한국압력기기공학회 논문집 (Transactions of the Korean Society of Pressure Vessels and Piping)

한국압력기기공학회 (Korean Society of Pressure Vessels and Piping)
권호 표지
DOI QR코드

DOI QR Code

Type 316L 스테인리스강의 700℃ 열교환기에의 적용 방법론

Application methodology of Type 316L stainless steel to a 700℃ heat exchanger

  • 이형연 (한국원자력연구원) ;
  • 남기언 (한국원자력연구원) ;
  • 이윤승 (경상국립대학교) ;
  • 어재혁 (한국원자력연구원)
  • Hyeong-Yeon Lee ;
  • Ki-Ean Nam ;
  • Yun-Seung Lee ;
  • Jaehyuk Eoh
  • 투고 : 2024.06.02
  • 심사 : 2024.06.13
  • 발행 : 2024.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, high temperature design and integrity evaluation methodology have been developed for Type 316L stainless steel air-to-sodium heat exchanger which uses 700℃ sodium as coolant. Currently the only design rules that take creep effects into consideration explicitly for the 316L stainless steel subjected to high temperature in the creep range are French RCC-MRx, where elevated temperature designs are possible around 550℃. Absent design coefficients at high temperature were determined based on the material properties newly determined in previous studies, and high-temperature design evaluation methodologies were developed based on 3D finite element analyses on the 700℃ class heat exchanger. In addition, works were conducted on the web-based design evaluation program of HITEP_RCC-MRx including incorporation of material properties and design coefficients up to 700℃. Methodologies on high temperature design evaluations on Type 316L stainless steel high-temperature heat exchanger were suggested.

키워드

과제정보

본 연구는 과학기술정보통신부의 재원으로 국가과학기술연구회(CAP-20-03-KAERI)와 한국연구재단(2021R1l1 A2057941, 2021K1A3A1A78097845, 2021M2E2A2081063)의 지원을 받아 수행됨.

