Advances in nano research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Shear deformable-based kinematic model for static analysis of G-Ori composite panel

  • Ali Basem (Faculty of Engineering, Warith Al-Anbiyaa University) ;
  • Mohanad Hatem Shadhar (Department of Civil Engineering, College of Engineering, Al-Iraqia University) ;
  • Yasser M. Kadhim (Civil Engineering Department, College of Engineering, Al-Nahrain University) ;
  • Ranganathaswamy M.K. (Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University)) ;
  • Raman Kumar (School of Mechanical Engineering, Rayat Bahra University) ;
  • Barno Abdullaeva (Department of Mathematics and Information Technologies, Vice-Rector for Scientific Affairs, Tashkent State Pedagogical University) ;
  • Ibrahim Mahariq (GUST Engineering and Applied Innovation Research Center (GEAR), Gulf University for Science and Technology) ;
  • Essam Althaqafi (Civil Engineering Department, College of Engineering, King Khalid University) ;
  • Saiful Islam (Civil Engineering Department, College of Engineering, King Khalid University)
  • Received : 2024.10.03
  • Accepted : 2024.12.09
  • Published : 2024.12.25
⟨ Previous Next ⟩

Abstract

In this work, an analytical-based formulation for static bending analysis of a G-Ori reinforced shell in cylindrical form subjected to thermomechanical loads is presented. The governing equations are derived using a shear deformable-based kinematic model. The virtual work principle is used to derived governing equations in terms of in-plane displacement and rotations components. The solution procedure is extended in an analytical manner using the Navier's technique. To constitute the behavioral relations, the effective material properties of graphene origami nanofiller in a copper matrix are derived using the statistical and experimental relations. The effective material properties are evaluated using the Halpin-Tsai micromechanical model and rule of mixture. The parametric results are obtained in terms of thermal loads, volume fraction and folding parameter. Some numerical results in tabular form is presented to investigated impact of content and folding characteristics of G-Ori on the static bending results. The results show a decrease in transverse deflection with an addition in graphene origami content. It is deduced that the transverse deflection is decreased about 20% with a 2% enhancement in the graphene origami content.

Keywords

Acknowledgement

The authors extend their appreciation to the Deanship of Research and Graduate Studies at King Khalid University for funding this work through a Large Research Project under grant number RGP2/447/45

References

  1. Adab, N., Arefi, M. and Amabili, M. (2022), "A comprehensive vibration analysis of rotating truncated sandwich conical microshells including porous core and GPL-reinforced facesheets", Compos. Struct., 279, 114761. https://doi.org/10.1016/j.compstruct.2021.114761
  2. Arefi, M. (2016), "Analysis of wave in a functionally graded magneto-electro-elastic nano-rod using nonlocal elasticity model subjected to electric and magnetic potentials", Acta. Mech., 227, 2529-2542. https://doi.org/10.1007/s00707-016-1584-7
  3. Arefi, M. (2018), "Nonlocal free vibration analysis of a doubly curved piezoelectric nano shell", Steel. Compos. Struct., 27(4), 479-493. https://doi.org/10.12989/scs.2018.27.4.479
  4. Arefi, M. and Allam, M.N.M. (2015), "Nonlinear Responses of an Arbitrary FGP Circular Plate Resting on Foundation", Smart. Struct. Syst., 16(1), 81-100. https://doi.org/10.12989/sss.2015.16.1.081
  5. Arefi, M. and Mohammad-Rezaei Bidgoli, E. (2019) "Electroelastic displacement and stress analysis of the piezoelectric doubly curved shells resting on Winkler's foundation subjected to applied voltage", Mech. Adv. Mater. Struct, 26(23), 1981- 1994. https://doi.org/10.1080/15376494.2018.1455937 
  6. Arefi, M. and Rahimi, G.H. (2010), "Thermo elastic analysis of a functionally graded cylinder under internal pressure using first order shear deformation theory", Sci. Res. Essays., 5(12), 1442-1454. https://doi.org/10.5897/SRE.9000953
  7. Arefi, M. and Rahimi, G.H. (2012), "Studying the nonlinear behavior of the functionally graded annular plates with piezoelectric layers as a sensor and actuator under normal pressure", Smart. Struct. Syst., 9(2), 127-143. https://doi.org/10.12989/sss.2012.9.2.127.
