DOI QR코드

DOI QR Code

Nonlinear dynamics of SWNT reinforced Aluminium alloy beam

  • Abdellatif Selmi (Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University) ;
  • Samy Antit (Ecole Nationale d'Ingenieurs de Tunis (ENIT), Civil Engineering Laboratory)
  • 투고 : 2021.09.28
  • 심사 : 2023.09.02
  • 발행 : 2024.05.25

초록

The main objective of the present paper is to investigate the nonlinear vibration of buckled beams fixed at both ends and made of Aluminium allay (Al-alloy) reinforced with randomly dispersed Single Walled Carbon Nanotube (SWNT). The Mori-Tanak (M-T) micromechanical approach is selected to predict the homogenized material properties of the beams. The differential equation of motion governing the nonlinear behavior of the Euler-Bernoulli homogeneous beam is solved using an analytical method. The influences of diverse parameters including axial load, vibration amplitude, SWNT volume fraction, SWNT aspect ratio and beam slenderness ratio on the nonlinear frequency are studied.

키워드

과제정보

This study is supported via funding from Prince Sattam bin Abdulaziz University project number (PSAU/2024/R/1445)

참고문헌

  1. Ahmadi, A.A.A., Valipour, P. and Ghasemi, S.E. (2016), "Investigation on vibration of single-walled carbon nanotubes by variational iteration method", Appl. Nanosci., 6, 243-249. https://doi.org/10.1007/s13204-015-0416-8.
  2. Bak, J.H., Kim, Y.D., Hong, S.S., Lee, B.Y., Lee, S.R., Jang, J.H., Kim, M., Char, K., Hong, S. and Park, Y.D. (2008), "High-frequency micromechanical resonators from aluminium-carbon nanotube nanolaminates", Nature Mater., 7, 459-463. https://doi.org/10.1038/nmat2181.
  3. Bakshi, S.R., Lahiri, D. and Agarwal, A. (2010). "Carbon nanotube reinforced metal matrixcomposites - a review", Int. Mater. Rev., 55(1),41-64. https://doi.org/10.1179/095066009X12572530170543.
  4. Belmahi, S., Zidour, M. and Meradjah, M. (2019), "Small-scale effect on the forced vibration of a nano beam embedded an elastic medium using nonlocal elasticity theory", Adv. Aircr. Spacecr. Sci., Int. J., 6(1), 001-018. https://doi.org/10.12989/aas.2019.6.1.001.
  5. Besseghier, A., Heireche, H., Bousahla, A.A., Tounsi, A. and Benzair, A. (2015), "Nonlinear Vibration Properties of a Zigzag Single-Walled Carbon Nanotube Embedded in a Polymer Matrix", Adv. Nano. Res., Int. J., 3(1), 29-37. https://doi.org/doi:10.12989/ANR.2015.3.1.029.
  6. Eatemadi, A., Daraee, H., Karimkhanloo, H., Kouhi, M., Zarghami, N., Akbarzadeh, A., Abasi, M., Hanifehpour, Y. and Joo, S.W. (2014), "Carbon nanotubes: properties, synthesis, purification, and medical applications", Nanoscale Res. Lett., 9, 393. https://doi.org/10.1186/1556-276X-9-393.
  7. Friebel, C., Doghri, I. and Legat, V. (2006), "General mean-field homogenization schemes for viscoelastic composites containing multiple phases of coated inclusions", Int. J. Solids Struct., 43(9), 2513-2541. https://doi.org/10.1016/j.ijsolstr.2005.06.035.
  8. Gao, H., Ji, B., Jager, I. L., Arzt, E. and Fratzl, P. (2003), "Materials become insensitive to flaws at nanoscale: Lessons from nature", Proc. Natl. Acad. Sci. USA, 100(10), 5597-5600. https://doi.org/10.1073/pnas.0631609100. http://dx.doi.org/10.1016/j.physe.2010.01.028. https://doi10.1088/0022-3727/43/42/425401.
  9. Huang, K., Zhang, S., Li, J. and Li, Z. (2019), "Nonlocal nonlinear model of Bernoulli-Euler nanobeam with small initial curvature and its application to single-walled carbon nanotubes", Microsyst. Technol., 25, 4303-4310. https://doi.org/10.1007/s00542-019-04365-8.
  10. Hussain, M., Naeem, M.N., Tounsi, A. and Taj, M. (2019), "Nonlocal effect on the vibration of armchair and zigzag SWCNTs with bending rigidity", Adv. Nano. Res., Int. J., 7(6), 431-442. https://doi.org/10.12989/anr.2019.7.6.431.
  11. Karlicic, D., Kozic, P. and Pavlovic, R. (2015), "Flexural vibration and buckling analysis of single-walled carbon nanotubes using different gradient elasticity theories based on Reddy and Huu-Tai formulations", J. Theor. App. Mech-Pol., 53(1), 217-233. https://doi.org/10.15632/jtam-pl.53.1.217.
  12. Kiani, K. (2014), "In- and out-of- plane dynamic flexural behaviors of two-dimensional ensembles of vertically aligned single-walled carbon nanotubes", Phys. B, 449, 164-180. https://doi.org/10.1016/j.physb.2014.04.044.
  13. Lestari, W. and Hanagud, S. (2001), "Nonlinear vibration ofbuckled beams: some exact solutions", Int. J. Solids Struct., 38(26-27), 4741-4757. https://doi.org/10.1016/S0020-7683(00)00300-0.
