1, pp.92-101. https://doi.org/10.1177/0361198106198800112
  18. Pyo, J. K., Son, Y. M., Kim, Y. H., Kim, R. H., Lee, K. H. and Lee, Y. J.(2011), "Use of a bootstrap method for estimating basic wood density for Pinus Densiflora in Korea," Journal of Korean Forest Society, vol. 100, no. 3, pp.392-396.
  19. Yoo, H. M.(2014), A study on capacity estimation criteria of Hi-pass lane based on KHCM, Kyonggi University.