  8. Arefi, M. and Zenkour, A.M. (2016a), "Free vibration, wave propagation and tension analyses of a sandwich micro/nano rod subjected to electric potential using strain gradient theory" Mater. Res. Exp., 3(11), 115704. https://doi.org/10.1088/2053-1591/3/11/115704
  9. Arefi, M. and Zenkour, A.M. (2016b), "Employing sinusoidal shear deformation plate theory for transient analysis of three layers sandwich nanoplate integrated with piezo-magnetic facesheets", Smart. Mater. Struct., 25, 115040. https://doi.org/10.1088/0964-1726/25/11/115040
  10. Arefi, M. and Zenkour, A.M. (2017), "Thermo-electro-magnetomechanical bending behavior of size-dependent sandwich piezomagnetic nanoplates", Mech. Res. Commun., 84, 27-42. https://doi.org/10.1016/j.mechrescom.2017.06.002
  11. Arefi, M. and Zenkour, A.M. (2018), "Size-dependent electroelastic analysis of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory", J. Intel. Mater. Syst. Struct., 29(7), 1394-1406. https://doi.org/10.1177/1045389X17733333
  12. Arefi, M. and Zenkour, A.M. (2019), "Influence of magnetoelectric environments on size-dependent bending results of three-layer piezomagnetic curved nanobeam based on sinusoidal shear deformation theory", J. Sandw. Struct. Mater., 21(8), 2751-2778. https://doi.org/10.1177/1099636217723186
  13. Arefi, M., Rahimi, G.H. and Khoshgoftar, M.J. (2012), "Exact solution of a thick walled functionally graded piezoelectric cylinder under mechanical, thermal and electrical loads in the magnetic field", Smart. Struct. Syst., 9(5), 427-439. https://doi.org/10.12989/sss.2012.9.5.427
  14. Arefi, M., Faegh, R.K. and Loghman, A. (2016), "The effect of axially variable thermal and mechanical loads on the 2D thermoelastic response of FG cylindrical shell", J. Therm. Stress., 39(12), 1539-1559. https://doi.org/10.1080/01495739.2016.1217178
  15. Arefi, M. Mohammad-Rezaei Bidgoli, E. Zenkour, A.M. (2018), "Size-dependent free vibration and dynamic analyses of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory", Smart. Struct. Syst., 22(1), 27-40. https://doi.org/10.12989/sss.2018.22.1.027.
  16. Arefi, M., Mohammad-Rezaei Bidgoli, E. and Zenkour, A.M. (2019) "Free vibration analysis of a sandwich nano-plate including FG core and piezoelectric face-sheets by considering neutral surface", Mech. Adv. Mater. Struct, 26(9), 741-752. https://doi.org/10.1080/15376494.2018.1455939
  17. Arefi, M., Lori Dehsaraji, M. and Loghman, A. (2020), "Three dimensional free vibration analysis of functionally graded nano cylindrical shell considering thickness stretching effect", Steel. Compos. Struct., 34(5), 657-670. https://doi.org/10.12989/scs.2020.34.5.657.
  18. Arefi, M., Moghaddam, S.K., Bidgoli, E.M.R., Kiani, M. and Civalek, O. (2021), "Analysis of graphene nanoplatelet reinforced cylindrical shell subjected to thermo-mechanical loads", Compos. Struct., 255(1), 112924. https://doi.org/10.1016/j.compstruct.2020.112924.
  19. Arefi, M., Mohammad-Rezaei Bidgoli, E. and Civalek O. (2022), "Bending response of FG composite doubly curved nanoshells with thickness stretching via higher-order sinusoidal shear theory", Mech. Based. Des. Struct. Mach., 50(7), 2350-2378. https://doi.org/10.1080/15397734.2020.1777157
  20. Alibeigloo, A. (2014), "Free vibration analysis of functionally graded carbon nanotube reinforced composite cylindrical panel embedded in piezoelectric layers by using theory of elasticity", Eur. J. Mech. A Solids., 44, 104-115. https://doi.org/10.1016/j.euromechsol.2013.10.002
  21. Abouelregal, A.E., Ersoy, H. and Civalek, Ö . (2021), "Solution of Moore-Gibson-Thompson equation of an unbounded medium with a cylindrical hole", Mathematics, 9, 1536. https://doi.org/10.3390/math9131536.
  22. Babaei, H. and Eslami, M.R. (2021), "Nonlinear analysis of thermal-mechanical coupling bending of FGP infinite length cylindrical panels based on PNS and NSGT", Appl. Math. Modell., 91, 1061-1080. https://doi.org/10.1016/j.apm.2020.10.004.
  23. Bai, B., Wang, J., Zhai, Z. and Xu, T. (2017), "The penetration processes of red mud filtrate in a porous medium by seepage", Transp. Porous. Media., 117, 207-227. https://doi.org/10.1007/s11242-017-0829-9.
