Structural Engineering and Mechanics

  • 제89권4호
  • /
  • Pages.363-374
  • /
  • 2024
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modified models predicting punching capacity of edge column-slab joints considering different codes

  • Hamdy A. Elgohary (Civil Engineering Department, College of Engineering and Architecture, Umm Al-Qura University) ;
  • Mohamed A. El Zareef (Civil Engineering Department, College of Engineering and Architecture, Umm Al-Qura University)
  • 투고 : 2022.05.16
  • 심사 : 2024.02.05
  • 발행 : 2024.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Significant changes have been made to estimate the punching shear capacity for edge column-slab joints in the latest editions of most current codes. The revised equations account for axial forces as well as moments conveyed to columns from slabs, which have a substantial impact on the punching resistance of such joints. Many key design parameters, such as reinforcement-ratio, concrete strength, size-effect, and critical-section perimeter, were treated differently or even ignored in various code provisions. Consequently, wide ranges of predicted punching shear strength were detected by applying different code formulas. Therefore, it is essential to assess the various current Codes' design-equations. Because of the similarity in estimated outcomes, only the ACI, EC, and SNiP are used in this study to cover a wide range of estimation ranges from highly conservative to unconservative. This paper is devoted to analyzing the techniques in these code provisions, comparing the estimated punching resistance with available experimental data, and finally developing efficient models predicting the punching capacity of edge column-slab connections. 63 samples from past investigations were chosen for validation. To appropriately predict the punching shear, newly updated equations for ACI and SNiP are provided based on nonlinear regression analysis. The proposed equations'results match the experimental data quite well.

키워드

참고문헌

  1. ACI Committee 318 (2014), Building Code Requirements for Structural Concrete and Commentary (ACI 318R-14), American Concrete Institute, Farmington Hills, MI, USA.
  2. ACI Committee 318 (2019), Building Code Requirements for Structural Concrete and Commentary (ACI 318R-19), American Concrete Institute, Farmington Hills, MI, USA.
  3. Albuquerque, N.G.B., Guilherme, S.M. and Robert, L.V. (2016), "Punching shear strength of flat slab edge column connections with outward eccentricity of loading", ACI Struct. J., 113(5), 1117-1129. https://doi.org/10.14359/51689156.
  4. Alvarado, Y.A., Torres, B., Buitrago, M., Ruiz, D.M., Torres, S.Y. and Alvarez, R.A. (2022), "Dynamic punching shear tests of flat slab-column joints with 5D steel fibers", Struct. Eng. Mech., 81(3), 281-292. https://doi.org/10.12989/sem.2022.81.3.281.
  5. Aslani, F., Lino Maia, L. and Santos, J. (2017), "Effect of specimen geometry and specimen preparation on the concrete compressive strength test", Struct. Eng. Mech., 62(1), 1-12. https://doi.org/10.12989/sem.2017.62.1.097.
  6. Ben-Sasi, O.M. (2013), "Behavior and strength of slab-edge beam-column connections under shear force and moment", Eng. Technol. Int. J. Civil Environ. Eng., 7(9), 679-684. https://doi.org/10.5281/zenodo.1335670.
  7. Broms, C.E. (2016), "Tangential strain theory for punching failure of flat slabs", ACI Struct. J., 113(1), 95-104. https://doi.org/10.14359/51687942.
  8. CEB-FIP Model Code (1990), Design Code, Committee Euro-International de Beton Bulletin D'Information, No. 203-305, Thomas Telford Publishing, Lausanne, Switzerland.
  9. Deema, A.S., Robert, L.V. and Lorenzo, M. (2021), "Modelling punching shear failure at edge slab-column connections by means of nonlinear joint elements", Struct., 34, 630-652. https://doi.org/10.1016/j.istruc.2021.07.092.
  10. Derogar, S., Ince, C. and Mandal, P. (2018), "Development and evaluation of punching shear database for flat slab-column connections without shear reinforcement", Struct. Eng. Mech., 66(2), 203-215. https://doi.org/10.12989/sem.2018.66.2.203.
  11. Egyptian Code of Practice, ECP-203 (2017), Design and Construction of Concrete Structures, Housing and Building Research Centre, Cairo, Egypt.
  12. Einpaul, J., Robert, V. and Antonio R. (2017), "Punching shear behaviour of edge column connections in continuous flat slabs", IABSE Symposium: Engineering the Future, Vancouver, September.
  13. El Zareef, M.A., Abdulrahaman, A.G. and Alnemari, A. (2023), "Experimental investigation of punching shear behaviour of ultra-high performance self-compacting concrete slabs", Case Stud. Constr. Mater., 19, e02307. https://doi.org/10.1016/j.cscm.2023.e02307
  14. El-Salakawy, E.F., Polak, M.A. and Soliman, M.H. (1998), "Reinforced concrete slab-column edge connections with shear studs", Can. J. Civil Eng., 27(2), 338-348. https://doi.org/10.1139/l99-062.
  15. Eurocode 2 (2004), Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings, British Standard Institution, London.
  16. Ferreira, M.D.P., Oliveira, M.H. and Melo, S.A.G.S. (2019), "Tests on the punching resistance of flat slabs with unbalanced moments", Eng. Struct., 196, 109311. https://doi.org/10.1016/j.engstruct.2019.109311.
  17. FIB Bulletin 12 (2001), Punching of Structural Concrete Slabs: Technical Report, Fib Federation Internationale du Beton.
  18. Fib Model Code for Concrete Structures (2010).
  19. Garnica, Z.G. (2018), "Analysis of Shear Transfer Mechanisms in Concrete Members without shear reinforcement based on kinematic measurements", Master Thesis, TU Delft, Civil Engineering and Geosciences, Netherland.
  20. Genikomsou, A.S. and Polak, M.A. (2015), "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS", Eng. Struct., 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016.
  21. Hafidi, M., Kharchi, F. and Lefkir, A. (2013), "Neuro-fuzzy optimisation to model the phenomenon of failure by punching of a slab-column connection without shear reinforcement", Struct. Eng. Mech., 47(5), 679-700. https://doi.org/10.12989/sem.2013.47.5.679.
  22. Hawkins, N.M., Fallsen, H.B. and Hinojosa, R.C. (1971), "Influence of column rectangularity on the behavior of flat plate structures", Spec. Publ., 30, 127-146. https://doi.org/10.14359/17493.
  23. Hawkins, N.M., Wong, C.F. and Yang, C.H. (1974), "Slab-edge column connections transferring high intensity reversing moments normal to the edge of the slab", Structures and Mechanics, Report No. SM78-1, Department of Civil Engineering, University of Washington, Seattle, WA.
  24. Ibrahim, A., El-Metwally, S.E., Asker, H.H. and El Zareef, M.A. (2016), "Effect of mid-thickness rebar mesh on the behavior and punching shear strength of interior slab-column connection", HBRC J., 12(3), 272-283. https://doi.org/10.1016/j.hbrcj.2014.12.003.
  25. Inman, H. and Bradley, E.J. (1989), "The overlapping coefficient as a measure of agreement between probability distributions and point estimation of the overlap of two normal densities, communications in statistics", Theor. Meth., 18(10), 3851-3874. https://doi.org/10.1080/03610928908830127.
  26. Joint ASCE-ACI Task Committee 426 on Shear and Diagonal Tension of the Committee on Masonry and Reinforced Concrete of the Structural Division (1974), "The shear strength of reinforced concrete members-slabs", J. Struct. Div., 100(8), 1543-1591. https://doi.org/10.1061/jsdeag.0003838.
  27. Kane, K.A. (1978), "Some model tests on the punching action of reinforced concrete slabs at edge columns", Honors Project, Queen's University Belfast, Northern Ireland.
  28. Methodological Manual for SP 63.13330.2012 (2015), Design of Reinforced Concrete Structures, Basic Provisions, updated Editorial of SNiP 52-01-2003, Ministry of Regional Development, Russian Federation, Moscow.
  29. Moehle, J.P. (1988), "Strength of slab-column edge connections", ACI Struct. J., 85(1), 89-98. https://doi.org/10.14359/2995.
  30. Mortin, J.D. and Ghali, A. (1991), "Connection of flat plates to edge columns", ACI Struct. J., 88(2), 191-198. https://doi.org/10.14359/2683.
  31. Nayra L.A.M. and Caio G.N. (2021), "Probabilistic analysis of slab-column connections subjected to punching shear according to the ABNT NBR 6118 (2014) recommendations considering the model error measure", IBRACON Struct. Mater. J., 14(6), e14609. https://doi.org/10.1590/S1983-41952021000600009.
  32. Nilson, A.H., Darwin, D. and Dolan, C.W. (2010), Design of Concrete Structures, 15th Edition, McGraw-Hill.
  33. Regan, P.E. (1993), "Tests of connections between flat slabs and edge columns", School of Architecture and Engineering, University of Westminster, London, UK.
  34. Regan, P.E., Walker, P.R. and Zakaria, K.A.A. (1981), "Test of reinforced concrete flat slabs", CIRIA Project RP 220, School of the Environment Polytechnic of Central London, London, UK.
  35. Russian Code, SNiP 52-01-2003 (2012), Concrete and Reinforced Concrete Structures, Basic Provisions, Ministry of Regional Development, Russian Federation, Moscow.
  36. Saudi Building Code, SBC 304 (2018), The Saudi Building Cod for Concrete Structures Code Requirements and Commentaries, KSA.
  37. Scavuzzo, L. (1978), "Shear reinforcement of slab-column connections of reinforced concrete flat plate structures", The Royal Military College, Kingston, Ontario. https://doi.org/10.14359/10877.
  38. Sherif, A., Emara, M.B., Hassanein, A. and AbulMagd, S. (2005), "Effect of the column dimensions on the punching shear strength of edge column-slab connections", American Concrete Institute, Farmington Hills, MI, USA, ACI Special Publication 232, Punching Shear in Reinforced Concrete Slabs, 175-192.
  39. Sherif, A.G. and Dilger, W.H. (2000), "Tests of full-scale continuous reinforced concrete flat slabs", ACI Struct. J., 97(3), 455-467. https://doi.org/10.14359/4640.
  40. Stamenkovic, A. and Chapman, J.C. (1972), "Local strength of flat slabs at column heads", Report 39, Construction Industry Research and Information Association, London, UK.
  41. Sudarsana, K. and Gardner, N.J. (2006), "Punching shear in edge column slab connections of flat plate structures", Procceding of 2nd Asian Concrete Federation Conference, Bali, Indonesia.
  42. Sudarsana, K., Gegiranang, W.G. and Adi Susila, G. (2022), "Finite element analysis of punching shear-unbalanced moment interactions at edge column-flat plate connections", J. Appl. Eng. Sci., 20(1), 91-100. https://doi.org/10.5937/jaes0-31703.
  43. Vanderbilt, M.D. (1972), "Shear strength of continuous plates", J. Struct. Div., 98(ST5), 961-973. https://doi.org/10.1061/jsdeag.0003248.
  44. Zaghlool, E.R.F. (1971), "Strength and behavior of corner and edge column slab connections in reinforced concrete flat plated", PhD. Thesis, University of Calgary, Calgary, Alberta, Canada.