DOI QR코드

DOI QR Code

Stability of an improved optimization iterative algorithm to study vibrations of the multi-scale solar cells subjected to wind excitation using Series-Fourier algorithm

  • Jing Pan (Department of Materials and Chemical Engineering, Taiyuan University) ;
  • Yi Hu (Department of Materials and Chemical Engineering, Taiyuan University) ;
  • Guanghua Zhang (Department of Intelligence and Automation, Taiyuan University)
  • Received : 2020.07.13
  • Accepted : 2023.09.22
  • Published : 2024.01.10

Abstract

This research explores the domain of organic solar cells, a photovoltaic technology employing organic electronics, which encompasses small organic molecules and conductive polymers for efficient light absorption and charge transport, leading to electricity generation from sunlight. A computer simulation is employed to scrutinize resonance and dynamic stability in OSCs, with a focus on size effects introduced by nonlocal strain gradient theory, incorporating additional terms in the governing equations related to displacement and time. Initially, the Navier method serves as an analytical solver to delve into the dynamics of design points. The accuracy of this initial step is verified through a meticulous comparison with high-quality literature. The findings underscore the substantial impact of viscoelastic foundations, size-dependent parameters, and geometric factors on the stability and dynamic deflection of OSCs, with a noteworthy emphasis on the amplified influence of size-dependent parameters in higher values of the different layers' thicknesses.

Keywords

Acknowledgement

This work was supported by the Fund for Shanxi"1331 Project"and Shanxi Province Science Foundation for Youths (Grant No. 202103021223008) and Educational Commission of Shanxi Province of China (Grant No. J2021770) and Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxi (Grant No.2021L574) and Teaching reform and innovation project of colleges and universities in Shanxi Province (Grant No. J2021770).

References

  1. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., AlFurjan, M. and Chen, G. (2020), "Critical Temperature and Frequency Characteristics of GPLs-Reinforced Composite Doubly Curved Panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  2. Akgoz, B. and Civalek, O . (2011), "Strain gradient elasticity and modified couple stress models for buckling analysis of axially loaded micro-scaled beams", Int. J. Eng. Sci., 49(11), 1268-1280. https://doi.org/10.1016/j.ijengsci.2010.12.009.
  3. Al-Furjan, M., Alzahrani, B., Shan, L., Habibi, M. and Jung, D.W. (2020a), "Nonlinear forced vibrations of nanocomposite-reinforced viscoelastic thick annular system under hygrothermal environment", Mech. Based Des. Struct. Machines. 1-27. https://doi.org/10.1080/15397734.2020.1824795.
  4. Al-Furjan, M., Bolandi, S.Y., Habibi, M., Ebrahimi, F., Chen, G. and Safarpour, H. (2021a), "Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01255-w.
  5. Al-Furjan, M., Bolandi, S.Y., Shan, L., Habibi, M. and Jung, D.w. (2020b), "On the vibrations of a high-speed rotating multi-hybrid nanocomposite reinforced cantilevered microdisk", Mech. Based Des. Struct. Machines. 1-29. https://doi.org/10.1080/15397734.2020.1828098.
  6. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and Won Jung, D. (2020c), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  7. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020d), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  8. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and Won Jung, D. (2020e), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  9. Al-Furjan, M., Habibi, M., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2020f), "Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM", Compos. Struct., 252, 112737. https://doi.org/10.1016/j.compstruct.2020.112737.
  10. Al-Furjan, M., Habibi, M., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2020g), "Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM", Eng. Comput., 1-24.
  11. Al-Furjan, M., Habibi, M., Ebrahimi, F., Chen, G., Safarpour, M. and Safarpour, H. (2020h), "A coupled thermomechanics approach for frequency information of electrically composite microshell using heat-transfer continuum problem", Europ. Phys. J. Plus. 135(10), 1-45. https://doi.org/10.1140/epjp/s13360-020-00764-3.
  12. Al-Furjan, M., Habibi, M., Ebrahimi, F., Mohammadi, K. and Safarpour, H. (2020i), "Wave dispersion characteristics of high-speed-rotating laminated nanocomposite cylindrical shells based on four continuum mechanics theories", Waves Random Complex Media. 1-27. https://doi.org/10.1080/17455030.2020.1831099.
  13. Al-Furjan, M., Habibi, M., Ni, J., won Jung, D. and Tounsi, A. (2020j), "Frequency simulation of viscoelastic multi-phase reinforced fully symmetric systems", Eng. Comput., 1-17.