  24. Bai, B., Xu, T., Nie, Q. and Li, P. (2020), "Temperature-driven migration of heavy metal Pb2+ along with moisture movement in unsaturated soils", Int. J. Heat. Mass. Transf., 153, 119573. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119573.
  25. Bai, B., Bai, F., Li, X., Nie, Q., Jia, X. and Wu, H. (2022), "The remediation efficiency of heavy metal pollutants in water by industrial red mud particle waste", Environ. Tech. Innov., 28, 102944. https://doi.org/10.1016/j.eti.2022.102944
  26. Bai, B., Bai, F., Nie, Q. and Jia, X. (2023a), "A high-strength red mud-fly ash geopolymer and the implications of curing temperature", Powd. Tech., 416, 118242. https://doi.org/10.1016/j.powtec.2023.118242
  27. Bai, B., Fan, B., Qingke, N. and Xiangxin. J. (2023b), "A highstrength red mud-fly ash geopolymer and the implications of curing temperature", Powd. Tech., 416, 118242. https://doi.org/10.1016/j.powtec.2023.118242
  28. Bai, B., Jing, C., Fan, B., Qingke, N. and Xiangxin. J. (2024a), "Corrosion effect of acid/alkali on cementitious red mud-fly ash materials containing heavy metal residues", Env. Tech. Innov., 33, 103485. https://doi.org/10.1016/j.eti.2023.103485
  29. Bai, B., Jing, C., Bin, Z., Liang, C. and Yongchen. Z. (2024b), "The solidification of heavy metal Pb2+-contaminated soil by enzyme-induced calcium carbonate precipitation combined with biochar", Biochem. Eng. J., 212, 109496. https://doi.org/10.1016/j.bej.2024.109496
  30. Bai, B., Bixia, Z., Jing, C. and Hanxiang, F. (2024c), "Development of a natural inorganic diatomite curing agent on heavy metal-contaminated loess", Phys. Chemist. Earth., 136, 103790. https://doi.org/10.1016/j.pce.2024.103790 
  31. Banoqitah, E.M., Hussain, M., Khadimallah, M.A., Ghandourah, E., Yahya, A., Basha, M. and Alshoaibi, A. (2022), "A simplified directly determination of natural frequencies of CNT: Via aspect ratio", Adv. Nano Res., 13(3), 207. https://doi.org/10.12989/anr.2022.13.3.207 
  32. Bao, X., Li, J., Shen, J., Chen, X., Zhang, C. and Cui, H. (2025), "Comprehensive multivariate joint distribution model for marine soft soil based on the vine copula", Comput. Geotech, 177, A, 106814. https://doi.org/10.1016/j.compgeo.2024.106814 
  33. Cui, M., Han, D., Liu, H., Li, K.C., Tang, M., Chang, C.C., Ayaz, F., Sheng, Z. and Guan, Y.L. (2024), "Secure data sharing for consortium blockchainenabled vehicular social networks," IEEE. T. Vehic. Tech., 1-14. https://doi.org/10.1109/TVT.2024.3448207. 
  34. Chen, X. Feng, P. Li, X. (2024), "High reactivity of dimethyl ether activated by zeolite ferrierite within a fer cage: A prediction study", Molecules, 29, 2000. https://doi.org/10.3390/molecules29092000 
  35. Culver, C.G., Dym, C.L. and Brogan, D.K. (1972), "Bending behavior of cylindrical web panels", J. Struct. Div., 98(10). https://doi.org/10.1061/JSDEAG.0003354. 
  36. Du, Y., Keller, T., Song, C., Wu, L. and Xiong, J. (2021), "Origami-inspired carbon fiber-reinforced composite sandwich materials-Fabrication and mechanical behavior", Compos. Sci. Tech., 205: 108667. https://doi.org/10.1016/j.compscitech.2021.108667. 
  37. Fan, Y. and Shen, H.S. (2022), "Non-symmetric stiffness of origami-graphene metamaterial plates", Compos. Struct., 297, 115974. https://doi.org/10.1016/j.compstruct.2022.115974. 
  38. Fu, T., Hu, X. and Yang, C. (2023), "Impact response analysis of stiffened sandwich functionally graded porous materials doublycurved shell with re-entrant honeycomb auxetic core", Appl. Math. Modell., 124, 553-575. https://doi.org/10.1016/j.apm.2023.08.024 
  39. Fan, J., Pan, Y., Wang, H. and Song, F. (2024a), "Efficient reverse osmosis-based desalination using functionalized graphene oxide nanopores", Appl. Surf. Sci., 674, 160937. https://doi.org/10.1016/j.apsusc.2024.160937 
  40. Fan, J., Zhang, X., He, N., Song, F. and Zhang, X. (2024b), "Physical absorption and thermodynamic modeling of CO2 in new deep eutectic solvents", J. Mole. Liq., 402, 124752. https://doi.org/10.1016/j.molliq.2024.124752. 
