Advances in nano research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Improving the mechanical properties of table tennis by adding nanocomposite in its polymer matrix

  • Shuping Xu (Physical education department, North China Electric Power University) ;
  • Lixin Liang (Physical education department, North China Electric Power University)
  • Received : 2022.06.08
  • Accepted : 2024.03.07
  • Published : 2024.04.25
⟨ Previous Next ⟩

Abstract

This study delves into the significant impact of integrating nanomaterials, specifically carbon and graphene nanoparticles, into the polymer matrix of aluminum alloy 356, utilizing the vortex casting technique, with the aim of improving the mechanical properties of table tennis equipment. Athletes and their coaching teams have long been on a quest for high-performance sports gear, recognizing its pivotal role in unlocking the full potential of players. The dedication of engineers to craft designs, select materials with precision, and uphold stringent testing standards reflects the commitment to meeting the demands of the sporting world. Yet, to remain at the forefront, sports engineering must continually align with contemporary technologies, and nanotechnology has emerged as a transformative force in this regard. This study not only underscores the meticulous efforts in material integration but also highlights the remarkable strides made possible by nanotechnology. Aluminum nanocomposites, particularly, showcase a groundbreaking fusion of exceptional strength and reduced weight, marking a notable achievement in sports equipment innovation. The research outcomes are compelling, revealing a substantial enhancement in the mechanical performance of the sports structures under scrutiny. This promising development hints at a potential paradigm shift in the manufacturing of sports equipment, promising a new era of elevated athlete performance and enhanced safety during the rigors of physical education training. This study stands as a testament to the tangible impact of nanotechnology on the ever-evolving landscape of sports equipment.

Keywords

References

  1. Ahmadi, M., Tabary, S.A.A.B., Rahmatabadi, D., Ebrahimi, M.S., Abrinia, K. and Hashemi, R. (2022), "Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications", J. Mater. Res. Technol., 19, 1537-1562. https://doi.org/10.1016/j.jmrt.2022.05.102.
  2. Ahmed, A., Adak, B., Faruk, M.O. and Mukhopadhyay, S. (2021), "Nanocellulose coupled 2D graphene nanostructures: emerging paradigm for sustainable functional applications", Ind. Eng. Chem. Res., 60(30), 10882-10916. https://doi.org/10.1021/acs.iecr.1c01830.
  3. Akaneeva, E., Bezhentseva, L., Lim, M. and Sosunovsky, V. (2022), "Use of non-standard sports equipment in physical education classes with preschool children", Theor. Pract. Phys. Culture, 10, 73-75.
  4. Assaedi, H., Alomayri, T., Shaikh, F. and Low, I.-M. (2019), "Influence of nano silica particles on durability of flax fabric reinforced geopolymer composites", Materials, 12(9), 1459. https://doi.org/10.3390/ma12091459.
  5. Azman, M., Asyraf, M., Khalina, A., Petru, M., Ruzaidi, C., Sapuan, S., Wan Nik, W., Ishak, M., Ilyas, R. and Suriani, M. (2021), "Natural fiber reinforced composite material for product design: A short review", Polymers, 13(12), 1917. https://doi.org/10.3390/polym13121917.
  6. Ban, J., Sun, K., Yao, J., Sunahara, G., Hudson-Edwards, K., Jordan, G., Alakangas, L., Ni, W. and Poon, C.S. (2022), "Advances in the use of recycled non-ferrous slag as a resource for non-ferrous metal mine site remediation", Environ. Res., 213, 113533. https://doi.org/10.1016/j.envres.2022.113533.
  7. Benedetti, M., du Plessis, A., Ritchie, R.O., Dallago, M., Razavi, S.M.J. and Berto, F. (2021), "Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication", Mater. Sci. Eng. R Rep., 144, 100606. https://doi.org/10.1016/j.mser.2021.100606.
