Wind and Structures

  • 제38권3호
  • /
  • Pages.203-214
  • /
  • 2024
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Aerodynamic mitigation of wind loads on a large-span cantilevered roof: A combined wind tunnel and CFD analysis

  • Chen Fubin (School of Civil Engineering, Changsha University of Science and Technology) ;
  • Wang Weijia (School of Civil Engineering, Changsha University of Science and Technology) ;
  • Yang Danqing (School of Civil Engineering, Changsha University of Science and Technology) ;
  • Zhenru Shu (School of Civil Engineering, Central South University)
  • 투고 : 2023.04.19
  • 심사 : 2024.02.10
  • 발행 : 2024.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Large-span cantilevered roof represents a unique type of structure that is vulnerable to wind loads. Inspired by the need to maximumly reducing the rooftop wind loads, this study examined the feasibility of positioning vented slots on the leading edge, and the effectiveness of such aerodynamic mitigation measures are assessed via both physical and numerical simulations. The reliability of numerical simulation was evaluated via comparisons with the wind tunnel tests. The results indicated that, the variation of venting hole arrangement can cause significant change in the rooftop wind load characteristics. For the cases involved in this study, the maximum reduction of mean and peak wind suction coefficients are found to be 9% and 8% as compared to the original circular slot without venting holes. In addition, the effect of slot shape is also evident. It was shown that the triangular shaped slot tends to increase the wind suction near the leading edge, whereas the hexagonal and octagonal shaped slots are found to decrease the wind suction. In particular, with the installation of octagonal shaped slot, the maximum reduction of wind suction coefficients near the leading edge reaches up to 31% as compared to the circular shaped slot, while the maximum reduction of mean wind suction coefficients is about 30%.

키워드

과제정보

This project was funded by National Natural Science Foundation of China (Project No: 52278479 and 51778072).