  41. Gao, X., Dai, Y., Zhang, C., Zhang, Y., Zong, W., Zhang, W., ... and He, G. (2023), "When it's heavier: Interfacial and solvation chemistry of isotopes in aqueous electrolytes for Zn-ion Batteries", Angew. Chem. Int. Ed., 62, 16, e202300608. https://doi.org/10.1002/anie.202300608 
  42. Gao, Y. Liu, Q. Yang, Y. and Wang, K. (2024), "Latent representation discretization for unsupervised text style generation", Inform. Proc. Manag., 61(3), 103643. https://doi.org/10.1016/j.ipm.2024.103643 
  43. Gong, H., Sardans, J., Huang, H., Yan, Z., Wang, Z. and Peñuelas, J. (2024), "Global patterns and controlling factors of tree bark C : N : P stoichiometry in forest ecosystems consistent with biogeochemical niche hypothesis", New Phytol., 244(4), 1303- 1314. https://doi.org/10.1111/nph.20119. 
  44. Guo, R., Qi, L. and Mo, Z. (2019), "SiO2@Graphene composite materials obtained through different methods used as substrate materials", Silicon, 11, 1261-1266. https://doi.org/10.1007/s12633-018-0058-z 
  45. Guo, L., Zhao, S., Guo, Y., Yang, J. and Kitipornchai, S. (2023), "Bandgaps in functionally graded phononic crystals containing graphene origami-enabled metamaterials", Int. J. Mech. Sci., 240, 107956. https://doi.org/10.1016/j.ijmecsci.2022.107956. 
  46. Guo, S., Deng, B., Chen, C., Ke, J., Wang, J., Long, S. and Xu, K. (2024), "Seeking in ride-on-demand service: A reinforcement learning model with dynamic price prediction," IEEE. Internet. Things. J., 11(180, 29890-29910. https://doi.org/10.1109/JIOT.2024.3407119. 
  47. Han, D., Pan, N. and Li, K.C. (2022a), "A traceable and revocable ciphertext-policy attribute-based encryption scheme based on privacy protection," IEEE. T. Depend. Sec. Comput., 19(1), 316-327. https://doi.org/10.1109/TDSC.2020.2977646. 
  48. Han, D., Zhu, Y., Li, D., Liang, W., Souri, A. and Li, K.C. (2022b), "A blockchain-based auditable access control system for private data in service-centric IoT environments," IEEE. Trans. Ind. Inform., 18(5), 3530-3540. https://doi.org/10.1109/TII.2021.3114621. 
  49. Han, D., Shi, J., Zhao, J., Wu, H., Zhou, Y., Li, L. H., Khan, M.K. and Li, K.C. (2025), "LRCN: Layer-residual Co-Attention Networks for visual question answering", Exp. Syst. Appl., 263, 125658. https://doi.org/10.1016/j.eswa.2024.125658.
  50. Huang, B., Kang, F., Li, X. and Zhu, S. (2024a), "Underwater dam crack image generation based on unsupervised image-to-image translation", Auto. Constr., 163, 105430. https://doi.org/10.1016/j.autcon.2024.105430
  51. Huang, J., Feng, C., Wang, X. and Zhang, Y. (2024b), "Continuous-discontinuous element method for simulating three-dimensional reinforced concrete structures", Struct. Concr., Early View. https://doi.org/10.1002/suco.202300531 
  52. Huang, Z., Li, K., Jiang, Y., Jia, Z., Lv, L. and Ma, Y. (2024c), "Graph relearn network: Reducing performance variance and improving prediction accuracy of graph neural networks", Knowl. Based Syst., 301, 112311. https://doi.org/10.1016/j.knosys.2024.112311
  53. Jam, J.E., Maleki, S. and Andakhshideh, A. (2013), "Static analysis of laminated piezoelectric cylindrical panels", Int. J. Aer. Sci. 2(1), 16-28. https://doi.org/10.5923/j.aerospace.20130201.03.
