과제정보
이 논문은 조선대학교 학술연구비의 지원을 받아 연구되었음(2022).
참고문헌
- B. Dai, K. Nakamura, Y. Suzuki, Y Tachiya, and K. Kuritani, "Dynamic Simulation Method of a Magnetic Gear Using its Torque Map," IEEE Transactions on Magnetics, vol. 58, no. 8, Aug. 2022, pp. 1-5. https://doi.org/10.1109/TMAG.2022.3159002
- E. Park, S. Kim, S. Jung, and Y. Kim, "Novel pole piece optimal design of cost reduction type magnetic gear by central composite design,"2016 XXII International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 2016, pp. 1922-1927.
- L. Shah, A. Cruden, and W. Williams, "A Variable Speed Magnetic Gear Box Using Contra-Rotating Input Shaft,"IEEE Transaction on Magnetics, vol. 47, no. 2, Feb. 2011, pp. 431-438 https://doi.org/10.1109/TMAG.2010.2097273
- X. Yin, P.-D. Pfister, and Y. Fang, "Novel Magnetic Gear: Toward a Higher Torque Density," IEEE Transactions on Magnetics, vol. 51, no. 4, Nov. 2015, pp. 1-4. https://doi.org/10.1109/TMAG.2015.2436058
- K. Atallah and D. Howe, "A novel high-performance magnetic gear," IEEE Trans. Magnetics, vol. 37, no. 4, July 2001, pp. 2844-2845. https://doi.org/10.1109/20.951324
- Y. Hu, L. Li, B. Chen, Y. Xiao, M. Liu, and X. Ma, "Optimized Design of Magnetic Gear with High Torque Density and Permanent Magnet Utilization,"International Conference on Electrical Machines and Systems(ICEMS), 2021, pp. 1167-1171.
- E. Park and Y. Kim, "Multi-gear Combination Analysis for High Gear Ratio of Coaxial Magnetic Gear,"J. of the Korea Institute of Electronic Communication Sciences, vol. 16 no. 2, 2021, pp. 355-362.
- B. Byeon, E. Park, S. Jung, and Y. Kim, "Analysis of air gap magnetic flux density to improve output of electromagnet magnetic gear with gear ration conversion,"In proc. korean Institute Electrical Engineers, Int. Conf. Communications, Jeju, Korea, May 2023, pp. 187-188.
- C. Kim, E. Park, S. Kim, and Y. Kim, "An Study on Pole Piece Shape for Improving Torque Ripple of Magnetic Gears,"J. of the Korea Institute of Electronic Communication Sciences, vol. 12 no. 6, 2017, pp. 1065-1070.
- B. Byeon, E. Park, and Y. Kim, "Application of Permanent Magnets with Different Magnetization in Magnetic Gear Considering Gear Ratio Conversion,"The transactions of The Korean Institute of Electrical Engineers, vol. 72, no. 11, Nov 2023, pp. 1366-1371. https://doi.org/10.5370/KIEE.2023.72.11.1366
- E. Park and Y. Kim, "Torque Ripple Improving and Analysis of Coil-winding Rotor of Magnetic Gear,"J. of the Korea Institute of Electronic Communication Sciences, vol. 15, no. 2, 2020, pp. 1065-1070.
- H. Lee, H. Jeong, and S. Cho, "A Study on Design and Manufacture of Slotless Outer Rotor BLDC Motor for a Vehicle Blower,"J. of the Korea Institute of Electronic Communication Sciences, vol. 18, no. 5, 2023, pp. 827-834.