DOI QR코드

DOI QR Code

Seismic performance of Bujian Puzuo considering scale ratio and vertical load effects

  • Yong-Hui Jiang (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Jun-Xiao He (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Lei Zhu (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Lin-Lin Xie (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture) ;
  • Shuo Fang (Beijing Institute of Surveying and Mapping)
  • Received : 2023.11.20
  • Accepted : 2024.05.02
  • Published : 2024.06.10

Abstract

This study investigated the influence of scale ratio and vertical load on the seismic performance of Puzuo joints in traditional Chinese timber structures. Three low-cyclic reversed loading tests were conducted on three scaled specimens of Bujian Puzuo in Yingxian Wooden Pagoda. This study focused on the deformation patterns and analyzed seismic performance under varying scale ratios and vertical loads. The results indicated that the slip and rotational deformations of Bujian Puzuo were the primary deformations. The scale of the specimen did not affect the layer where the maximum interlayer slip occurred, but it did decrease the proportion of slip deformation. Conversely, the reducing vertical load caused the layer with the maximum slippage and the position of the damaged Dou components to shift upward, and the proportion of slip deformation increased. When the vertical load was decreased by 3.7 times, the maximum horizontal bearing capacity under positive and negative loadings, initial stiffness, and energy dissipation of the specimen decreased by approximately 60%, 58.79%, 69.62%, and 57.93%, respectively. The horizontal bearing capacity under positive loading and energy dissipation of the specimen increased by 35.63% and 131.54%, when the specimen scale was doubled and the vertical load was increased by 15 times.

Keywords

Acknowledgement

The research described in this paper was financially supported by National Natural Science Foundation of China (No. 52108266). The financial support of the Pyramid Talent Training Project of Beijing University of Civil Engineering and Architecture (JDYC20220808) is also acknowledged.

References

  1. Aejaz, S.A., Dar, A.R. and Bhat, J.A. (2020), "Structural performance of timber frame joints-full scale tests and numerical validation", Struct. Eng. Mech., 74(4), 457-470. https://doi.org/10.12989/sem.2020.74.4.457.
  2. Chen, J.Y., Li, T.Y., Yang, Q.S., Shi, X.W. and Zhao, Y.X. (2018), "Degradation laws of hysteretic behaviour for historical timber buildings based on pseudo-static tests", Eng. Struct., 156, 480-489. https://doi.org/10.1016/j.engstruct.2017.11.054.
  3. Chen, J.Z., Chen, X.Y. and Dai, L. (2020), "Experimental research on mechanical performance of damaged bracket set joints", J. Beijing Forestry Univ., 42(02), 149-158. (in Chinese)
  4. Chen, Z.Y., Zhu, E.C., Lam, F. and Pan. J.L. (2014), "Structural performance of Dou-Gong brackets of Yingxian Wood Pagoda under vertical load-An experimental study", Eng. Struct., 80, 274-288. https://doi.org/10.1016/j.engstruct.2014.09.013.
  5. D'Ayala, D.F. and Tsai, P.H. (2008), "Seismic vulnerability of historic Dieh-Dou timber structures in Taiwan", Eng. Struct., 30(8), 2101-113. https://doi.org/10.1016/j.engstruct.2007.11.007.
  6. Dong, X.Y., Ma, L.L. and Xue, J.Y. (2023), "Mechanical behaviors of Tou-Kung in historic timber structures subjected to vertical load", Struct., 47, 1352-1365. https://doi.org/10.1016/j.istruc.2022.11.134.
  7. Fujita, K. (2019), "Dynamic performance of bracket complexes used in traditional timber structures in Japan", Proc. JPN Acad., Ser. B, 95(9), 568-580. https://doi.org/10.2183/pjab.95.038.
  8. Gao, C. and He, J.X. (2021), "Dynamic response of wooden columns in traditional timber structures under horizontal earthquake", Int. J. Struct. Stab. Dyn., 21(10), 2150134. https://doi.org/10.1142/S0219455421501340.
  9. He, J.X., Wang, J., Yang, Q.S., Han, M. and Deng, Y. (2021), "Study on mechanical behaviors of loose mortise-tenon joint with neighbouring gap", Struct. Eng. Mech., 77(4), 509-521. https://doi.org/10.12989/sem.2021.77.4.509.
  10. Hou, W.D., Wang, L.A. and Yong, X.Q. (2016), Research and Protection of Yingxian Wooden Pagoda, Culture Relics Publishing House, Beijing, China.
  11. Imaeda, K., Yamasaki, M., Kojima, E., Lee, C.G., Sugimoto, T. and Sasaki, Y. (2020), "Energetic investigation of aging effect on mechanical behavior in wood by means of XRD measurement", Int. J. Arch. Herit., 16(1), 1-8. https://doi.org/10.1080/15583058.2020.1743793.
  12. JGJ/T 101-2015 (2015), Ministry of Housing and Urban-Rural Development Specification for Seismic Test of Buildings, Ministry of Housing and Urban-Rural Development of the People's Republic of China, Beijing, China.
  13. Li, A.Q., Liu, C.Z., He, J.X. and Jiang, Y.H. (2022), "Experimental study of seismic performance of Zhutou Puzuo with 'Ang' under different vertical loads", Eng. Mech., 1-14. (in Chinese)
  14. Li, J. (1954), Ying-Tsao-Fa-Shih, China Bookstore Press, Beijing, China.
  15. Liang, S.C. (2005), Chinese Architecture: A Pictorial History, Dover Publications, New York, NY, USA.
  16. Liu, H.Y. (2020), "Extraction and application of Song-Style DouGong skeleton based on point cloud data", Master's Thesis, Beijing University of Civil Engineering and Architecture, Beijing. (in Chinese)
  17. Meng, X.J., Li, T.Y. and Yang, Q.S. (2018), "Lateral structural performance of column frame layer and Dou-Gong layer in a timber structure", KSCE J. Civil Eng., 23, 666-677. https://doi.org/10.1007/s12205-018-0259-4.
  18. Meng, X.J., Li, T.Y. and Yang, Q.S. (2019), "Experimental study on the seismic mechanism of a full-scale traditional Chinese timber structure", Eng. Struct., 180, 484-493. https://doi.org/10.1016/j.engstruct.2018.11.055.
  19. Park, S.A., Choi, J.S. and Min, K.W. (2011), "Dynamic characteristics for traditional wooden structure in Korea by using impact hammer test", Procedia Eng., 14, 477-484. https://doi.org/10.1016/j.proeng.2011.07.059.
  20. Qi, L.J., Xue, J.Y. and Xu, D. (2020), "Experimental and numerical studies on cyclic behavior of continuous-tenon joints in column-and-tie timber construction", Struct. Eng. Mech., 75(5), 529-540. https://doi.org/10.12989/sem.2020.75.5.529.
  21. Schneider, J., Karacabeyli, E., Popovski, M., Stiemer, S. and Tesfamariam, S. (2014), "Damage assessment of connections used in cross-laminated timber subject to cyclic loads", J. Perform. Constr. Facil., 28(6), A4014008. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000528
  22. Song, D.J., Xue, J.Y. and Wu, C.W. (2022), "Experimental study on seismic performance of Pingshenke Dou-Gong bracket under the overhanging and width loading direction", J. Buil. Eng., 61, 105315. https://doi.org/10.1016/j.jobe.2022.105315.
  23. Wu, C.W., Xue, J.Y. and Song, D.J. (2023), "Experimental and numerical study on the mechanical performance of dou-gong bracket at the corner under vertical load", Int. J. Arch. Herit., 1-25. https://doi.org/10.1080/15583058.2023.2169209.
  24. Wu, C.W., Xue, J.Y., Song, D.J. and Liang, X.W. (2022), "Analysis on the mechanical performance of Dougong bracket sets under eccentric vertical load", Constr. Build. Mater., 314, 125652. https://doi.org/10.1016/j.conbuildmat.2021.125652.
  25. Wu, Y.J., Song, X.B. and Li, K. (2018), "Compressive and racking performance of eccentrically aligned Dou-Gong connections", Eng. Struct., 175, 743-752. https://doi.org/10.1016/j.engstruct.2018.08.054.
  26. Xie, Q.F., Wang, L., Zhang, L.P., Xiang, W. and Hu, W.B. (2020), "Rotational behaviors of fork-column Dou-Gong: Experimental tests and hysteresis model", J. Perform. Constr. Facil., 34(3), 04020032. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001426.
  27. Xie, Q.F., Xiang, W., Du, B., Zheng, P.J. and Wu, B. (2015), "Experimental study on seismic behavior of fork-column "Dougong" joints in timber structures of Chinese ancient buildings", China Civil Eng. J., 48(08), 19-28. (in Chinese)
  28. Xue, J.Y., Liang, X.W., Wu, C.W., Song, D.J. and Qi, L.J. (2022), "Experimental and numerical study on eccentric compression performance of Dou-Gong brackets at column tops", Struct., 35, 608-621. https://doi.org/10.1016/j.istruc.2021.11.035.
  29. Yang, Q.S., He, J.X. and Wang, J. (2021), "Study on the mechanical behaviors of timber frame with the simplified column foot joints", Struct. Eng. Mech., 77(3), 383-394. https://doi.org/10.12989/sem.2021.77.3.383.
  30. Yeo, S.Y., Komatsu, K., Hsu, M.F. and Que, Z. (2016), "Mechanical model for complex brackets system of the Taiwanese traditional Dieh-Dou timber structures", Adv Struct Eng, 19(1), 65-85. https://doi.org/10.1177/1369433215618269.
  31. Yu, P., Li, T.Y. and Yang Q.S. (2023), "Inelastic behavior of Mortise-Tenon jointed traditional timber frame with free-standing columns", Int. J. Arch. Herit., 1-18. https://doi.org/10.1080/15583058.2023.2203669.
  32. Yu, P., Yang, Q.S., Law, S.S. and Liu, K. (2022), "Seismic performances assessment of heritage timber frame based on energy dissipation", J. Buil. Eng., 56, 104762. https://doi.org/10.1016/j.jobe.2022.104762.
  33. Zhang, L., Chang, Z.N., Li, Q. and Zhou, T. (2020), "Experimental research on the anti-seismic properties of a five-stamping Tou-Kung joint of ancient Chinese buildings in the Ming Dynasty: A case study of Guang-yue Tower in Liaocheng City, Shandong Province", Int. J. Arch. Herit., 9(14), 1360-1372. https://doi.org/10.1080/15583058.2019.1607626.
  34. Zhang, L.P., Xie, Q.F., Wu, Y.J. and Zhang, B.Z. (2023), "Research progress on constitutive model for wood", J. Build. Struct., 44(05), 286-304. https://doi.org/10.14006/j.jzjgxb.2021.0710.
  35. Zhou, Q., Yang, N. and Chun, Q. (2017), "Experiments on seismic performance of bracket sets of second eave of Taihe Palace in the Forbidden City", J. Southeast Univ. (Nat. Sci. Ed.), 47(01), 150-158. (in Chinese)
  36. Zhou, T., Song, X.F., Zhang, L. and Sun, R. (2022), "Experimental and numerical study on Dou-Gong joint of ancient wooden structure in Qing Dynasty", Int. J. Arch. Herit., 1-18. https://doi.org/10.1080/15583058.2022.2113571.