  54. Ji, X., Jiang, P., Jiang, Y., Chen, H., Wang, W., Zhong, W., Zhang, X. and Zang, D. (2023), "Toward enhanced aerosol particle adsorption in never-bursting bubble via acoustic levitation and controlled liquid compensation", Adv. Sci., 10(19), 2300049. https://doi.org/10.1002/advs.202300049
  55. Kong, W., Fu, T. and Rabczuk, T. (2024), "Improvement of broadband low-frequency sound absorption and energy absorbing of arched curve Helmholtz resonator with negative Poisson's ratio", Appl. Acoust., 221, 110011. https://doi.org/10.1016/j.apacoust.2024.110011
  56. Lai, Y., Zhang, T., Yin, X., Zhu, C., Du, Y., Li, Z. and Gao, J. (2024), "An antibiotic-free platform for eliminating persistent Helicobacter pylori infection without disrupting gut microbiota", Acta. Pharm. Sin. B., 14(7), 3184-3204, https://doi.org/10.1016/j.apsb.2024.03.014.
  57. Li, Y., Li, J., Feng, C., Wen, M. and Zhang, Y. (2024a), "An interface constitutive model of plastic tensile-compressive damage under impact loading based on continuousdiscontinuous framework", Comput. Geotech., 173, 106502. https://doi.org/10.1016/j.compgeo.2024.106502
  58. Li, J., Yang, H., Gu, X., Zou, Y., Zhan, D. and Peng, J. (2024b), "Recent advances in scanning electrochemical microscopy for probing the sites in electrocatalysts, J. Mater. Chem. A., 12(30), 18733-18750, http://dx.doi.org/10.1039/D4TA01292E
  59. Li, J., Han, D. and Weng, T.H. (2025), "A secure data storage and sharing scheme for port supply chain based on blockchain and dynamic searchable encryption", Comput. Stand. Interf., 91, 103887. https://doi.org/10.1016/j.csi.2024.103887.
  60. Ling, W., Jing, C., Wan, J., Mao, A., Xiao, Q., Guan, J., Cheng, J., Liu, C. and E, P. (2024), "Design and construction of the nearearth space plasma simulation system of the Space Plasma Environment Research Facility", J. Plasma. Phys., 90(1), 345900101. https://doi.org/10.1017/S0022377823001460
  61. Liang, K., Sun, P. and Wang, D. (2024a), "Quantitative analysis of deformation performance for sakew slab based on deformation energy decomposition method of triangular prism element", Structures, 63, 106447. https://doi.org/10.1016/j.istruc.2024.106447
  62. Liang, S. Gao, Y. Hu, C. Hao, A. and Qin, H. (2024b), "Efficient photon beam diffusion for directional subsurface scattering", IEEE. T. Visual. Comput. Graph., Early Access. https://doi.org/10.1109/TVCG.2024.3447668.
  63. Long, X., Li, Y., Shen, Z., Su, Y., Gu, T. and Siow, K.S. (2024), "Review of uniqueness challenge in inverse analysis of nanoindentation", J. Manuf. Proc., 131, 1897-1916. https://doi.org/10.1016/j.jmapro.2024.10.005
  64. Lv, H., Zeng, J., Zhu, Z., Dong, S. and Li, W. (2024), "Study on prestress distribution and structural performance of heptagonal six-five-strut alternated cable dome with inner hole", Structures, 65, 106724, https://doi.org/10.1016/j.istruc.2024.106724.
  65. Lu, K. (2024), "Online distributed algorithms for online noncooperative games with stochastic cost functions: High probability bound of regrets", IEEE. T. Auto. Cont., 69(12), 8860-8867. https://doi.org/10.1109/TAC.2024.3419018.
  66. Lu, Y. Guo, Z. Zhang, M., Zhang, M, Jiang, X. and Wang, X. (2025), "Flow-heat coupling analysis of the 1/4 symmetrical CAP1400 nuclear island loop based on the source term approach", Annals. Nuclear. Energy., 211, 110926. https://doi.org/10.1016/j.anucene.2024.110926
  67. Luo, Y., Zhang, H., Chen, Z., Li, Q., Ye, S. and Liu, Q. (2024), "Novel multidimensional composite development for aging resistance of SBS-modified asphalt by attaching zinc oxide on expanded vermiculite", Energy. Fuels., 38(17), 16772-16781. https://doi.org/10.1021/acs.energyfuels.4c02685.
  68. Luo, Y.X. and Dong, Y.L. (2024), "Strain measurement at up to 3000°C based on Ultraviolet-Digital Image Correlation", NDT E Int., 146, 103155. https://doi.org/10.1016/j.ndteint.2024.103155.
  69. Lopatin, A.V. and Morozov, E.V. (2021), "Fundamental frequency of a sandwich cylindrical panel with clamped edges", J. Sandw. Struct. Mater., 23(1), 345-364. https://doi.org/10.1177/1099636219833433
  70. Madenci, E. Ö zkiliç, Y.O. Hakamy, A. and Tounsi, A. (2023), "Experimental tensile test and micro-mechanic investigation on carbon nanotube reinforced carbon fiber composite beams", Adv. Nano. Res., 14(5), 443-450. https://doi.org/10.12989/anr.2023.14.5.443.
