DOI QR코드

DOI QR Code

염색 폐수 슬러지를 활용한 탄소저감형 이산화티타늄 제조 및 특성 분석

Carbon-Reduced Titanium Dioxide Production and Characterization Using Dyeing Wastewater Sludge

  • 김종규 (신한대학교 에너지공학과)
  • Jong Kyu Kim (Department of Energy Engineering, Shinhan University)
  • 투고 : 2024.03.26
  • 심사 : 2024.05.13
  • 발행 : 2024.05.27

초록

This study is to manufacture a titanium dioxide (TiO2) photocatalyst by recycling sludge generated using titanium tetrachloride (TiCl4) as a coagulant. Compared to general sewage, a TiCl4 coagulant was applied to dyeing wastewater containing a large amount of non-degradable organic compounds to evaluate its performance. Then the generated sludge was dried and fired to prepare a photocatalyst (TFS). Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), and nitrogen oxide reduction experiments were conducted to analyze the surface properties and evaluate the photoactive ability of the prepared TFS. After using titanium tetrachloride (TiCl4) as a coagulant in the dyeing wastewater, the water quality characteristics were measured at 84 mg/L of chemical oxygen demand (COD), 10 mg/L of T-N, and 0.9 mg/L of T-P to satisfy the discharge water quality standards. The surface properties of the TFS were investigated and the anatase crystal structure was observed. It was confirmed that the ratio of Ti and O, the main components of TiO2, accounted for more than 90 %. As a result of the nitric oxide (NO) reduction experiment, 1.56 uMol of NO was reduced to confirm a removal rate of 20.60 %. This is judged to be a photocatalytic performance similar to that of the existing P-25. Therefore, by applying TiCl4 to the dyeing wastewater, it is possible to solve the problems of the existing coagulant and to reduce the amount of carbon dioxide generated, using an eco-friendly sludge treatment method. In addition, it is believed that environmental and economic advantages can be obtained by manufacturing TiO2 at an eco-friendly and lower cost than before.

키워드

과제정보

This work was supported by the Shinhan University Research Fund, 2023.

참고문헌

  1. C.-H. Shin and D.-H. Park, J. Environ. Sci. Int., 23, 1881 (2014).
  2. J.-S. Ahn, T.-S. Park and J.-H. Cho, J. Korea Acad.-Ind. Coop. Soc., 12, 4274 (2011).
  3. S. Pyo, M. Kim, S. Lee and C. Yoo, Korean Chem. Eng. Res., 52, 503 (2014).
  4. Y.-R. Han, K.-H. Lee, J.-H. Jung, D.-H. Kang and Y.-I. Choi, J. Korean Soc. Environ. Technol., 12, 125 (2011).
  5. K. Kim, J. Jeon and I. Yeom, J. Korean Soc. Environ. Eng., 45, 51 (2023).
  6. N. Firdous, I. A. Shaikh, S. Islam and Y. Sadaf, AATCC J. Res., 5, 9 (2018).
  7. J. Galloux, L. Chekli, S. Phuntsho, L. D. Tijing, S. Jeong, Y. X. Zhao, B. Y. Gao, S. H. Park and H. K shon, Sep. Purif. Technol., 152, 94 (2015).
  8. S. Kim, S. Kang, S. Kang, J. Lee, J.-H. Sa, S.-J. Park and E.-C. Jean, J. Clim. Change Res., 5, 209 (2014).
  9. S. M. Hossain, M. J. Park, H. J. Park, L. Tijing and J. H. Kim, J. Environ. Manage., 250, 109521(2019).
  10. Y. X. Zhao, B. Y. Gao, H. K. Shon, B. C. Cao and J. H. Kim, J. Hazard. Mater., 185, 1536 (2011).
  11. K. J. Jeon, J. H. Kim and J. H. Ahn, Water Environ. Res., 89, 739 (2017).
  12. H. J. Lee, Y. G. Park, S. H. Lee and J. H. Park, Korean Chem. Eng. Res., 56, 156 (2018).
  13. J.-H. Gong, Master's Thesis (in Korean), p. 1, Kyungnam University, Changwon (2020).
  14. C. Kang, W. Yeo, B. C. Na, H.-J.Chung, H. Chang and J. K. Kim, J. Korean Soc. Text. Sci. Eng., 60, 90 (2023).
  15. H. Li, W. Zhang and W. Pan, J. Am. Ceram. Soc., 94, 3184 (2011).
  16. J. H. Park, J. J. Park, H. J. Park and K. B. Yi, Clean Technol., 26, 304 (2020).