  14. Li, L., and Hu, Y. (2016), "Nonlinear bending and free vibration analyses of nonlocal strain gradient beams made of functionally graded materiall", Int. J. Eng. Sci., 107, 77-97. https://doi.org/10.1016/j.ijengsci.2016.07.011.
  15. Majeed, W.I., Al-Samarraie, S.A. and Alsaior, M.M. (2013), "Vibration control analysis of a smart flexibale cantilever beam using smart material", J. Eng., 19(1). 82-95. https://doi.org/10.31026/j.eng.2013.01.06.
  16. Murmu, T. and Pradhan, S.C. (2009), "Thermo-mechanical vibration of a single-walled carbon nanotube embedded in an elastic medium based on nonlocal elasticity theory", Comput. Mater. Sci., 46(4), 854-859. https://doi.org/10.1016/j.commatsci.2009.04.019.
  17. Narendar, S. and Gopalakrishnan, S. (2010), "Terahertz wave characteristics of a single-walled carbon nanotube containing a fluid flow using the nonlocal Timoshenko beam model", Physica E, 42(5) 1706-1712. https://doi.org/10.1016/j.physe.2010.01.028
  18. Nejati, M., Eslampanah, A. and Najafizadeh, M.H. (2016), "Buckling and vibration analysis of functionally graded carbon nanotube-reinforced beam under axial load", Int. Appl. Mech., 8(1), 1650008. https://doi.org/10.1142/S1758825116500083.
  19. Paul, R., Kumbhakar, P. and Mitra, A.K. (2013), "A facile chemical synthesis of a novel photo catalyst: SWCNT/titania nanocomposite", Adv. Nano Res., Int. J., 1(2), 71-82. https://doi.org/10.12989/anr.2013.1. 2.071.
  20. Rouhi, S., Ansari, R. and Ahmadi, M. (2017), "Finite element investigation into the thermal conductivity of carbon nanotube/aluminum nanocomposites", Mod. Phys. Lett. B, 31(6), 1750053. https://doi.org/10.1142/S0217984917500531.
  21. Selim, M.M. (2013), "Dispersion of Dilatation Wave Propagation in Single-Wall Carbon Nanotubes Under Initial Stress Using Nonlocal Scale Effects", J. Comput. Theo. Nanos., 10, 2547-2554. https://doi.org/10.1166/jctn.2013.3245.
  22. Selmi, A. (2019), "Effectiveness of SWNT in reducing the crack effect on the dynamic behavior of aluminium alloy", Adv. Nano Res., Int. J., 7(5), 365-377. https://doi.org/10.12989/anr.2019.7.5.365.
  23. Selmi, A. and Bisharat, A. (2018), "Free vibration of functionally graded SWNT reinforced aluminum alloy beam", J. Vibroeng., 20(5), 2151-2164. https://doi.org/10.21595/jve.2018.19445.
  24. Selmi, A., Friebel, C., Doghri, I. and Hassis, H. (2007), "Prediction of the elastic properties of single walled carbon nanotube reinforced polymers: A comparative study of several micromechanical models", Compos. Sci. Technol., 67(10), 2071-2084. https://doi.org/10.1016/j.compscitech.2006.11.016.
  25. Shaban, M. and Alibeigloo, A. (2014), "Three-dimensional vibration and bending analysis of carbon nanotubes embedded in elastic medium based on theory of elasticity", Lat. Am. j. solids struct., 11(12), 2122-2140. http://dx.doi.org/10.1590/S1679-78252014001200002.
  26. Shen, H.S. (2009), "Nonlinear bending of functionally graded carbon nanotube reinforced composite plates in thermal environments", Compos. Struct., 91(1), 9-19. https://doi.org/10.1016/j.compstruct.2009.04.026.
  27. Shenas, A.G., Ziaee, S. and Malekzadeh, P. (2018), "A unified higher-order beam theory for free vibration and buckling of FGCNT-reinforced microbeams embedded in elastic medium based on unifying stress-strain gradient framework", Iran J. Sci. Technol. Trans. Mech. Eng., 43(1), 469-492. https://doi.org/10.1007/s40997-018-0171-z.
  28. Simsek, M. (2010), "Vibration analysis of a single-walled carbon nanotube under action of a moving harmonic load based on nonlocal elasticity theory", Physica E, 43(1), 182-191. https://doi.org/10.1016/j.physe.2010.07.003.
  29. Soltani, P., Taherian, M.M. and Farshidianfar, A. (2010), "Vibration and instability of a viscous-fluid-conveying single-walled carbon nanotube embedded in a visco-elastic medium", J. Phys. D Appl. Phys., 43(42), 425401.
  30. Wang, Q. and Varadan, V. (2006), "Vibration of carbon nanotubes studied using nonlocal continuum mechanics", Smart Mater. Struct., 15(2), 659. https://doi.org/10.1088/0964-1726/15/2/050.
  31. Yas, M.H.H. and Samadi, N. (2012), "Free vibrations and buckling analysis of carbon nanotube-reinforced composite Timoshenko beams on elastic foundation", Int. J. Press. Vessel. Pip., 98, 119-128. https://doi.org/10.1016/j.ijpvp.2012.07.012.
  32. Zainuddin, H.B. and Ali, M.B. (2016), "Study of wheel rim impact test using finite element analysis", Proceedings of Mechanical Engineering Research Day, 141-142.
  33. Zhao, Y., Liu, K., Hou, H. and Chen, L.Q. (2022), "Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: A phase field study", Mater. Des., 216, 1-14, 110555. https://doi.org/10.1016/j.matdes.2022.110555.