참고문헌

  1. Lee, H.Y. and Jeong, J.Y, 2020, "Quantification of conservatism in pressure vessel design subjected to long-term creep conditions as per ASME Section VIII Division 2," Int. J. Press. Ves. Pip., Vol. 180, pp. 1~15. doi:https://doi.org/10.1016/j.ijpvp.2021.104598 
  2. Lee, H.Y., and Eoh, J., 2022, "Securing integrity of high-temperature pressure boundary components in supercritical thermal plants with application of alternative design rules," J. Press. Ves.-T. ASME, Vol. 195, 104598. doi:https://doi.org/10.1016/j.ijpvp.2021.104598 
  3. Lee, H.Y., Kim, H, and Eoh, J., 2023, "Design of type 316L stainless steel 700℃ high-temperature piping," Nucl. Eng. Technol., Vol. 55, pp. 3581-3590. doi:https://doi.org/10.1016/j.net.2023.06.022 
  4. Lee, H.Y., Yoon, J., Lee, J., and Eoh, J., 2022, "High-temperature design of 700℃ heat exchanger in a large capacity high-temperature thermal energy storage performance test facility," ASME 2022 PVP Conference, July 17-22, Las Vegas, USA. doi:https://doi.org/10.1115/PVP2022-84895 
  5. ASME BPVC Section III, Division 5, 2023, High temperature reactors, American Society of Mechanical Engineers, NY. 
  6. RCC-MRx, Section I Subsection B, 2022, Class 1 N1RX Reactor Components, AFCEN, Lyon, France. 
  7. ASME BPVC, Code Case N-898, 2023, Use of Alloy 617 for Class A Elevated Temperature Service Construction Section III, Division 5, American Society of Mechanical Engineers, NY. 
  8. ASME BPVC, Section VIII, Division 1, 2023, Rules for construction of pressure vessels, American Society of Mechanical Engineers, NY. 
  9. ASME BPVC, Section VIII, Division 2, 2023, Alternative Rules, American Society of Mechanical Engineers, NY. 
  10. ASME BPVC Code Case 2843-2, 2019, Analysis of class 2 components in the time-dependent regime - Section VIII Division 2, American Society of Mechanical Engineers, New York. 
  11. Lee, H.Y., Won, M.G., and Huh, N.S., 2019, "HITEP_RCC-MRX program for the support of elevated temperature design evaluation and defect assessment," J. Press. Ves.-T. ASME, Vol. 141, October, 051205, pp. 1-13. doi:https://doi.org/10.1115/1.4043916 
  12. Lee, H.Y., Won, M.G., Son, S.K., and Huh, N.-S., 2017, "Development of a program for high-temperature design evaluation according to RCC-MRx," Nucl. Eng. Des., Vol. 324, pp. 181-195. doi:https://doi.org/10.1016/j.nucengdes.2017.08.034 
  13. Lee, H.Y. and Lee, J., 2022, "Issues and solutions for integrity of pressure vessels and piping subjected to long-term creep exposure in supercritical thermal plants," Mater. High Temp., Vol.39, No.6, pp.436-445. doi:https://doi.org/10.1080/09603409.2022.2041847 
  14. Lee, H.Y. and Jeong, J.Y, 2019, "Issues of non-conservatism in the design of pressure vessels subjected to long-time service at creep regime according to ASME B&PV Code Section VIII," Trans. Korean Soc. Mech. Eng. A, Vol.43 , No.7, pp. 467-473. doi:https://doi.org/10.3795/KSME-A.2019.43.7.467 
  15. ASME B&PV Code, Sec. II, 2023, Materials, Part D Properties, American Society of Mechanical Engineers, NY. 
  16. RCC-MRx, 2022, Section I Subsection Z, Appendix A3, AFCEN, Lyon, France. 
  17. Lee, H.Y., 2016, "Comparison of elevated temperature design codes of ASME Subsection NH and RCC-MRx," Nucl. Eng. Des., Vol. 308, pp.142-153. doi:https://doi.org/10.1016/j.nucengdes.2016.08.024 
  18. Lee, H.Y., Nam, K.E, Eoh, J., 2024, "High-temperature material properties of type 316L stainless steel for the design of pressure boundary components subjected to 700℃ coolant," Nucl. Eng. Technol., online available, https://doi.org/10.1016/j.net.2024.06.033 
  19. ASME B&PV Code, Sec. II, 2023, Materials, Part A Ferrous Material Specifications, American Society of Mechanical Engineers, NY. 
  20. RCC-MRx, 2022, Section II Materials, AFCEN, Lyon, France. 
  21. Lee, H.Y., Nam, K.E, Yoon, J., Kim, H. and Eoh, J., 2024, "Analysis on Applicability of Type 316L Stainless Steel to 700℃ High-Temperature Piping," Trans. Korean Soc. Mech. Eng. A, Vol.48, No.1, pp. 29-35. doi:https://doi.org/10.3795/KSME-A.2024.48.1.029. 
  22. Lee, H.Y., Ha, D.H, Lee, J., and Eoh, J. 2022, "Performance Characteristics of the High-temperature Material Behaviors of Heat Resistant Materials in the Test Facility of Large-scale Thermal Storage Systems," Trans. Korean Soc. Mech. Eng. A, Vol.46 , No.6, pp. 545~551. doi:https://doi.org/10.3795/KSME-A.2022.46.6.545. 
  23. Ha, D.H,, Lee, H.Y., Kim, S.J., Eoh J., 2022, "Proposition of high-temperature fatigue properties for the application of type 316L stainless steel in 700℃ high-temperature design," Trans. Korean Soc. Mech. Eng. A, Vol. 46, No. 12, pp. 1033~1039. doi:https://doi.org/10.3795/KSME-A.2022.46.12.1033 
  24. Ha, D.H,, Kim, S.J., Lee, H.Y., Lee, J., 2022, "Low cycle fatigue behavior and life evaluation of type 316L stainless steel at 700℃," Trans. Korean Soc. Mech. Eng. A, Vol.46 , No.7, pp. 655~662. doi:https://doi.org/10.3795/KSME-A.2022.46.7.655 
  25. Kim, W.G. and Lee, H.Y., 2020, "High-Temperature Mechanical Behaviors of Type 316L Stainless Steel," Trans. of the KPVP, Vol. 16, No. 1, pp.92~99. doi:http://dx.doi.org/10.20466/KPVP.2020.16.1.092 
  26. Lee, H.Y., Nam, K.E, Huh, N.S, Kim, M.K, 2023, "Development of web-based design evaluation platform for elevated temperature design as per ASME Section III Division5, ASME CC-2843 and RCC-MRX," ASME 2023 PVP Conference, July 16-21, Atlanta, USA. doi:https://doi.org/10.1115/PVP2023-106584.