Computers and Concrete

  • 제33권4호
  • /
  • Pages.373-384
  • /
  • 2024
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear anchor behavior and design of an embedded concrete rack rail track for mountain trains

  • Hyeoung-Deok Lee (Department of Integrated Energy & Infra System, Kangwon National University) ;
  • Jong-Keol Song (Department of Civil Engineering, Kangwon National University) ;
  • Tae Sup Yun (School of Civil and Environmental Engineering, Yonsei University) ;
  • Seungjun Kim (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Jiho Moon (Department of Civil Engineering, Kangwon National University)
  • 투고 : 2023.10.16
  • 심사 : 2024.02.15
  • 발행 : 2024.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a novel mountain train system was developed that can run along a steep gradient of 180 ‰ and sharp curve with a minimum radius of 10 m. For this novel mountain train, an embedded precast concrete rack rail track was implemented to share the track with an automobile road and increase constructability in mountainous regions. The embedded rack rail track is connected to a hydraulically stabilized base (HSB) layer with shear anchors, which must have sufficient longitudinal resistance because they bear most of the traction forces originated from the rack rail and longitudinal loads owing to the steep gradient. In addition, the damage to the shear anchor parts, including the surrounding concrete, must be strictly limited under the service load because the maintenance of shear anchors inside the track is extremely difficult after installation. In this study, the focus was made on the shear anchor behavior and design an embedded rack rail track, considering the serviceability and ultimate limit states. Accordingly, the design loads for mountain trains were established, and the serviceability criteria of the anchor were proposed. Subsequently, the resistance and damage of the shear anchors were evaluated and analyzed based on the results of several finite element analyses. Finally, the design method of the shear anchors for the embedded rack rail track was established and verified.

키워드

과제정보

The research described in this study was financially supported by a Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure, and Transport (RS-2020-KA159279). This research was also supported by a National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (No. NRF-2021R1A5A1032433).

참고문헌

  1. ABAQUS (2021), Abaqus Analysis Guide 2021, Dassault Systems Simulia Corporation, Providence, RI, USA. 
  2. ACI 318 (2019), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute; Farmington Hills, MI, USA.
  3. CD 372 (2020), Design of Post-Installed Anchors and Reinforcing Bar Connections in Concrete (IAN 104/15), Highways England, Birmingham, UK. 
  4. DIN-Fachbericht 101 (2009), "Actions on bridges", Technical Report 101; Deutsches Institut fur Normung. Berlin, Germany. 
  5. Esveld, C. (2001), Modern Railway Track, 2nd Edition, MRT-Production, Delft, Netherlands. 
  6. ETAG 001 (2001), Metal Anchors for Use in Concrete-Annex C: Design Methods for Anchorages, European Organization for Technical Assessment, Brussels, Belgium. 
  7. Genikomsou, A.S. and Polak, M.A. (2015), "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS", Eng. Struct., 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016. 
  8. Guo, Y., Zhai, W., Sun, Y., Pei, G. and Jiang, J. (2017), "Mechanical characteristics of modern tramcar-embedded track system due to differential subgrade settlement", Aust. J. Struct. Eng., 18(3), 178-189. https://doi.org/10.1080/13287982.2017.1363990. 
  9. Korea Railway Research Institute (2019), "Development of traction system for steep gradient and sharp curve track final report", 17RTRP-B072165-05; Korea Agency for Infrastructure Technology Advancement, Seoul, Republic of Korea. 
  10. KR C-14040 (2021), Concrete Track Structure, Korea National Railway, Daejeon, Republic of Korea. 
  11. Ling, L., Han, J., Xiao, X. and Jin, X. (2017), "Dynamic behavior of an embedded rail track coupled with a tram vehicle", J. Vib. Control, 23(14), 2355-2372. https://doi.org/10.1177/1077546315616521. 
  12. Ludvigh, E. (2002), "Elastic behavior of continuously embedded rail systems", Period. Polytech. Civil Eng., 46(1), 103-114. 
  13. Oehlers, D.J. and Coughlan, C.G. (1986), "The shear stiffness of stud shear connections in composite beams", J. Constr. Steel Res., 6(4), 273-284. https://doi.org/10.1016/0143-974X(86)90008-8. 
  14. Pyrgidis, C.N. (2016), Railway Transportation Systems: Design, Construction and Operation, Taylor & Francis Group, Boca Raton, FL, USA. 
  15. Seo, S.B. (2009), Fundamentals of Track Dynamics 2, Book Gallery, Seoul, Republic of Korea. 
  16. Seo, S.I. and Mun, H.S. (2019) "Development of technologies for mountain trams driven through sharp curves", J. Mech. Sci. Technol., 33, 2019-2027. https://doi.org/10.1007/s12206-019-0404-0. 
  17. Seo, S.I., Mun, H.S., Suk, M.E. and Moon, J. (2018), "Development of a bogie for running on steep gradient and sharp curve track", J. Rail Rapid Transits, 232(4), 1121-1134. https://doi.org/10.1177/0954409717709108. 
  18. Son, S.H., Kim, D.Y., Son, K.Y. and Kim, S.K. (2020), "Predicting production time of free-form concrete panels using 3D plastering technology", Autom. Constr., 119, 103327. https://doi.org/10.1016/j.autcon.2020.103327. 
  19. Syed, M., Moeini, M., Okumus, P., Elhami-Khorasani, N., Ross, B.E. and Kleiss, MCB. (2021), "Analytical study of tessellated structural-architectural reinforced concrete shear walls", Eng. Struct., 244, 112768. https://doi.org/10.1016/j.engstruct.2021.112768. 
  20. Wang, Y.C. (1998), "Deflection of steel-concrete composite beams with partial shear interaction", J. Struct. Eng., 124(10), 1159-1165. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1159). 
  21. Wosatko, A., Winnicki, A., Polak, M.A. and Pamin, J. (2019), "Role of dilatancy angle in plasticity-based models of concrete", Arch. Civil Mech. Eng., 19(4), 1268-1283. https://doi.org/10.1016/j.acme.2019.07.003.