Geomechanics and Engineering

  • 제37권5호
  • /
  • Pages.467-474
  • /
  • 2024
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Application of Ground Penetrating Radar (GPR) coupled with Convolutional Neural Network (CNN) for characterizing underground conditions

  • Dae-Hong Min (Department of Construction and Disaster Prevention Engineering, Daejeon University) ;
  • Hyung-Koo Yoon (Department of Construction and Disaster Prevention Engineering, Daejeon University)
  • 투고 : 2024.03.12
  • 심사 : 2024.05.08
  • 발행 : 2024.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

Monitoring and managing the condition of underground utilities is crucial for ground stability. This study aims to determine whether images obtained using ground penetrating radar (GPR) accurately reflect the characteristics of buried pipelines through image analysis. The investigation focuses on pipelines made from different materials, namely concrete and steel, with concrete pipes tested under various diameters to assess detectability under differing conditions. A total of 400 images are acquired at locations with pipelines, and for comparison, an additional 100 data points are collected from areas without pipelines. The study employs GPR at frequencies of 200 MHz and 600 MHz, and image analysis is performed using machine learning-based convolutional neural network (CNN) techniques. The analysis results demonstrate high classification reliability based on the training data, especially in distinguishing between pipes of the same material but of different diameters. The findings suggest that the integration of GPR and CNN algorithms can offer satisfactory performance in exploring the ground's interior characteristics.

키워드

과제정보

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2020R1A2C2012113).

참고문헌

  1. Araneo, R., Celozzi, S., Maradei, F. and Potini, G. (2005), "Fault detection in conductive pipelines by time domain reflectometry", WSEAS Transactions on Systems, 4(12), 2317-2321. https://doi.org/10.1109/AFRICON.2004.1406701.
  2. Benemaran, R.S. and Esmaeili-Falak, M. (2023), "Predicting the Young's modulus of frozen sand using machine learning approaches: State-of-the-art review", Geomech. Eng., 34(5), 507-527. https://doi.org/10.12989/gae.2023.34.5.507.
  3. Crocco, L., Soldovieri, F., Millington, T. and Cassidy, N.J. (2010), "Bistatic tomographic GPR imaging for incipient pipeline leakage evaluation", Progress In Electromagnetics Research, 101, 307-321. https://doi.org/10.2528/PIER09122206.
  4. Fafara, Z., Lewandowska-Smierzchalska, J. and Matula, R. (2018), "Oil pipeline leak detection using GPR method-simple case study", AGH Drilling, Oil, Gas, 35(1), 165-171. https://doi.org/10.7494/drill.2018.35.1.165.
  5. Fereidooni, D. and Karimi, Z. (2023), "Predicting rock brittleness indices from simple laboratory test results using some machine learning methods", Geomech. Eng., 34(6), 697-726. https://doi.org/10.12989/gae.2023.34.6.697.
  6. Guzman, I.L. and Payano Jr, C. (2023), "Use of repurposed whole textile for enhancement of pavement soils", Int. J. Geo-Eng., 14(1), 12. https://doi.org/10.1186/s40703-023-00190-1.
  7. Hong, W.T., Lee, J.S., Lee, D. and Yoon, H.K. (2022), "Estimation of bulk electrical conductivity in saline medium with contaminated lead solution through TDR coupled with machine learning", Process Saf. Environ. Protect., 161, 58-66. https://doi.org/10.1016/j.psep.2022.03.018.
  8. Iftikhar, C.M.A., Khan, A.S. and Nambori, V. (2023), "The effect of temperature on the mechanical behavior of Berea sandstone under confining pressure: experiments", Int. J. Geo-Eng., 14(1), 18. https://doi.org/10.1186/s40703-023-00191-0.
  9. Jiao, N., Wan, X., Ding, J., Zhang, S. and Liu, J. (2024), "Pipeline deformation caused by double curved shield tunnel in soil-rock composite stratum", Geomech. Eng., 36(2), 131-143. https://doi.org/10.12989/gae.2024.36.2.131.
  10. Kim, S. and Yoon, H.K. (2023), "Application of classification coupled with PCA and SMOTE, for obtaining safety factor of landslide based on HRA", Bull. Eng. Geol. Environ., 82(10), 381. https://doi.org/10.1007/s10064-023-03403-0.
  11. Min, D.H., Jang, B.S. and Yoon, H.K. (2023), "Application of infrared thermography for estimating residual stress in ground anchors for maintenance", Scientific Reports, 13(1), 36. https://doi.org/10.1038/s41598-022-27222-7.
  12. Olabode, O.P. and San, L.H. (2023), "Analysis of soil electrical resistivity and hydraulic conductivity relationship for characterisation of lithology inducing slope instability in residual soil", Int. J. Geo-Eng., 14(1), 7. https://doi.org/10.1186/s40703-023-00184-z.
  13. Oner, C., Bildik, S. and Frost, J.D. (2023), "Numerical investigation of effect of geotextile and pipe stiffness on buried pipe behavior", Geomech. Eng., 34(6), 611-621. https://doi.org/10.12989/gae.2023.34.6.611.
  14. Samadi, H., Hassanpour, J. and Rostami, J. (2023), "Prediction of earth pressure balance for EPB-TBM using machine learning algorithms", Int. J. Geo-Eng., 14(1), 21. https://doi.org/10.1186/s40703-023-00198-7.
  15. Xu, M.Z., Cui, Z.D. and Yuan, L. (2024), "Effect of relative stiffness on seismic response of subway station buried in layered soft soil foundation", Geomech. Eng., 36(2), 167-181. https://doi.org/10.12989/gae.2024.36.2.167.
  16. Zhou, J., Ding, Z., Huang, J., Yang, X. and Ma, M. (2024), "The tunnel model tests of material development in different surrounding rock grades and the force laws in whole excavation-support processes", Geomech. Eng., 36(1), 51-69. https://doi.org/10.12989/gae.2024.36.1.051