  14. Al-Furjan, M., Habibi, M. and Safarpour, H. (2020k), "Vibration control of a smart shell reinforced by graphene nanoplatelets", Int. J. Appl. Mech., 12(06), 2050066. https://doi.org/10.1142/S1758825120500660.
  15. Al-Furjan, M., Habibi, M., Shan, L. and Tounsi, A. (2020l), "On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method", Compos. Struct., 113150. https://doi.org/10.1016/j.compstruct.2020.113150.
  16. Al-Furjan, M., Habibi, M., won Jung, D., Chen, G., Safarpour, M. and Safarpour, H. (2020m), "Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doubly-curved panel", Europ. J. Mech.-A/Solids. 85, 104091. https://doi.org/10.1016/j.euromechsol.2020.104091.
  17. Al-Furjan, M., Habibi, M., won Jung, D., Sadeghi, S., Safarpour, H., Tounsi, A. and Chen, G. (2020n), "A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-020-01130-8.
  18. Al-Furjan, M., Habibi, M., Won Jung, D. and Safarpour, H. (2020o), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  19. Al-Furjan, M., Habibi, M., Won Jung, D., Safarpour, H. and Safarpour, M. (2020p), "On the buckling of the polymer-CNT-fiber nanocomposite annular system under thermo-mechanical loads", Mech. Based Des. Struct. Machines. 1-21. https://doi.org/10.1080/15397734.2020.1830106.
  20. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020q), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin-Wall. Struct., 107242. https://doi.org/10.1016/j.tws.2020.107242.
  21. Al-Furjan, M., Mohammadgholiha, M., Alarifi, I.M., Habibi, M. and Safarpour, H. (2020r), "On the phase velocity simulation of the multi curved viscoelastic system via an exact solution framework", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-020-01152-2.
  22. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020s), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin-Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  23. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020t), "Wave propagation simulation in an electrically open shell reinforced with multi-phase nanocomposites", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-020-01167-9.
  24. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H., Jung, D.W. and Tounsi, A. (2020u), "On the wave propagation of the multi-scale hybrid nanocomposite doubly curved viscoelastic panel", Compos. Struct., 112947. https://doi.org/10.1016/j.compstruct.2020.112947.
  25. Al-Furjan, M., Safarpour, H., Habibi, M., Safarpour, M. and Tounsi, A. (2020v), "A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method", Eng. Comput., 1-18.
  26. Al-Furjan, M., Samimi-Sohrforozani, E., Habibi, M., Won Jung, D. and Safarpour, H. (2021b), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  27. Al-Furjan, M.S.H., Dehini, R., Khorami, M., Habibi, M. and Won Jung, D. (2021c), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  28. Al-Furjan, M.S.H., Dehini, R., Paknahad, M., Habibi, M. and Safarpour, H. (2021d), "On the nonlinear dynamics of the multiscale hybrid nanocomposite-reinforced annular plate under hygro-thermal environment", Archiv. Civil Mech. Eng., 21(1), 4. https://doi.org/10.1007/s43452-020-00151-w.
  29. Al-Furjan, M.S.H., Habibi, M., Ebrahimi, F., Mohammadi, K. and Safarpour, H. (2020w), "Wave dispersion characteristics of high-speed-rotating laminated nanocomposite cylindrical shells based on four continuum mechanics theories", Waves Random Complex Media. 1-27. https://doi.org/10.1080/17455030.2020.1831099.
  30. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct. Machines. 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  31. Anh, V.M., Quan, T.Q. and Tran, P. (2021), "Nonlinear vibration and geometric optimization of nanocomposite multilayer organic solar cell under wind loading", Thin-Wall. Struct., 158 107199. https://doi.org/10.1016/j.tws.2020.107199.
  32. Aria, A.I. and Biglari, H. (2018), "Computational vibration and buckling analysis of microtubule bundles based on nonlocal strain gradient theory", Appl. Mathem. Comput., 321 313-332. https://doi.org/10.1016/j.amc.2017.10.050
  33. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  34. Cao, Y., Miraba, S., Rafiei, S., Ghabussi, A., Bokaei, F., Baharom, S., Haramipour, P. and Assilzadeh, H. (2020), "Economic application of structural health monitoring and internet of things in efficiency of building information modeling", Smart Struct. Syst., 26(5), 559-573. https://doi.org/10.12989/sss.2020.26.5.559.