참고문헌

  1. Abdelfatah, N., Elawady, A., Irwin, P. and Chowdhury, A.G. (2022), "Experimental investigation of wind impact on low-rise elevated residences", Eng. Struct., 257, 114096.
  2. Aly, A.M. and Bresowar, J. (2016), "Aerodynamic mitigation of wind-induced uplift forces on low-rise buildings: A comparative study", J. Build. Eng., 5, 267-276. https://doi.org/10.1016/j.jobe.2016.01.007
  3. Apperley, L.W. and Pitsis, N.G. (1986), "Model/full-scale pressure measurements on a grandstand", J. Wind Eng. Ind. Aerod., 23, 99-111. https://doi.org/10.1016/0167-6105(86)90035-8
  4. Barnard, R.H. (1981), "Wind loads on cantilevered roof structures", J. Wind Eng. Ind. Aerod., 8(1-2), 21-30. https://doi.org/10.1016/0167-6105(81)90004-0
  5. Blessing, C., Chowdhury, A.G., Lin, J. and Huang, P. (2009), "Full-scale validation of vortex suppression techniques for mitigation of roof uplift", Eng. Struct., 31(12), 2936-2946. https://doi.org/10.1016/j.engstruct.2009.07.021
  6. Chen J., Kang L. and Guo M. (2022), "Study on wind-resistant aerodynamic measures of multi-arch long-span cantilever roof", Quarter. J. Mech., 43(02), 372-381. (in Chinese)
  7. Chen, F., Wang, W., Zhou, J., Shu, Z. and Li, Q. (2021), "Experimental investigation of wind pressure characteristics and aerodynamic optimization of a large-span cantilevered roof", Structures, 34, 303-313. https://doi.org/10.1016/j.istruc.2021.07.034
  8. Cochran, L.S. and English, E.C. (1997), "Reduction of roof wind loads by architectural features", Architect. Sci. Rev., 40(3), 79-87. https://doi.org/10.1080/00038628.1997.9697388
  9. Cook, N.J. (1990), The Designer's Guide to Wind Loading of building structures. Vol. 2: Static structures. Building Research Establishment Report.
  10. Fu, J.Y., Li, Q.S. and Xie, Z.N. (2005), "Wind effects on a large cantilevered flat roof: loading characteristics and strategy of reduction", Wind Struct., 8(5), 357-372. https://doi.org/10.12989/was.2005.8.5.357
  11. GB 50009-2012, (2012), Load Code for the Design of Building Structures. China Architecture and Building Press; Beijing, China (in Chinese).
  12. Irtaza, H. and Agarwal, A. (2018), "CFD simulation of turbulent wind effect on an array of ground-mounted solar PV panels", J. Institution Eng. (India): Series A, 99, 205-218. https://doi.org/10.1007/s40030-018-0283-x
  13. Jafari, M. and Alipour, A. (2021), "Aerodynamic shape optimization of rectangular and elliptical double-skin facades to mitigate wind-induced effects on tall building", J. Wind Eng. Ind. Aerod., 213, 104586.
  14. Karrar, W.S., Shyama, A.M. and Jassim, M. (2020), "High-rise building wind analysis using computational fluid dynamics and dynamic analysis using etabs program", Int. J., 8(7).
  15. Kawai, H., Yoshie, R., Wei, R. and Shimura, M. (1999), "Wind-induced response of a large cantilevered roof", J. Wind Eng. Ind. Aerod., 83(1-3), 263-275. https://doi.org/10.1016/S0167-6105(99)00077-X
  16. Killen, G.P. and Letchford, C.W. (2001), "A parametric study of wind loads on grandstand roofs", Eng. Struct., 23(6), 725-735. https://doi.org/10.1016/S0141-0296(00)00069-9
  17. Killen, G.P. and Letchford, C.W. (2001), "A parametric study of wind loads on grandstand roofs", Eng. Struct., 23(6), 725-735. https://doi.org/10.1016/S0141-0296(00)00069-9
  18. Kopp, G.A. and Morrison, M.J. (2018), "Component and cladding wind loads for low-slope roofs on low-rise building", J. Struct. Eng., 144(4), 04018019.
  19. Lam, K.M. and To, A.P. (1995), "Generation of wind loads on a horizontal grandstand roof of large aspect ratio", J. Wind Eng. Ind. Aerod., 54, 345-357.
  20. Lam, K.M. and Zhao, J.G. (2002), "Occurrence of peak lifting actions on a large horizontal cantilevered roof", J. Wind Eng. Ind. Aerod., 90(8), 897-940. https://doi.org/10.1016/S0167-6105(02)00212-X
  21. Lam, K.M. and Zhao, J.G. (2002), "Occurrence of peak lifting actions on a large horizontal cantilevered roof", J. Wind Eng. Ind. Aerod., 90(8), 897-940. https://doi.org/10.1016/S0167-6105(02)00212-X
  22. Launder, B.E. and Spalding, D.B. (1983), The Numerical Computation of Turbulent Flows. In Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion, 96-116, Pergamon.
  23. lDegwy, A., Elsayed, A. and Darwish, M. (2022), "Aerodynamics of ancient egyptian Obelisks and their structural response to Boundary Layer wind", Environ. Fluid Mech., 22(5), 1035-1053. https://doi.org/10.1007/s10652-022-09877-y
  24. Letchford, C.W. and Killen, G.P. (2002), "Equivalent static wind loads for cantilevered grandstand roofs", Eng. Struct., 24(2), 207-217. https://doi.org/10.1016/S0141-0296(01)00085-2
  25. Li, Y., Li, S.Q. and Zeng, L.W. (2019), "Control of the VIV of a cantilevered square cylinder with free-end suctio", Wind Struct., 29(1), 75-84.
  26. Lin, J.X. and Surry, D. (1993), "Suppressing extreme suction on low buildings by modifying the roof corner geometry", 7th US National Conf. on Wind Eng, NewYork, June.
  27. Liu, T.T., Zhang, H.F. and Xin, D.B. (2021), "Experimental study on mitigating extreme roof suctions by passive vortex generators", J. Wind Eng. Ind. Aerod., 219, 104807.
  28. Melbourne, W. H. and Cheung, J.C.K. (1988), "Reducing the wind loading on large cantilevered roofs", Adv. Wind Eng., 1988, 401-410. https://doi.org/10.1016/B978-0-444-87156-5.50051-5
  29. Moorjani, R.R., Lombardo, F.T., Devin, A.F., Yong, B.S., Baker, W.F. and Ray, S.D. (2021), "Influence of vented floors on the across-wind response of tall building", J. Wind Eng. Ind. Aerod., 209, 104480.
  30. Oliveira, P.J. and Younis, B.A. (2000), "On the prediction of turbulent flows around full-scale buildings", J. Wind Eng. Ind. Aerod., 86(2-3), 203-220. https://doi.org/10.1016/S0167-6105(00)00011-8
  31. Qiu, Y., Yu, R., San, B.B. and Li, J.H. (2022), "Aerodynamic shape optimization of large-span coal sheds for wind-induced effect mitigation using surrogate models", Eng. Struct., 253, 113818.
  32. Richards, P.J., Hoxey, R.P. and Shor L.J. (2001), "Wind pressures on a 6m cube", J. Wind Eng. Ind. Aerod., 89, 1553-1564. https://doi.org/10.1016/S0167-6105(01)00139-8
  33. Saeed, K.W., Muttaleb, S.A. and Muhsin, J. (2020), "Comparing of wind pressure of a high-rise building in Baghdad City between wind tunnel and CFD results", Simulation, 5(01), 01-10. https://doi.org/10.1186/s41077-019-0117-6
  34. Sagol, E., Reggio, M. and Ilinca, A. (2012), "Assessment of two-equation turbulence models and validation of the performance characteristics of an experimental wind turbine by CFD", Int. Scholarly Res. Notices, 2012.
  35. Sharmaa, D., Palb, S. and Raj, R. (2023), "Numerical prediction of the proximity effects on wind loads of low-rise buildings with cylindrical roof", Wind Struct., 36(4), 277-292.
  36. Tu, Z., Zheng, G., Yao, J., Shen, G. and Lou, W. (2022), "Computational investigation of wind loads on tilted roof-mounted solar array", Sustainability, 14(23), 15653.
  37. Versteeg, H.K. and Malalasekera, W. (1995), An Introduction to Computational FluidDynamics: The Finite Volume Method. UK London: Longman Group Ltd, London, UK.
  38. Yagmur, S., Dogan, S., Aksoy, M.H. and Goktepeli, I. (2020), "Turbulence modeling approaches on unsteady flow structures around a semi-circular cylinder", Ocean Eng., 200, 107051.
  39. Yang, W., Luo, J. and Du, Y. (2022), "Aerodynamic optimization of wind-resistant performance of outdoor large-scale three-sided single-column billboards", J. Lanzhou Univ. Technol., 48(1), 143-149. (in Chinese)
  40. Zhao, J.G. and Lam, K.M. (2002), "Characteristics of wind pressures on large cantilevered roofs: effect of roof inclination", J. Wind Eng. Ind. Aerod., 90(12-15), 1867-1880. https://doi.org/10.1016/S0167-6105(02)00294-5