  71. Mohammad-Rezaei Bidgoli, E. and Arefi, M. (2022), Innovations in Graphene-Based Polymer Composites, Woodhead Publishing Series in Composites Science and Engineering, 521-557. https://doi.org/10.1016/B978-0-12-823789-2.00003-0.
  72. Mohammad-Rezaei Bidgoli, E. and Arefi, M. (2023a), "Sizedependent thermomechanical critical loads of GPL-reinforced nanobeams", Wave. Random. Complex. Med., 1-21. https://doi.org/10.1080/17455030.2023.2169385
  73. Mohammad-Rezaei Bidgoli, E. and Arefi, M. (2023b), "Dynamic results of GNPRC sandwich shells", Steel. Compos. Struct., 48(3), 263-273. https://doi.org/10.12989/scs.2023.48.3.263 Full Text PDF
  74. Mohammad-Rezaei Bidgoli, E. and Arefi, M. (2023c), "Effect of porosity and characteristics of carbon nanotube on the nonlinear characteristics of a simply-supported sandwich plate", Arch. Civil Mech. Eng., 23, 214. https://doi.org/10.1007/s43452-023-00752-1
  75. Mohammad-Rezaei Bidgoli, E., Arefi, M. (2023d), "Nonlinear vibration analysis of sandwich plates with honeycomb core and graphene nanoplatelet-reinforced face-sheets", Arch. Civil Mech. Eng., 23, 56. https://doi.org/10.1007/s43452-022-00589-0
  76. Mercan, K., Baltacıoglu, A.K. and Civalek, O. (2018), "Free vibration of laminated and FGM/CNT composites annular thick plates with shear deformation by discrete singular convolution method", Compos. Struct., 186, 139-153. https://doi.org/10.1016/j.compstruct.2017.12.008
  77. Meng, F., Pang, A., Dong, X., Han, C. and Sha, X. (2018), "H∞ optimal performance design of an unstable plant under bode integral constraint", Complexity, 2018(1), 4942906. https://doi.org/10.1155/2018/4942906
  78. Meng, F. Wang, D. Yang, P. Xie, G. (2019), "Application of sum of squares method in nonlinear H∞ control for satellite attitude maneuvers", Complexity, 2019(1), 5124108. https://doi.org/10.1155/2019/5124108
  79. Meng, F., Chen, S., Zhang, W., Ou, P., Zhang, J., Chen, C. and Song, J. (2021), "Negative Poisson's ratio in graphene Miura origami", Mech. Mater., 155, 103774. https://doi.org/10.1016/j.mechmat.2021.103774.
  80. Meng, S., Meng, F., Chi, H., Chen, H. and Pang, A. (2023), "A robust observer based on the nonlinear descriptor systems application to estimate the state of charge of lithium-ion batteries", J. Frank. Inst., 360(16), 11397-11413. https://doi.org/10.1016/j.jfranklin.2023.08.037
  81. Meng, S., Meng, F., Zhang, F., Li, Q., Zhang, Y. and Zemouche, A. (2024), "Observer design method for nonlinear generalized systems with nonlinear algebraic constraints with applications, Automatica, 162, 111512. https://doi.org/10.1016/j.automatica.2024.111512.
  82. Nguyen, N.V. and Phan, D.H. (2023), "Nonlinear free vibration of bi-directional functionally graded porous plates", Thin. Wall. Struct., 192, 111198. https://doi.org/10.1016/j.tws.2023.111198
  83. Peng, X., Han, Y., Liu, G., Li, J., Yi, B., Sa, G. and Jiang, S. (2024a), "Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure", Smart. Mater. Struct., 33(7), 075035. https://doi.org/10.1088/1361-665X/ad56e7
  84. Peng, B., Chen, J., Githinji, P.B., Gul, I., Ye, Q., Chen, M., ... and Chen, Z. (2024b), "Practical guidelines for cell segmentation models under optical aberrations in microscopy", Comput. Struct. Biotech. J., 26, 23 - 39. https://doi.org/10.1016/j.csbj.2024.09.002
  85. Pi, X., Yan, D., Xu, Y., Pan, M., Wang, Z., Chang, M. and Qi, Z. (2025), "TLRs signaling pathway regulation, antibacterial and apoptotic activity of largemouth bass ECSIT during Edwardsiella piscicida infection", Aquaculture, 595(2), 741615. https://doi.org/10.1016/j.aquaculture.2024.741615.