  35. Chen, D., Wang, Q., Li, Y., Li, Y., Zhou, H. and Fan, Y. (2020), "A general linear free energy relationship for predicting partition coefficients of neutral organic compounds", Chemosphere. 247, 125869. https://doi.org/10.1016/j.chemosphere.2020.125869.
  36. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  37. Chen, H., Wu, H., Kan, T., Zhang, J. and Li, H. (2023), "Low-carbon economic dispatch of integrated energy system containing electric hydrogen production based on VMD-GRU short-term wind power prediction", Int. J. Electric. Power Energy Syst., 154, 109420. https://doi.org/10.1016/j.ijepes.2023.109420.
  38. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct. Machines. 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  39. Dai, H. and Safarpour, H. (2021), "Frequency and thermal buckling information of laminated composite doubly curved open nanoshell", Adv. Nano Res., 10(1), 1-14. https://doi.org/10.12989/anr.2021.10.1.001.
  40. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  41. Dai, Z., Tang, H., Wu, S., Habibi, M., Moradi, Z. and Ali, H.E. (2023a), "Nonlinear consecutive dynamic instabilities of thermally shocked composite circular plates on the softening elastic foundation", Thin-Wall. Struct., 186, 110645. https://doi.org/10.1016/j.tws.2023.110645.
  42. Dai, Z., Wu, S., Habibi, M. and Ali, H.E. (2023b), "Application of point interpolation mesh-free method for magneto/electro rheological vibrations of sandwich conical panels", Aeros. Sci. Technol., 108180. https://doi.org/10.1016/j.ast.2023.108180.
  43. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  44. Dat, N.D., Anh, V.M., Quan, T.Q., Duc, P.T. and Duc, N.D. (2020), "Nonlinear stability and optimization of thin nanocomposite multilayer organic solar cell using Bees Algorithm", Thin-Wall. Struct., 149, 106520. https://doi.org/10.1016/j.tws.2019.106520.
  45. Ding, H. and Chen, L.-Q. (2023), "Shock isolation of an orthogonal six-DOFs platform with high-static-low-dynamic stiffness", J. Appl. Mech., 90, 111004-111001. 10.1115/1.4062886.
  46. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elements. 138 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017
  47. Duc, N.D., Seung-Eock, K., Quan, T.Q., Long, D.D. and Anh, V.M. (2018), "Nonlinear dynamic response and vibration of nanocomposite multilayer organic solar cell", Composite Structures. 184 1137-1144. https://doi.org/10.1016/j.compstruct.2017.10.064
  48. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  49. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323.
  50. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  51. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Waves Random Complex Media. 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  52. Ebrahimi, F. and Safarpour, H. (2018), "Vibration analysis of inhomogeneous nonlocal beams via a modified couple stress theory incorporating surface effects", Wind Struct., 27(6), 431-438.
  53. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Europ. Phys. J. Plus. 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  54. Eltaher, M.A. and Mohamed, N. (2020), "Nonlinear stability and vibration of imperfect CNTs by doublet mechanics", Appl. Mathem. Comput., 382, 125311.
  55. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct. Machines. 47(5), 521-545. doi/10.1080/15397734.2019.1566743.
  56. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  57. Fan, L., Kong, D., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Optimization dynamic responses of laminated multiphase shell in thermo-electro-mechanical conditions", Adv. Nano Res., 13(1), 29-45.
  58. Fan, S., Wang, Y., Cao, S., Sun, T. and Liu, P. (2021), "A novel method for analyzing the effect of dust accumulation on energy efficiency loss in photovoltaic (PV) system", Energy. 121112.
  59. Fang, Z., Zhu, Z., Wu, P. and Moradi, Z. (2023), "Vibration and damping analysis of sandwich electrorheological fluid deep arches with bi-directional FGM containers", Eng. Struct., 276, 115325.
  60. Fazaeli, A., Habibi, M. and Ekrami, A.A. (2016), "Experimental and finite element comparison of mechanical properties and formability of dual phase steel and ferrite - pearlite steel with the same chemical composition", Metallurgica Eng., 19(2), 84-93. http://dx.doi.org/10.22076/me.2017.41458.1064.
  61. Gao, J., Koopialipoor, M., Armaghani, D.J., Ghabussi, A., Baharom, S., Morasaei, A., Shariati, A., Khorami, M. and Zhou, J. (2020), "Evaluating the bond strength of FRP in concrete samples using machine learning methods", Smart Struct. Syst., 26(4), 403-418. https://doi.org/10.12989/sss.2020.26.4.403.
  62. Gao, M., Liu, B., Zhang, X., Zhang, Y., Li, X. and Han, G. (2021), "Ultrathin MoS2 nanosheets anchored on carbon nanofibers as free-standing flexible anode with stable lithium storage performance", J. Alloys Compounds. 162550.
  63. Ghabussi, A., Asgari Marnani, J. and Rohanimanesh, M.S. (2021), "Seismic performance assessment of a novel ductile steel braced frame equipped with steel curved damper", Structures. 31, 87-97. https://doi.org/10.1016/j.istruc.2021.01.073.
  64. Ghabussi, A., Marnani, J.A. and Rohanimanesh, M.S. (2020). "Improving seismic performance of portal frame structures with steel curved dampers", Structures.
  65. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct. Machines. 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  66. Gu, X., He, J., Wang, Z., Li, M., Habibi, M. and Hashemabadi, D. (2023), "Application of hyperbolic differential quadrature method for vibration responses of the electrorheological disk", Eng. Anal. Bound. Elements. 155, 599-615. https://doi.org/10.1016/j.enganabound.2023.05.035.
  67. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  68. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Processing. 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723
  69. Habibi, M., Darabi, R., Sa, J.C.d. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  70. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  71. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Europ. Phys. J. Plus. 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  72. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232(8), 625-636. https://doi.org/10.1177/1464420716642258
  73. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1
  74. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manufact. Processes. 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009
  75. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  76. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct. Machines. 1-30.
  77. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct. Machines. 1-19. https://doi.org/10.1080/15397734.2019.1697932.
  78. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct. Machines. 1-22. https://doi.org/10.1080/15397734.2020.1779086.
  79. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  80. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Waves Random Complex Media. 1-27. https://doi.org/10.1080/17455030.2019.1662968.
  81. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin-Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  82. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng.
  83. Hu, P., Moradi, Z., Ali, H.E. and Foong, L.K. (2022), "Metaheuristic-reinforced neural network for predicting the compressive strength of concrete", Smart Struct. Syst., 30(2), 195-207.
  84. Huang, N., Chen, Q., Cai, G., Xu, D., Zhang, L. and Zhao, W. (2020), "Fault diagnosis of bearing in wind turbine gearbox under actual operating conditions driven by limited data with noise labels", IEEE Transact. Instrument. Measure., 70, 1-10. https://doi.org/10.1109/TIM.2020.3025396.
  85. Huang, S., Huang, M. and Lyu, Y. (2021a), "Seismic performance analysis of a wind turbine with a monopile foundation affected by sea ice based on a simple numerical method", Eng. Appl. Comput. Fluid Mech., 15(1), 1113-1133. https://doi.org/10.1080/19942060.2021.1939790.
  86. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021b), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  87. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021c), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  88. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2022), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 38(Suppl 3), 2481-2498. https://doi.org/10.1007/s00366-021-01395-7.
  89. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021d), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  90. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021e), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., https://doi.org/10.1007/s00366-021-01320-y.
  91. Jiao, J., Ghoreishi, S.-m., Moradi, Z. and Oslub, K. (2021a), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x.
  92. Jiao, J., Ghoreishi, S.-m., Moradi, Z. and Oslub, K. (2021b), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., https://doi.org/10.1007/s00366-021-01391-x.
  93. Jin, X., Moradi, Z. and Rashidi, R. (2023), "Optimal Operation of Distributed Generations in Four-Wire Unbalanced Distribution Systems considering Different Models of Loads", Int. Transact. Electric. Energy Syst., 2023. https://doi.org/10.1155/2023/8763116.
  94. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin-Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631.
  95. Lam, D.C., Yang, F., Chong, A., Wang, J. and Tong, P. (2003), "Experiments and theory in strain gradient elasticity", J. Mech. Phys. Solids. 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X
  96. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  97. Li, M., Wang, T., Chu, F., Han, Q., Qin, Z. and Zuo, M.J. (2020b), "Scaling-basis chirplet transform", IEEE Transact. Ind. Electronics. 68(9), 8777-8788. https://doi.org/10.1109/TIE.2020.3013537.
  98. Li, Q., Tian, Y., Wu, D., Gao, W., Yu, Y., Chen, X. and Yang, C. (2021a), "The nonlinear dynamic buckling behaviour of imperfect solar cells subjected to impact load", Thin-Wall. Struct., 169, 108317. https://doi.org/10.1016/j.tws.2021.108317.
  99. Li, Q., Wang, Q., Wu, D., Chen, X., Yu, Y. and Gao, W. (2019a), "Geometrically nonlinear dynamic analysis of organic solar cell resting on Winkler-Pasternak elastic foundation under thermal environment", Compos. Part B: Eng., 163, 121-129. https://doi.org/10.1016/j.compositesb.2018.11.022.
  100. Li, Q., Wu, D., Gao, W. and Hui, D. (2023a), "Nonlinear dynamic stability analysis of axial impact loaded structures via the nonlocal strain gradient theory", Appl. Mathem. Modelling. 115, 259-278. https://doi.org/10.1016/j.apm.2022.10.029.
  101. Li, Q., Wu, D., Gao, W. and Tin-Loi, F. (2020c), "Size-dependent instability of organic solar cell resting on Winkler-Pasternak elastic foundation based on the modified strain gradient theory", Int. J. Mech. Sci., 177, 105306. https://doi.org/10.1016/j.ijmecsci.2019.105306.
  102. Li, Q., Wu, D., Gao, W., Tin-Loi, F., Liu, Z. and Cheng, J. (2019b), "Static bending and free vibration of organic solar cell resting on Winkler-Pasternak elastic foundation through the modified strain gradient theory", Europ. J. Mech. - A/Solids. 78, 103852. https://doi.org/10.1016/j.euromechsol.2019.103852.
  103. Li, X., Aftab, S., Abbas, A., Hussain, S., Aslam, M., Kabir, F., Abd-Rabboh, H.S., Hegazy, H., Xu, F. and Ansari, M. (2023b), "Advances in Mixed 2D and 3D Perovskite Heterostructure Solar Cells: A Comprehensive Review", Nano Energy. 108979. https://doi.org/10.1016/j.nanoen.2023.108979.
  104. Li, X., Dong, Z.-Q., Yu, P., Wang, L.-P., Niu, X.-D., Yamaguchi, H. and Li, D.-C. (2021b), "Effect of self-assembly on fluorescence in magnetic multiphase flows and its application on the novel detection for COVID-19", Phys. Fluids. 33(4), 042004.
  105. Li, X., Li, M., Habibi, M., Najaafi, N. and Safarpour, H. (2023c), "Optimization of hybrid energy management system based on high-energy solid-state lithium batteries and reversible fuel cells", Energy. 283, 128454. https://doi.org/10.1016/j.energy.2023.128454.
  106. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020d), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  107. Li, Z., Liu, Y., Yin, P., Peng, Y., Luo, J., Xie, S. and Pu, H. (2021c), "Constituting abrupt magnetic flux density change for power density improvement in electromagnetic energy harvesting", Int. J. Mech. Sci., 198, 106363. https://doi.org/10.1016/j.ijmecsci.2021.106363.
  108. Liang, J., Kato, B. and Wang, Y. (2023), "Constructing simplified models for dynamic analysis of monopile-supported offshore wind turbines", Ocean Eng., 271, 113785. https://doi.org/10.1016/j.oceaneng.2023.113785.
  109. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  110. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  111. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng.
  112. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct. Machines. 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  113. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermomechanical loadings", Mech. Based Des. Struct. Machines. 1-25. https://doi.org/10.1080/15397734.2020.1815544
  114. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-01004-z.
  115. Lu, C., Zhou, H., Li, L., Yang, A., Xu, C., Ou, Z., Wang, J., Wang, X. and Tian, F. (2022), "Split-core magnetoelectric current sensor and wireless current measurement application", Measurement. 188, 110527. https://doi.org/10.1016/j.measurement.2021.110527.
  116. Lu, L., Liao, K., Habibi, M., Safarpour, H. and Ali, H.E. (2023a). "Numerical methods to predict aero thermally induced vibrations of a curved pipe structure reinforced by GPLs", Structures.
  117. Lu, S., Li, S., Habibi, M. and Safarpour, H. (2023b), "Improving the thermo-electro-mechanical responses of MEMS resonant accelerometers via a novel multi-layer perceptron neural network", Measurement. 113168. https://doi.org/10.1016/j.measurement.2023.113168.
  118. Lu, Z.-Q., Wu, D., Ding, H. and Chen, L.-Q. (2021), "Vibration isolation and energy harvesting integrated in a Stewart platform with high static and low dynamic stiffness", Appl. Mathem. Modelling. 89, 249-267. https://doi.org/10.1016/j.apm.2020.07.060.
