과제정보
This study was financially supported by the National Natural Science Foundation of China (No. 51601184) and the National Science and Technology Major Project of China (No. 2011ZX06004-016).
참고문헌
- F. Nagase, T. Ohtomo, H. Uetsuka, Release behaviors of elements from an Ag-In-Cd control rod alloy at temperatures up to 1673 K, Nucl. Technol. 208 (2022) 484-493. https://doi.org/10.1080/00295450.2021.1905472
- A. Strasser, W. Yario, Control Rod Materials and Burnable Poisons. EPRI TPS 79-708, Electric Power Research Institute, 1980.
- H. Chen, H. Wang, Q. Sun, C. Long, T. Wei, H. Xiao, Y. Zhao, Microstructural evolution and mechanical properties of an AgInCd alloy during compressive deformation process, J. Alloys Compd. 770 (2019) 608-615. https://doi.org/10.1016/j.jallcom.2018.08.138
- M. Steinbruck, U. Stegmaier, M. Grosse, Experiments on silver-indium-cadmium control rod failure during severe nuclear accidents, Ann. Nucl. Energy 101 (2017) 347-358. https://doi.org/10.1016/j.anucene.2016.11.039
- W. Wan, H. Chen, C. Long, Q. Sun, G. Li, H. Wang, Q. Tang, The compressive deformation mechanisms of a coarse-grained AgInCd alloy, Mater. Char. 134 (2017) 279-284. https://doi.org/10.1016/j.matchar.2017.11.015
- J. Kalilainen, T. Lind, J. Stuckert, T. Bergfeldt, O. Sippula, J. Jokiniemi, The measurement of Ag/In/Cd release under air-ingress conditions in the QUENCH-18 bundle test, J. Nucl. Mater. 517 (2019) 315-327. https://doi.org/10.1016/j.jnucmat.2019.02.021
- W. Wan, H. Chen, H. Wang, C. Long, Q. Sun, Y. Li, G. Li, J. Luo, Microstructure evolution and mechanical properties of the compressively deformed AgInCd alloy during annealing treatment, Mater. Char. 138 (2018) 165-173. https://doi.org/10.1016/j.matchar.2018.02.012
- Cs Maraczy, ' A. Kereszturi, I. Trosztel, Gy Hegyi, Safety analysis of reactivity initiated accidents in a HPLWR reactor by the coupled ATHLET-KIKO3D code, Prog. Nucl. Energy 52 (2010) 190-196. https://doi.org/10.1016/j.pnucene.2009.06.005
- H. Chen, C. Long, H. Xiao, L. Chen, T. Wei, Microstructure and creep mechanism of the Ag-In-Cd alloy under compressive load at 300-400 ℃, Mater. Des. 65 (2015) 468-472. https://doi.org/10.1016/j.matdes.2014.09.048
- O. Noori-Kalkhoran, A. Minuchehr, R. Akbari-Jeyhouni, A.S. Shirani, M. Rahgoshay, Simulation of rod ejection accident in a WWER-1000 Nuclear Reactor by using PARCS code, Ann. Nucl. Energy 65 (2014) 132-140. https://doi.org/10.1016/j.anucene.2013.11.003
- P.J. Sipush, J. Woodcock, R.W. Chickering, Lifetime of PWR Silver-Indium-Cadmium Control Rods, Electric Power Research Institute Report NP-4512, 1986.
- H. Chen, C. Long, H. Xiao, T. Wei, G. Le, Estimation of the chemical compositions and corresponding microstructures of AgInCd absorber under irradiation condition, Nucl. Eng. Technol. 52 (2020) 344-351. https://doi.org/10.1016/j.net.2019.07.021
- G.S. Was, Fundamentals of Radiation Materials Science: Metals and Alloys, Springer, Berlin/Heidelberg, Germany, 2016.
- D.R. Olander, Fundamental Aspects of Nuclear Reactor Fuel Elements, U.S. Department of Commerce, National Technical Information Service, Oak Ridge, 1976.
- T. Matsuoka, Y. Yamaguchi, T. Yonezawa, K. Murakami, S. Shiraishi, T. Nagata, Cladding tube cracking caused by absorber swelling for PWR RCCA rodlets, J. Nucl. Sci. Technol. 36 (1999) 584-595. https://doi.org/10.1080/18811248.1999.9726242
- J. Bourgoin, F. Couvreur, D. Gosset, F. Defoort, M. Monchanin, X. Thibaul, The behaviour of control rod absorber under irradiation, J. Nucl. Mater. 275 (1999) 296-304. https://doi.org/10.1016/S0022-3115(99)00124-5
- C. Desgranges, Understanding and Predicting the Behaviour of Silver Base Neutron Absorbers under Irradiations, CEA Technical Report, 1998. CEA-R-5805.
- I.C. Gauld, G. Radulescu, G. Ilas, B.D. Murphy, M.L. Williams, D. Wiarda, Isotopic depletion and decay methods and analysis capabilities in SCALE, Nucl. Technol. 174 (2011) 169-195. https://doi.org/10.13182/NT11-3
- G. Gottstein, Physical Foundations of Materials Science, Springer-Verlag Berlin Heidelberg, 2004.
- C.F. Reinke, Examination of Irradiated Ag-In-Cd Alloys, AEC Research and Development Report, 1965. ANL-6883.
- R.A. Murgatroyd, B.T. Kelly, Technology and assessment of neutron absorbing materials, Atom. Energy Rev. 15 (1977) 1.
- K.A.P.L. Reactor, Technology report No. 8 - metallurgy, Knolls Atomic Power Lab (1959). Technical Report, 1959 KAPL-2000-5.
- W.K. Anderson, J.S. Theilacker, Neutron Absorber Materials for Reactor Control, US Atomic Energy Commission, 1962.
- W.R. Smalley, Engineering and metallurgical evaluation of an irradiated yankee core I control rod, in: WCAP-6074, Westinghouse Electric Corp., Pittsburgh, July 1, 1966.
- D. Scott, Metallurgical Evaluation of AgInCd Control Rod Alloys, Westinghouse Technical Report, 1964. WCAP-2369-29.
- L. Heins, A. Roppelt, P. Dewes, Design of control rods for pressurized water reactors with special consideration of absorber swelling and clad creepdown, in: Advances in Control Assembly Materials for Water Reactors, IAEA-TECDOC-813, IAEA, Vienna, 1995, pp. 15-36.
- EPRI, Pressurized water reactor AgInCd control rod lifetime, in: EPRI Technical Report 1019106, Aug 27, 2009. https://www.epri.com/research/products/1019106.