  86. Punera, D. and Kant, T. (2021), "An assessment of refined hierarchical kinematic models for the bending and free vibration analyses of laminated and functionally graded sandwich cylindrical panels", J. Sandw. Struct. Mater., 23(6), 2506-2546. https://doi.org/10.1177/1099636220909826.
  87. Qu, Y., Jin, F. and Yang, J. (2021), "Stress-induced electric potential barriers in thickness-stretch deformations of a piezoelectric semiconductor plate", Acta. Mech., 232, 4533-4543. https://doi.org/10.1007/s00707-021-03059-5
  88. Rahbar Ranji, A. and Rostami Hoseynabadi, H. (2012), "A semianalytical technique for bending analysis of cylindrical panels with general loading and boundary conditions", J. Mech. Sci. Tech., 26, 1711-1718. https://doi.org/10.1007/s12206-012-0438-2
  89. Ranjbar, M. and Feli, S. (2019), "Temperature-dependent analysis of axially functionally graded CNT reinforced micro-cantilever beams subjected to low velocity impact", Mech. Adv. Mater. Struct., 26(13), 1154-1168. https://doi.org/10.1080/15376494.2018.1432788
  90. Ray, M.C. (2023), "Exact solutions of elasticity theories for static analysis of doubly curved antisymmetric angle-ply composite shells", Mech. Adv. Mater. Struct., 31(26), 7579-7593. https://doi.org/10.1080/15376494.2023.2246223
  91. Ren, G.J. (1989), "Analysis of simply supported laminated circular cylindrical shell roofs", Compos. Struct., 11, 277-292. https://doi.org/10.1016/0263-8223(89)90092-5.
  92. Ren, H., Xia, X., Sun, Y., Zhai, Y., Zhang, Z., Wu, J., Li, J. and Liu, M. (2024), "Electrolyte engineering for the mass exfoliation of graphene oxide across wide oxidation degrees", J. Mater. Chem. A., 12, 35, 23416-23424. http://doi.org/10.1039/D4TA02654C
  93. Shi, J., Han, D., Chen, C. and Shen, X. (2024), "KTMN: Knowledge-driven Two-stage Modulation Network for visual question answering", Multimed. Syst., 30, 350. https://doi.org/10.1007/s00530-024-01568-6
  94. Song, X., Han, D., Chen, C., Shen, X. and Wu, H. (2024), "Vman: visual-modified attention network for multimodal paradigms", Vis Comput., 1-18. https://doi.org/10.1007/s00371-024-03563-4
  95. Shen, Z., Dong, R., Li, J., Su, Y. and Long, X. (2024), "Determination of gradient residual stress for elastoplastic materials by nanoindentation", J. Manufact. Proc., 109, 359-366. https://doi.org/10.1016/j.jmapro.2023.10.030
  96. Sun, X., Zhang, K., Liu, Q., Bao, M. and Chen, Y. (2024), "Harnessing domain insights: A prompt knowledge tuning method for aspect-based sentiment analysis", Knowl. Based. Syst., 298, 111975. https://doi.org/10.1016/j.knosys.2024.111975.
  97. Singh, A. and Kumari, P., (2020), "Analytical free vibration solution for angle-ply piezolaminated plate under cylindrical bending: A piezo-elasticity approach", Adv. Comput. Design, 5(1), 55-89. https://doi.org/10.12989/acd.2020.5.1.055
  98. Shen, H.S., Reddy, J.N. and Yu, Y. (2021), "Postbuckling of doubly curved FG-GRC laminated panels subjected to lateral pressure in thermal environments", Mech. Adv. Mater. Struct., 28(3), 260-270. https://doi.org/10.1080/15376494.2018.1556827.
  99. Sekkak, M., Zerrouki, R., Zidour, M., Tounsi, A., Bourada, M., Selim, M.M. and Saad, H.A. (2024) "Static analysis of nonlinear FG-CNT reinforced nano-composite beam resting on Winkler/Pasternak foundation", Adv. Nano. Res. 16(5), 509-519. https://doi.org/10.12989/anr.2024.16.5.509.
  100. Sobhani, E., Masoodi, A.R., Civalek, O. and Ahmadi-Pari, A.R. (2022), "Agglomerated impact of CNT vs. GNP nanofillers on hybridization of polymer matrix for vibration of coupled hemispherical-conical-conical shells", Aer. Sci. Tech. 120, 107257. https://doi.org/10.1016/j.ast.2021.107257
  101. Tlidji, Y., Benferhat, R., Daouadji, T.H., Tounsi, A., Cong Trinh, L. (2022), "Free vibration analysis of FGP nanobeams with classical and non-classical boundary conditions using Statespace approach", Adv. Nano. Res. 13(5), 453-463 DOI: https://doi.org/10.12989/anr.2022.13.5.453.