  119. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Europ. J. Mech.-A/Solids. 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  120. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022b), "Thermally nonlinear thermoelasticity of a one-dimensional finite domain based on the finite strain concept", Europ. J. Mechanics - A/Solids. 104726. https://doi.org/10.1016/j.euromechsol.2022.104726.
  121. Ma, B., Chen, K.-y., Habibi, M. and Albaijan, I. (2023), "Static/dynamic analyses of sandwich micro-plate based on modified strain gradient theory", Mech. Adv. Mater. Struct., 1-8. https://doi.org/10.1080/15376494.2023.2219453.
  122. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  123. Ma, L., Liu, X. and Moradi, Z. (2021a), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  124. Ma, R., Karimzadeh, M., Ghabussi, A., Zandi, Y., Baharom, S., Selmi, A. and Maureira-Carsalade, N. (2021b), "Assessment of composite beam performance using GWO-ELM metaheuristic algorithm", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01363-1.
  125. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The Content of Heavy Metals in Cigarettes and the Impact of Their Leachates on the Aquatic Ecosystem", Sustainability. 14(8), 4752. https://doi.org/10.3390/su14084752.
  126. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  127. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01002-1.
  128. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023.
  129. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control. 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  130. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. 10.22034/JSM.2019.665264.
  131. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Waves Random Complex Media. 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  132. Moradi, Z., Ebrahimi, F. and Davoudi, M. (2022), "Coupled Newmark beta technique and GDQ method for energy harvesting and vibration control of the piezoelectric MEMS/NEMS subjected to a blast load", Eng. Anal. Bound. Elements. 144, 492-506. https://doi.org/10.1016/j.enganabound.2022.08.021
  133. Morasaei, A., Ghabussi, A., Aghlmand, S., Yazdani, M., Baharom, S. and Assilzadeh, H. (2021), "Simulation of steel-concrete composite floor system behavior at elevated temperatures via multi-hybrid metaheuristic framework", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01228-z.
  134. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.w. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomolecular Struct. Dyn., 1-12. https://doi.org/10.1080/07391102.2020.1751297.
  135. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Reports. 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  136. Peng, S., Habibi, M. and Pourjabari, A. (2023), "Generalized differential quadrature element solution, swarm, and GA optimization technique to obtain the optimum frequency of the laminated rotary nanostructure", Eng. Anal. Bound. Elements. 151, 101-114. https://doi.org/10.1016/j.enganabound.2023.02.052.
  137. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Mathem. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041
  138. Quyen, N.V. and Duc, N.D. (2022), "Vibration and nonlinear dynamic response of nanocomposite multi-layer solar panel resting on elastic foundations", Thin-Wall. Struct., 177, 109412. https://doi.org/10.1016/j.tws.2022.109412.
  139. Sabzevari, F., Amelirad, O., Moradi, Z. and Habibi, M. (2023), "Artificial intelligence evaluation of COVID-19 restrictions and speech therapy effects on the autistic children's behavior", Sci. Reports. 13(1), 4312. https://doi.org/10.1038/s41598-022-25902-y.
  140. SafarPour, H. and Ghadiri, M. (2017), "Critical rotational speed, critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid", Microfluid. Nanofluidics. 21(2), 22.
  141. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Europ. Phys. J. Plus. 133(12), 532.
  142. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8
  143. SafarPour, H., Hosseini, M. and Ghadiri, M. (2017a), "Influence of three-parameter viscoelastic medium on vibration behavior of a cylindrical nonhomogeneous microshell in thermal environment: An exact solution", J. Thermal Stresses. 40(11), 1353-1367. https://doi.org/10.1080/01495739.2017.1350827
  144. SafarPour, H., Mohammadi, K., Ghadiri, M. and Rajabpour, A. (2017b), "Influence of various temperature distributions on critical speed and vibrational characteristics of rotating cylindrical microshells with modified lengthscale parameter", Europ. Phys. J. Plus. 132(6), 1-19. https://doi.org/10.1140/epjp/i2017-11280-8
  145. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control. 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  146. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-00949-5.
  147. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Archiv Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  148. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-01024-9.
  149. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Materials. 13(7), 1707. https://doi.org/10.3390/ma13071707.
  150. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry. 12(4), 586. https://doi.org/10.3390/sym12040586.
  151. Shariati, M., Azar, S.M., Arjomand, M.-A., Tehrani, H.S., Daei, M. and Safa, M. (2020d), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  152. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021a), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  153. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.-T. and Salih, M.N. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  154. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020e), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  155. Shariati, M., Kamyab, H., Habibi, M., Ahmadi, S., Naghipour, M., Gorjinezhad, F., Mohammadirad, S. and Aminian, A. (2023), "Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates", Fuel. 348, 128311. https://doi.org/10.1016/j.fuel.2023.128311.
  156. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020f), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  157. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020g), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  158. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020h), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  159. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020i), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct. 34(3), 377-391. http://dx.doi.org/10.12989/scs.2020.34.3.377.
  160. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2021b), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Construct. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  161. Shariati, M., Sulong, N.R. and Khanouki, M.A. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  162. Shariati, M., Sulong, N.R., Shariati, A. and Khanouki, M.A. (2016a), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  163. Shariati, M., Sulong, N.R., Shariati, A. and Kueh, A. (2016b), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Construct. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  164. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020j), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos Struct. 35(2), 237-247. http://dx.doi.org/10.12989/scs.2020.35.2.237.
  165. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  166. Sun, T., Peng, L., Ji, X. and Li, X. (2023), "A Half-Cycle Negative-Stiffness Damping Model and Device Development", Struct. Control Health Monit., 2023. https://doi.org/10.1155/2023/4680105.
  167. Tang, J., Wu, S., Habibi, M., Safarpour, M. and Ali, H.E. (2023), "Flutter analysis of multi-directional functionally graded sector poroelastic disks", Aeros. Sci. Technol., 140, 108481. https://doi.org/10.1016/j.ast.2023.108481.
  168. Tian, Y., Li, Q., Wu, D., Chen, X. and Gao, W. (2022), "Nonlinear dynamic stability analysis of clamped and simply supported organic solar cells via the third-order shear deformation plate theory", Eng. Struct., 252, 113616. https://doi.org/10.1016/j.engstruct.2021.113616.
  169. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the Self-Healing of Cementitious Materials with a Hydrogel System", Gels. 8(5), 278. https://doi.org/10.3390/gels8050278.
  170. Wang, H., Xu, Z., Ge, X., Liao, Y., Yang, Y., Zhang, Y., Yao, B. and Chai, Y. (2023a), "A junction temperature monitoring method for IGBT modules based on turn-off voltage with convolutional neural networks", IEEE Transact. Power Electronics. https://doi.org/10.1109/TPEL.2023.3278675.
  171. Wang, H., Zhang, H., Dousti, R. and Safarpour, H. (2021), "Dynamic simulation of moderately thick annular system coupled with shape memory alloy and multi-phase nanocomposite face sheets", Eng. Comput., 1-24. https://doi.org/10.1007/s00366-020-01246-x.
  172. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022b), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bi-directional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elements. 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  173. Wang, P., Wu, X. and He, X. (2023b), "Vibration-theoretic approach to vulnerability analysis of nonlinear vehicle platoons", IEEE Transact. Intell. Transport. Syst., https://doi.org/10.1109/TITS.2023.3278574.
  174. Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2023c), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct., 303, 116246. https://doi.org/10.1016/j.compstruct.2022.116246.
  175. Wang, Y., Jia, Q., Deng, T., Habibi, M., Al-Kikani, S. and Ali, H.E. (2023d), "Wave propagation analysis of the ball in the handball's game", Struct. Eng. Mech., 85(6), 729-742.
  176. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022c), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Europ. J. Mech.-A/Solids. 95 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  177. Wang, Z., Li, J., Hu, C., Li, X. and Zhu, Y. (2024), "Hybrid energy storage system and management strategy for motor drive with high torque overload", J. Energy Storage. 75, 109432. https://doi.org/10.1016/j.est.2023.109432.
  178. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  179. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  180. Wu, Z., Lin, B., Fan, J., Zhao, J., Zhang, Q. and Li, L. (2022), "Effect of dielectric relaxation of epoxy resin on dielectric loss of medium-frequency transformer", IEEE Transact. Dielectrics Electric. Insulation. 29(5), 1651-1658. https://doi.org/10.1109/TDEI.2022.3193652.
  181. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound. Elements. 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003.
  182. Xiang, J., Lai, Y., Moradi, Z. and Khorami, M. (2023), "Wave propagation phenomenon of functionally graded graphene oxide powder-strengthened nanocomposite curved beam", Solid State Commun., 115193. https://doi.org/10.1016/j.ssc.2023.115193.
  183. Xiong, Q.-M., Chen, Z., Huang, J.-T., Zhang, M., Song, H., Hou, X.-F., Li, X.-B. and Feng, Z.-J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Metals. 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6
  184. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021a), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  185. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021b), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395.
  186. Yang, C., Su, C., Hu, H., Habibi, M., Safarpour, H. and Khadimallah, M.A. (2023), "Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm", Solar Energy. 253, 343-359. https://doi.org/10.1016/j.solener.2023.02.036.
  187. Yang, N., Moradi, Z., Arvin, H., Muhsen, S. and Khadimallah, M.A. (2022a), "A study on small scale thermal dynamic instability of rotating GPL-reinforced microbeams under principal parametric resonance stimulation of axial and transversal modes regarding the proportional damping", ThinWall. Struct., 180, 109806. https://doi.org/10.1016/j.tws.2022.109806.
  188. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022b), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elements. 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  189. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Processing. 165, 108373.
  190. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  191. Zhang, M., Jiang, X. and Arefi, M. (2023a), "Dynamic formulation of a sandwich microshell considering modified couple stress and thickness-stretching", Europ. Phys. J. Plus. 138(3), 227. 10.1140/epjp/s13360-023-03753-4.
  192. Zhang, P., Gao, Y., Moradi, Z., Ali, Y.A. and Khadimallah, M.A. (2022), "A semi-analytical procedure for cross section effect on the buckling and dynamic stability of composite imperfect truncated conical microbeam", Steel Compos. Struct., 44(3), 357-374. https://doi.org/10.12989/scs.2022.44.3.371.
  193. Zhang, Q., Zou, X., Wang, Y. and Habibi, M. (2023b), "Study on photocatalytic, electric, and sensing behavior of Co-and Agcodoped tin dioxide (SnO2) nano particles", Mater. Sci. Eng.: B. 296 116687. https://doi.org/10.1016/j.mseb.2023.116687,
  194. Zhang, S., Lai, Y., Chen, K., Habibi, M., Khorami, M. and Haider Mussa, Z. (2023c), "Influence of MWCNT's waviness and aggregation factors on wave dispersion response of MWCNT-strengthened nanocomposite curved beam", Structures. 53, 1239-1249. https://doi.org/10.1016/j.istruc.2023.04.024.
  195. Zhang, W., Liu, Z., Liang, Z., Oslub, K. and Safarpour, H. (2021a), "A comprehensive computer simulation of the size-dependent sector or complete microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01440-5.
  196. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021b), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Waves Random Complex Media. 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  197. Zhao, H., Li, C., Fu, Y., Oyarhossein, M.A., Habibi, M. and Safarpour, H. (2023), "Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions", Thin-Wall. Struct., 183, 110360. https://doi.org/10.1016/j.tws.2022.110360.
  198. Zhao, H., Wang, L., Issakhov, A. and Safarpour, H. (2021a), "Poroelasticity framework for stress/strain responses of the multi-phase circular/annular systems resting on various types of elastic foundations", Europ. Phys. J. Plus. 136(8), 1-44. https://doi.org/10.1140/epjp/s13360-020-01001-7
  199. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  200. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021b), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  201. Zheng, W., Liu, J., Oyarhossein, M.A., Safarpour, H. and Habibi, M. (2023), "Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers", Eng. Anal. Bound. Elements. 146, 170-183. https://doi.org/10.1016/j.enganabound.2022.10.019.
  202. Zheng, Y., Jin, H., Jiang, C., Moradi, Z., Khadimallah, M.A. and Moayedi, H. (2022), "Analyzing behavior of circular concrete-filled steel tube column using improved fuzzy models", Steel Compos. Struct., 43(5), 625-637. https://doi.org/10.12989/scs.2022.43.5.625.
  203. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  204. Zhou, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Intelligent modeling to investigate the stability of a two-dimensional functionally graded porosity-dependent nanobeam", Comput. Concrete, 30(2), 85-97.
  205. Zhou, L., Moradi, Z., Al-Tamimi, H.M. and Ali, H.E. (2022b), "On propagation of elastic waves in an embedded sigmoid functionally graded curved beam", Steel Compos. Struct/. 44(1), 17.
  206. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Cleaner Product., 132697. https://doi.org/10.1016/j.jclepro.2022.132697.
  207. Zur, K.K., Arefi, M., Kim, J. and Reddy, J.N. (2020), "Free vibration and buckling analyses of magneto-electro-elastic FGM nanoplates based on nonlocal modified higher-order sinusoidal shear deformation theory", Compos. Part B: Eng., 182, 107601. https://doi.org/10.1016/j.compositesb.2019.107601.