  8. Cai, L., Yan, S., Ouyang, C., Zhang, T., Zhu, J., Chen, L., Ma, X. and Liu, H. (2023), "Muscle synergies in joystick manipulation", Front. Physiol., 14. https://doi.org/10.3389/fphys.2023.1282295.
  9. Cheng, Q., Ali, H.E. and Albaijan, I. (2023), "Optimization of the cross-section regarding the stability of nanostructures according to the dynamic analysis", Adv. Concr. Constr., 15(4), 215-228. https://doi.org/10.12989/acc.2023.15.4.215.
  10. Dai, Y., Jiang, Z., Chen, K.Y., Zuo, D., Ali, H.E. and Albaijan, I. (2023), "Geometry impact on the stability behavior of cylindrical microstructures: Computer modeling and application for small-scale sport structures", Steel Compos. Struct., 48(4), 443. https://doi.org/10.12989/scs.2023.48.4.443.
  11. Emery, C.A. and Pasanen, K. (2019), "Current trends in sport injury prevention", Best Pract. Res. Clin. Rheumatol., 33(1), 3-15. https://doi.org/10.1016/j.berh.2019.02.009.
  12. Faried, A.S., Mostafa, S.A., Tayeh, B.A. and Tawfik, T.A. (2021), "Mechanical and durability properties of ultra-high performance concrete incorporated with various nano waste materials under different curing conditions", J. Build. Eng., 43, 102569. https://doi.org/10.1016/j.jobe.2021.102569.
  13. Fonseca, S.T., Souza, T.R., Verhagen, E., van Emmerik, R., Bittencourt, N.F.N., Mendonca, L.D.M., Andrade, A.G.P., Resende, R.A. and Ocarino, J.M. (2020), "Sports injury forecasting and complexity: A synergetic approach", Sports Med., 50(10), 1757-1770. https://doi.org/10.1007/s40279-020-01326-4.
  14. Fu, L., Li, J., Yang, J., Liu, Y., He, C. and Chen, Y. (2023), "Purification process and reduction of heavy metals from industrial wastewater via synthesized nanoparticle for water supply in swimming/water sport", Adv. Nano Res., 15(5), 441-449. https://doi.org/10.12989/anr.2023.15.5.441.
  15. Fu, Z.H., Yang, B.J., Shan, M.L., Li, T., Zhu, Z.Y., Ma, C.P., Zhang, X., Gou, G.Q., Wang, Z.R. and Gao, W. (2020), "Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones", Corros. Sci., 164, 108337. https://doi.org/10.1016/j.corsci.2019.108337.
  16. Gao, Z., Zhao, N., Zhao, X., Niu, B. and Xu, N. (2024), "Event-triggered prescribed performance adaptive secure control for nonlinear cyber physical systems under denial-of-service attacks", Commun. Nonlinear Sci. Numer. Simul., 131, 107793. https://doi.org/10.1016/j.cnsns.2023.107793.
  17. Gonen, S., Pulatsu, B., Lourenco, P.B., Lemos, J.V., Tuncay, K. and Erduran, E. (2023), "Analysis and prediction of masonry wallette strength under combined compression-bending via stochastic computational modeling", Eng. Struct., 278, 115492. https://doi.org/10.1016/j.engstruct.2022.115492.
  18. Guan, S. (2023), "Systematic test on the effectiveness of MEMS nano-sensing technology in monitoring heart rate of Wushu exercise", Adv. Nano Res., 15(2), 155-163. https://doi.org/10.12989/anr.2023.15.2.155.
  19. He, L. and Deng, Q. (2023), "Construction of sports engineering structures with high resistance to improve the quality of sports training", Struct. Eng. Mech., 86(2), 211-220. https://doi.org/10.12989/sem.2023.86.2.211.
  20. Hua, Y., Li, F., Hu, N. and Fu, S.Y. (2022), "Frictional characteristics of graphene oxide-modified continuous glass fiber reinforced epoxy composite", Compos. Sci. Technol., 223, 109446. https://doi.org/10.1016/j.compscitech.2022.109446.