  102. Taj, M. Khadimallah, M.A. Ahmad, M. Hussain, M. Azrar, L. Safeer, M. Ayed, H. Ghandourah, E. and Mouldi, A. (2024), "Nonlocal orthotropic shell model for buckling of microtubules embedded within elastic medium", Adv. Nano. Res., 17(5), 401-408, https://doi.org/10.12989/anr.2024.17.5.401.
  103. Tornabene, F. (2016), "General higher-order layer-wise theory for free vibrations of doubly-curved laminated composite shells and panels", Mech. Adv. Mater. Struct., 23(9), 1046-1067. https://doi.org/10.1080/15376494.2015.1121522
  104. Thai, H.T. and Choi, D.H. (2014), "Improved refined plate theory accounting for effect of thickness stretching in functionally graded plates", Compos. Part B: Eng., 56, 705-716. https://doi.org/10.1016/j.compositesb.2013.09.008.
  105. Vali, H. and Arefi, M. (2023), "Extension of a novel higher order modeling to the vibration responses of sandwich graphene origami cylindrical panel", Arch. Civil. Mech. Eng., 23, 268. https://doi.org/10.1007/s43452-023-00797-2
  106. Wang, C., Su, J. and Liu, T. (2023a), "A sustainable strategy to transform cotton waste into renewable cellulose fiber selfreinforcing composite paper", J. Clean. Prod., 429, 139567. https://doi.org/10.1016/j.jclepro.2023.139567
  107. Wang, K., Boonpratatong, A., Chen, W., Ren, L., Wei, G., Qian, Z., Zhao, D. (2023b), "The fundamental property of human leg during walking: Linearity and nonlinearity", IEEE. T. Neural. Syst. Rehab. Eng., 31, 4871-4881. https://doi.org/10.1109/TNSRE.2023.3339801
  108. Wang, Z., Yuan, Y., Zhang, S., Lin, Y. and Tan, J. (2024a), "A multi-state fusion informer integrating transfer learning for metal tube bending early wrinkling prediction", Appl. Soft. Comput., 151, 110991. https://doi.org/10.1016/j.asoc.2023.110991
  109. Wang, Y., Wang, J., Cai, R., Zhang, J., Xia, S., Li, Z., Yu, C., Wu, J., Wang, P and Wu, Y. (2024b), "Enhanced local CO coverage on cu quantum dots for boosting electrocatalytic CO2 reduction to ethylene", Adv. Funct. Mater., 2417764. https://doi.org/10.1002/adfm.202417764.
  110. Wang, Z. Liao, Z. Zhou, B. Yu G. Luo, W. (2024c), "SwinURNet: hybrid transformer-CNN architecture for real-time unstructured road segmentation," IEEE. T. Instrum. Measur., 73, 1-16, 5035816. https://doi.org/10.1109/TIM.2024.3470042.
  111. Wu, Y., Kang, F., Zhang, Y., Li, X. and Li, H. (2024), "Structural identification of concrete dams with ambient vibration based on surrogate-assisted multi-objective salp swarm algorithm", Structures, 60, 105956. https://doi.org/10.1016/j.istruc.2024.105956
  112. Xiao, Z.Y., Li, Y.J., Zhang, W., Han, Y.J., Li, D., Chen, Q., Zeng, Z.M., Quan, Z.Y. and Xu, X.H. (2022), "Enhancement of torque efficiency and spin Hall angle driven collaboratively by orbital torque and spin-orbit torque", Appl. Phys. Lett., 121(7), 072404. https://doi.org/10.1063/5.0086125
  113. Xie, J., Wen, M., Ding, P., Tu, Y., Wu, D., Liu, K., Tang, K. and Chen, M. (2024), "Interfacial flow contact resistance effect for thermal consolidation of layered viscoelastic saturated soils with semi-permeable boundaries", Int. J. Num. Anal. Meth. Geomech., 48(15), 3640-3679. https://doi.org/10.1002/nag.3805
  114. Xin, J., Xu, W., Cao, B., Wang, T. and Zhang, S. (2024), "A deeplearning-based MAC for integrating channel access, rate adaptation and channel switch", Comput. Sci., Netw. Internet. Arch., arXiv preprint arXiv:2406.02291. https://doi.org/10.48550/arXiv.2406.02291.
  115. Xu, C., Zhu, M., Wang, Q., Cui, J., Huang, Y., Huang, X., ... and Zhang, X. (2023), "TROP2-directed nanobody-drug conjugate elicited potent antitumor effect in pancreatic cancer", J. