Structural Engineering and Mechanics

  • 제90권5호
  • /
  • Pages.467-480
  • /
  • 2024
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical properties and durability of roller-compacted concrete incorporating powdered and granulated blast furnace slag in frost regions

  • Morteza Madhkhan (Department of Civil Engineering, Isfahan University of Technology (IUT)) ;
  • Mohsen Shamsaddini (Department of Civil Engineering, Isfahan University of Technology (IUT)) ;
  • Amin Tanhadoust (Department of Civil Engineering, Isfahan University of Technology (IUT))
  • 투고 : 2022.12.15
  • 심사 : 2024.05.07
  • 발행 : 2024.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanical properties and durability of concrete pavements may be degraded in extreme situations, resulting in the need for partial repair or total replacement. During the past few decades, there has been a growing body of research on substituting a portion of Portland cement with alternative cementitious materials for improving concrete properties. In this study, two different configurations of powdered and granulated blast furnace slag were implemented, replacing fine aggregates (by 12 wt.%) and Portland cement (by 0, 20, 40, and 60 wt.%) in the making of roller-compacted concrete (RCC) mixes. The specimens were fabricated to investigate the mechanical properties and durability specifications, involving freeze-thaw, salt-scaling, and water absorption resistance. The experimental results indicated that the optimum mechanical properties of RCC mixes could be achieved when 20-40 wt.% of powdered slag was added to concrete mixes containing slag aggregates. Accordingly, the increases in compressive, tensile, and flexural strengths were 45, 50, and 28%, in comparison to the control specimen at the age of 90 days. Also, incorporating 60 wt.% of powdered slag gave rise to the optimum mix plan in terms of freeze-thaw resistance such that a negligible strength degradation was experienced after 300 cycles. In addition, the optimal moisture content of the proposed RCC mixtures was measured to be in the range of 5 to 6.56%. Furthermore, the partial addition of granulated slag was found to be more advantageous than using entirely natural sand in the improvement of the mechanical and durability characteristics of all mixture plans.

키워드

참고문헌

  1. ACI Committee 211 (2009), ACI 211.3-02: Standard Practice for Selecting Proportions for No-Slump Concrete.
  2. ACI Committee 226 (1987), ACI 226.1R: Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete.
  3. ACI Committee 233 (2001), ACI 233R-95: Ground Granulated Blast Furnace Slag as a Cementitious Constituent in Concrete, American Concrete Institute, American Concrete Institute, Farmington Hills, Michigan, USA.
  4. ACI Committee 325 (2001), ACI 325.10R-95: Report on Roller Compacted Concrete Pavements.
  5. Aghaeipour, A. and Madhkhan, M. (2017), "Effect of ground granulated blast furnace slag (GGBFS) on RCCP durability", Constr. Build. Mater., 141, 533-541. https://doi.org/10.1016/j.conbuildmat.2017.03.019.
  6. Aghaeipour, A. and Madhkhan, M. (2020), "Mechanical properties and durability of roller compacted concrete pavement (RCCP)-A review", Road Mater. Pavem. Des., 21(7), 1775-1798. https://doi.org/10.1080/14680629.2019.1579754.
  7. Ashrafian, A., Gandomi, A.H., Rezaie-Balf, M. and Emadi, M. (2020), "An evolutionary approach to formulate the compressive strength of roller compacted concrete pavement", Measure., 152, 107309. https://doi.org/10.1016/j.measurement.2019.107309.
  8. Association, P.C. and others (2004), "Frost durability of roller compacted concrete pavements", Research and Development Bulletin RD135, 150.
  9. ASTM (2002), ASTM C78/C78M-02, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, USA.
  10. ASTM (2012), ASTM, D1557-12, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort, ASTM International, West Conshohocken, PA, ASTM Standard Guide.
  11. ASTM (2015), C666/C666M-15 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, PA.
  12. ASTM (2017), C496/C496M-17: Standard Test Method for Splitting Tensile Strength of cylindrical concrete specimens, Annual Book of ASTM Standards.
  13. ASTM (2020), ASTM C1435/C1435M-20: Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer, ASTM International, West Conshohocken, PA.
  14. ASTM C672 (2012), ASTM C672 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals, Annual Book of ASTM Standards.
  15. ASTM-C642 (2013), ASTM C642-13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, Annual Book of ASTM Standards.
  16. British Standards Institution (1970), BS 1881: Methods of Testing Hardened Concrete for Other than Strength. BSI Milton Keynes.
  17. Calis, G. and Yildizel, S.A. (2019), "Investigation of roller compacted concrete: Literature review", Chall. J. Concrete Res. Lett., 10(3). 63. https://doi.org/10.20528/cjcrl.2019.03.003.
  18. Chatterji, S. (1999), "Aspects of the freezing process in a porous material-water system: Part 1. Freezing and the properties of water and ice", Cement Concrete Res., 29(4), 627-630. https://doi.org/10.1016/S0008-8846(99)00035-6.
  19. Hesami, S., Modarres, A., Soltaninejad, M. and Madani, H. (2016), "Mechanical properties of roller compacted concrete pavement containing coal waste and limestone powder as partial replacements of cement", Constr. Build. Mater., 111, 625-636. https://doi.org/10.1016/j.conbuildmat.2016.02.116.
  20. Illangakoon, G.B., Asamoto, S., Nanayakkara, A. and Trong, L.N. (2019), "Concrete cold joint formation in hot weather conditions", Constr. Build. Mater., 209, 406-415. https://doi.org/10.1016/j.conbuildmat.2019.03.093.
  21. Lam, M.N.T., Jaritngam, S. and Le, D.H. (2017), "Roller-compacted concrete pavement made of Electric Arc Furnace slag aggregate: Mix design and mechanical properties", Constr. Build. Mater., 154, 482-495. https://doi.org/10.1016/j.conbuildmat.2017.07.240.
  22. Lam, M.N.T., Le, D.H. and Jaritngam, S. (2018), "Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash", Constr. Build. Mater., 191, 912-922. https://doi.org/10.1016/j.conbuildmat.2018.10.080.
  23. Madhkhan, M., Azizkhani, R. and Harchegani, M.T. (2012), "Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of RCC pavements", Constr. Build. Mater., 26(1), 102-112. https://doi.org/10.1016/j.conbuildmat.2011.05.009.
  24. Mardani-Aghabaglou, A., Andic-Cakir, O. and Ramyar, K. (2013), "Freeze-thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method", Cement Concrete Compos., 37, 259-266. https://doi.org/10.1016/j.cemconcomp.2013.01.009.
  25. Nili, M. and Zaheri, M. (2011), "Deicer salt-scaling resistance of non-air-entrained roller-compacted concrete pavements", Constr. Build. Mater., 25(4), 1671-1676. https://doi.org/10.1016/j.conbuildmat.2010.10.004.
  26. Rahmani, E., Sharbatdar, M.K. and Beygi, M.H.A. (2020), "A comprehensive investigation into the effect of water to cement ratios and cement contents on the physical and mechanical properties of Roller Compacted Concrete Pavement (RCCP)", Constr. Build. Mater., 253, 119177. https://doi.org/10.1016/j.conbuildmat.2020.119177.
  27. Ramezanianpour, A.A., Mohammadi, A., Dehkordi, E.R. and Chenar, Q.B. (2017), "Mechanical properties and durability of roller compacted concrete pavements in cold regions", Constr. Build. Mater., 146, 260-266. https://doi.org/10.1016/j.conbuildmat.2017.04.099.
  28. Rao, S.K., Sravana, P. and Rao, T.C. (2016), "Abrasion resistance and mechanical properties of Roller Compacted Concrete with GGBS", Constr. Build. Mater., 114, 925-933. https://doi.org/10.1016/j.conbuildmat.2016.04.004.
  29. Rao, S.K., Sravana, P. and Rao, T.C. (2016), "Experimental studies in Ultrasonic Pulse Velocity of roller compacted concrete pavement containing fly ash and M-sand", Int. J. Pavem. Res. Technol., 9(4), 289-301. https://doi.org/10.1016/j.ijprt.2016.08.003.
  30. Rostasy, F.S., Schneider, U. and Wiedemann, G. (1979), "Behaviour of mortar and concrete at extremely low temperatures", Cement Concrete Res., 9(3), 365-376. https://doi.org/10.1016/0008-8846(79)90129-7.
  31. Shafigh, P., Hashemi, M., Nam, B.H. and Koting, S. (2020), "Optimum moisture content in roller-compacted concrete pavement", Int. J. Pavem. Eng., 21(14), 1769-1779. https://doi.org/10.1080/10298436.2019.1567919.
  32. Siamardi, K. and Shabani, S. (2021), "Evaluation the effect of micro-synthetic fiber on mechanical and freeze-thaw behavior of non-air-entrained roller compacted concrete pavement using response surface methodology", Constr. Build. Mater., 295, 123628. https://doi.org/10.1016/j.conbuildmat.2021.123628.
  33. Wang, C., Chen, W., Hao, H., Zhang, S., Song, R. and Wang, X. (2018), "Experimental investigations of dynamic compressive properties of roller compacted concrete (RCC)", Constr. Build. Mater., 168, 671-682. https://doi.org/10.1016/j.conbuildmat.2018.02.112.
  34. Wang, G.C. (2016), "Slag use in asphalt paving", Utiliz. Slag Civil Infrastr. Constr., 201-238.