  21. Huang, Z. and Sun, X. (2022), "Efficiency Analysis of Sports Equipment Batch Management Based on Antimetal RFID Tag", J. Sensors, 2022, 2989375. https://doi.org/10.1155/2022/2989375.
  22. Jia, S., Niu, X., Jia, F. and Mahmoudi, T. (2023), "Advantages and disadvantages of renewable energy-oil-environmental pollution-from the point of view of nanoscience", Adv. Concr. Constr., 16(1), 69-78. https://doi.org/10.12989/acc.2023.16.1.069.
  23. Jin, H., Zhang, B. and Duan, X. (2023), "Impact of nanocomposite material to counter injury in physical sport in the tennis racket", Adv. Nano Res., 14(5), 435-442. https://doi.org/10.12989/anr.2023.14.5.435.
  24. Kang, H.B., Poudel, B., Li, W., Lee, H., Saparamadu, U., Nozariasbmarz, A., Kang, M.G., Gupta, A., Heremans, J.J. and Priya, S. (2020), "Decoupled phononic-electronic transport in multi-phase n-type half-Heusler nanocomposites enabling efficient high temperature power generation", Mater. Today, 36, 63-72. https://doi.org/10.1016/j.mattod.2020.01.002.
  25. Kumar Sharma, A., Bhandari, R., Aherwar, A., Rimasauskiene, R. and Pinca-Bretotean, C. (2020), "A study of advancement in application opportunities of aluminum metal matrix composites", Mater. Today Proc., 26, 2419-2424. https://doi.org/10.1016/j.matpr.2020.02.516.
  26. Lakshmikanthan, A., Angadi, S., Malik, V., Saxena, K.K., Prakash, C., Dixit, S. and Mohammed, K.A. (2022), "Mechanical and tribological properties of aluminum-based metal-matrix composites", Materials, 15(17), 6111. https://doi.org/10.3390/ma15176111.
  27. Lau, J.S. and Li, Z. (2023), "Human functions in innovation and sustainable marketing", Adv. Concr. Constr., 16(2), 97. https://doi.org/10.12989/acc.2023.16.2.097.
  28. Li, J., Bin, N., Guo, F., Gao, X., Chen, R., Yao, H. and Zhou, C. (2023a), "Analysis on the influence of sports equipment of fiber reinforced composite material on social sports development", Adv. Nano Res., 15(1), 49-57. https://doi.org/10.12989/anr.2023.15.1.049.
  29. Li, J., Li, J., Wang, C., Verbeek, F.J., Schultz, T. and Liu, H. (2024), "MS2OD: outlier detection using minimum spanning tree and medoid selection", Mach. Learn. Sci. Technol., 5(1), 015025. https://doi.org/10.1088/2632-2153/ad2492.
  30. Li, M., Guo, Q., Chen, L., Li, L., Hou, H. and Zhao, Y. (2022), "Microstructure and properties of graphene nanoplatelets reinforced AZ91D matrix composites prepared by electromagnetic stirring casting", J. Mater. Res. Technol., 21, 4138-4150. https://doi.org/10.1016/j.jmrt.2022.11.033.
  31. Li, X., Ali, H.E. and Albaijan, I. (2023b), "TiO 2-containing nanocomposite structure: Application and investigation in shoes sports medical soles in physical activities", Adv. Nano Res., 15(4), 329-337. https://doi.org/10.12989/anr.2023.15.4.329.
  32. Li, Y., Li, M., Kong, X., Baniasadi, A., Shaker, A.H. and Ali, H.E. (2023c), "Psychological capital to foster employee creativity in nanotechnology companies: the mediating role of JS and CSR", Adv. Nano Res., 15(3), 277-283. https://doi.org/10.12989/anr.2023.15.3.277.
  33. Li, Z. (2023), "Resistance of concrete made of fibers in weight lifting slabs against impact in sports training", Struct. Eng. Mech., 86(3), 325-336. https://doi.org/10.12989/sem.2023.86.3.325.
  34. Li, Z., Peng, S. and Chen, G. (2023d), "Research on safety assessment and application effect of nanomedical products in physical education", Adv. Nano Res., 15(3), 253-261. https://doi.org/10.12989/anr.2023.15.3.253.
  35. Lidstrom, I., Svanberg, I. and Stahlberg, S. (2022), "Traditional sports and games among the Sami people in Northern Fennoscandia (Sapmi): an ethnobiological perspective", J. Ethnobiol. Ethnomed., 18(1), 20. https://doi.org/10.1186/s13002-022-00517-9.
  36. Liu, F., Wang, C., Sui, X., Riaz, M.A., Xu, M., Wei, L. and Chen, Y. (2019), "Synthesis of graphene materials by electrochemical exfoliation: Recent progress and future potential", Carbon Energy, 1(2), 173-199. https://doi.org/10.1002/cey2.14.
  37. Liu, S., Niu, B., Xu, N. and Zhao, X. (2024), "Zero-sum game-based decentralized optimal control for saturated nonlinear interconnected systems via a data and event driven approach", IEEE Syst. J., 18(1), 758-769. https://doi.org/10.1109/JSYST.2024.3350771.
  38. Lystad, R.P., Alevras, A., Rudy, I., Soligard, T. and Engebretsen, L. (2021), "Injury incidence, severity and profile in Olympic combat sports: a comparative analysis of 7712 athlete exposures from three consecutive Olympic Games", British J. Sports Med., 55(19), 1077-1083. http://doi.org/10.1136/bjsports-2020-102958.
  39. Ma, Z., Qi, J., Xun, W. and Li, Y. (2023), "Sports injury treatment and sports rehabilitation employing the Nanoparticles containing zinc oxide", Adv. Nano Res., 15(1), 67-74. https://doi.org/10.12989/anr.2023.15.1.067.
  40. Mahto, M.K., Kumar, A., Raja, A.R., Vashista, M. and Yusufzai, M.Z.K. (2022), "Friction stir cladding of copper on aluminium substrate", CIRP J. Manuf. Sci. Technol., 36, 23-34. https://doi.org/10.1016/j.cirpj.2021.10.004.
  41. Maurya, A., Sinha, S., Kumar, P. and Singh, V. (2023), "A review: Impact of surface treatment of nanofillers for improvement in thermo mechanical properties of the epoxy based nanocomposites", Mater.s Today Proc., 78, 164-172. https://doi.org/10.1016/j.matpr.2023.01.178.
  42. Melentiev, R., Yudhanto, A., Tao, R., Vuchkov, T. and Lubineau, G. (2022), "Metallization of polymers and composites: State-ofthe-art approaches", Mater. Des., 221, 110958. https://doi.org/10.1016/j.matdes.2022.110958.
  43. Mileva, K.N. and Zaidell, L. (2022), Sport and Exercise Science and Health, Springer Singapore, Singapore.
  44. Mollahosseini, A. and Abdelrasoul, A. (2021), "Molecular dynamics simulation for membrane separation and porous materials: A current state of art review", J. Mol. Graphics Modell., 107, 107947. https://doi.org/10.1016/j.jmgm.2021.107947.
  45. Ohodnicki, P., Kautz, E.J., Devaraj, A., Yu, Y., Aronhime, N., Krimer, Y., McHenry, M.E. and Leary, A. (2021), "Nanostructure and compositional segregation of soft magnetic FeNi- based nanocomposites with multiple nanocrystalline phases", J. Mater. Res., 36(1), 105-113. https://doi.org/10.1557/s43578-020-00066-5.
  46. Pereira, R.M., Crizel, M.G., La Rosa Novo, D., dos Santos, C.M.M. and Mesko, M.F. (2019), "Multitechnique determination of metals and non-metals in sports supplements after microwave-assisted digestion using diluted acid", Microchem. J., 145, 235-241. https://doi.org/10.1016/j.microc.2018.10.043.
  47. Pradhan, S.K. and Chakraborty, B. (2020), "Substrate materials and novel designs for bipolar lead-acid batteries: A review", J. Energy Storage, 32, 101764. https://doi.org/10.1016/j.est.2020.101764.
  48. Qi, L., Wang, Z., Sun, Y., Khorami, M., Mahmoudi, T. and Wu, H. "Modified couple stress and artificial intelligence examination of nonlinear buckling in porous variable thickness cylinder micro sport structures", Mech. Adv. Mater. Struct., 1-19. https://doi.org/10.1080/15376494.2024.2316795.
  49. Salonen, H., Salthammer, T. and Morawska, L. (2020), "Human exposure to air contaminants in sports environments", Indoor Air, 30(6), 1109-1129. https://doi.org/10.1111/ina.12718.
  50. Semsch, H. (2020), "Principles of sports equipment and sportswear", Injury Health Risk Manag. Sports, 235-241. https://doi.org/10.1007/978-3-662-60752-7_36.
  51. Shalaby, M.N. and Saad, M.M. (2020), "Advanced material engineering and nanotechnology for improving sports performance and equipment", Int. J. Psychosocial Rehabil., 24(10), 2314-2322. https://doi.org/10.37200/IJPR/V24I10/PR300246.
  52. Song, S., Zhang, T. and Zhui, Z. (2023), "Dynamic analysis of nanotube-based nanodevices for drug delivery in sports-induced varied conditions applying the modified theories", Steel Compos. Struct., 49(5), 487. https://doi.org/10.12989/scs.2023.49.5.487.
  53. Su, Y., Shen, Z., Long, X., Chen, C., Qi, L. and Chao, X. (2023a), "Gaussian filtering method of evaluating the elastic/elastoplastic properties of sintered nanocomposites with quasicontinuous volume distribution", Mater. Sci. Eng. A, 872, 145001. https://doi.org/10.1016/j.msea.2023.145001.
  54. Su, Z., Meng, J. and Su, Y. (2023b), "Application of SiO2 nanocomposite ferroelectric material in preparation of trampoline net for physical exercise", Adv. Nano Res., 14(4), 355-362. https://doi.org/10.12989/anr.2023.14.4.355.
  55. Subie, A., Mouritz, A. and Troynikov, O. (2009), "Sustainable design and environmental impact of materials in sports products", Sports Technol., 2(3-4), 67-79. https://doi.org/10.1080/19346182.2009.9648504.
  56. Vinothkannan, M., Kim, A.R., Ramakrishnan, S., Yu, Y.T. and Yoo, D.J. (2021), "Advanced Nafion nanocomposite membrane embedded with unzipped and functionalized graphite nanofibers for high-temperature hydrogen-air fuel cell system: The impact of filler on power density, chemical durability and hydrogen permeability of membrane", Compos. Part B Eng., 215, 108828. https://doi.org/10.1016/j.compositesb.2021.108828.
  57. Viscusi, A., Antonucci, V., Carrino, L., Della Gatta, R., Lopresto, V., Papa, I., Perna, A.S., Ricciardi, M.R. and Astarita, A. (2020), "Manufacturing of an innovative composite structure: Design, manufacturing and impact behaviour", Compos. Struct., 250, 112637. https://doi.org/10.1016/j.compstruct.2020.112637.
  58. Wang, C., Guo, L., Xia, Y., Zhang, C., Sang, X., Xu, C., Zhu, G., Ji, H., Zhao, P., Fang, H., Peng, Z. and Zhang, X. (2024), "Flexural performance and damage evolution of multiple fiberglass-reinforced UV-CIPP composite materials-- A view from mechanics and energy release", J. Mater. Res. Technol., 29 3317-3339. https://doi.org/10.1016/j.jmrt.2024.02.051.
  59. Wang, G., Peng, K., Zhou, H., Liu, G., Lou, Z. and Pan, F. (2023a), "Nanocomposite reinforced structures to deal with injury in physical sports", Adv. Nano Res., 14(6), 541-555. https://doi.org/10.12989/anr.2023.14.6.541.
  60. Wang, J., Pan, Z., Wang, Y., Wang, L., Su, L., Cuiuri, D., Zhao, Y. and Li, H. (2020), "Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy", Additive Manuf., 34, 101240. https://doi.org/10.1016/j.addma.2020.101240.
  61. Wang, K., Boonpratatong, A., Chen, W., Ren, L., Wei, G., Qian, Z., Lu, X. and Zhao, D. (2023b), "The Fundamental Property of Human Leg During Walking: Linearity and Nonlinearity", IEEE T. Neural Syst. Rehabil. Eng., 31, 4871-4881. https://doi.org/10.1109/TNSRE.2023.3339801.
  62. Wang, M. and Feng, C. (2023), "Measuring capacity utilization under the constraints of energy consumption and CO2 emissions using meta-frontier DEA: A case of China's non-ferrous metal industries", Resources Policy, 80, 103278. https://doi.org/10.1016/j.resourpol.2022.103278.
  63. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  64. Wegierska, A.E., Charitos, I.A., Topi, S., Potenza, M.A., Montagnani, M. and Santacroce, L. (2022), "The connection between physical exercise and gut microbiota: Implications for competitive sports athletes", Sports Med., 52(10), 2355-2369. https://doi.org/10.1007/s40279-022-01696-x.
  65. Wu, S. and Luo, X. (2022), "Prevention and treatment of sports injuries and rehabilitative physical training of wushu athletes", Appl. Bionics Biomech., 2870385. https://doi.org/10.1155/2022/2870385.
  66. Wu, Y., Lu, S., Zhang, C., Wang, C. and Fang, H. (2024), "Unveiling the three-dimensional network and deformation mechanism of foamed polyurethane by coarse-grained and graph theory", J. Mater. Res. Technol., 29, 4650-4661. https://doi.org/10.1016/j.jmrt.2024.02.156.
  67. Xu, N., Liu, X., Li, Y., Zong, G. and Zhao, X. (2024), "Dynamic event-triggered control for a class of uncertain strict-feedback systems via an improved adaptive neural networks backstepping approach", IEEE T. Auto. Sci. Eng., 1-10. https://doi.org/10.1109/TASE.2024.3374522.
  68. Yan, C., Zhang, T., Zheng, T. and Mahmoudi, T. (2024), "Stability characteristic of bi-directional FG nano cylindrical imperfect composite: Improving the performance of sports bikes using carbon nanotubes", Steel Compos. Struct., 50(4), 459-474. https://doi.org/10.12989/scs.2024.50.4.459.
  69. Yang, B. (2022), "Application preparation of high-performance iron-based powder metallurgy sintered materials in sports industry", J. Nanomater., 9405590. https://doi.org/10.1155/2022/9405590.
  70. Yang, S., Huang, Z., Hu, Q., Zhang, Y., Wang, F., Wang, H. and Shu, Y. (2022a), "Proportional optimization model of multiscale spherical bn for enhancing thermal conductivity", ACS Appl. Electr. Mater., 4(9), 4659-4667. https://doi.org/10.1021/acsaelm.2c00878.
  71. Yang, S., Zhang, Y., Sha, Z., Huang, Z., Wang, H., Wang, F. and Li, J. (2022b), "Deterministic manipulation of heat flow via three-dimensional-printed thermal meta-materials for multiple protection of critical components", ACS Appl. Mater. Interf., 14(34), 39354-39363. https://doi.org/10.1021/acsami.2c09602.
  72. Yang, Y. and Mao, Y. (2023), "Effect of cross-section geometry on the stability performance of functionally graded cylindrical imperfect composite structures used in stadium construction", Geomech. Eng., 35(2), 181-194. https://doi.org/10.12989/gae.2023.35.2.181.
  73. Ye, M., HangKong, O., Lin, Y., Ynag, Q., Xu, Q., Chen, T., Sun, L. and Ma, L. (2023), "Electron transport properties of Y-type zigzag branched carbon nanotubes", Adv. Nano Res., 15(3), 263-275. https://doi.org/10.12989/.2023.15.3.263.
  74. Zhang, C., Liu, D., Liu, Q., Jiang, S., Wang, X., Wang, Y., Ma, C., Wu, A., Zhang, K. and Ma, Y. (2023a), "Magmatism and hydrocarbon accumulation in sedimentary basins: A review", Earth Sci. Rev., 244, 104531. https://doi.org/10.1016/j.earscirev.2023.104531.
  75. Zhang, C., Zhang, X., Santosh, M., Liu, D.D., Ma, C., Zeng, J.H., Jiang, S., Luo, Q., Kong, X.Y. and Liu, L.F. (2020), "Zircon Hf-O-Li isotopes of granitoids from the Central Asian Orogenic Belt: Implications for supercontinent evolution", Gondwana Res., 83, 132-140. https://doi.org/10.1016/j.gr.2020.02.003.
  76. Zhang, L. and Huang, Y. (2023), "Investigating the role of nano in preserving the environment with new energy and preventing oil pollution", Adv. Nano Res., 15(6), 541-550. https://doi.org/10.12989/anr.2023.15.6.541.
  77. Zhang, P., Song, J. and Mahmoudi, T. (2023b), "Simulation and modeling for stability analysis of functionally graded non-uniform pipes with porosity-dependent properties", Steel Compos. Struct., 48(2), 235-250. https://doi.org/10.12989/scs.2023.48.2.235.
  78. Zhang, P., Song, J. and Mahmoudi, T. (2023c), "Simulation and modeling for stability analysis of functionally graded non-uniform pipes with porosity-dependent properties", Steel Compos. Struct., 48(2), 235-250. https://doi.org/10.12989/scs.2023.48.2.235.
  79. Zhang, X., Li, J., Cui, Y., Habibi, M., Ali, H.E., Albaijan, I. and Mahmoudi, T. (2023d), "Static analysis of 2D-FG nonlocal porous tube using gradient strain theory and based on the first and higher-order beam theory", Steel Compos. Struct., 49(3), 293-306. https://doi.org/10.12989/scs.2023.49.3.293.
  80. Zhang, Z., Du, J. and Mahmoudi, T. (2023e), "Green synthesis of silver nanoparticles to the microbiological corrosion deterrence of oil and gas pipelines buried in the soil", Adv. Nano Res., 15(4), 355-366. https://doi.org/10.12989/anr.2023.15.4.355.
  81. Zhao, H., Zhao, N., Zong, G., Zhao, X. and Xu, N. (2024), "Sliding-mode surface-based approximate optimal control for nonlinear multiplayer Stackelberg-Nash games via adaptive dynamic programming", Commun. Nonlinear Sci. Numer. Simul., 132, 107928. https://doi.org/10.1016/j.cnsns.2024.107928.
  82. Zhao, S., Liang, W., Wang, K., Ren, L., Qian, Z., Chen, G., Lu, X., Zhao, D., Wang, X. and Ren, L. (2023), "A multiaxial bionic ankle based on series elastic actuation with a parallel spring", IEEE T Ind. Electr., 1-13. https://doi.org/10.1109/TIE.2023.3310041.
  83. Zhao, Y., Jing, J., Chen, L., Xu, F. and Hou, H. (2021), "Research progress on the interface of armor protective ceramic-metal laminated composite materials", Acta Metallurgica Sinica. 57(9), 1107-1125. https://doi.org/10.11900/0412.1961.2021.00051.
  84. Zhu, Q., Chen, J., Gou, G., Chen, H. and Li, P. (2017), "Ameliorated longitudinal critically refracted-Attenuation velocity method for welding residual stress measurement", J. Mater. Proc. Technol., 246, 267-275. https://doi.org/10.1016/j.jmatprotec.2017.03.022.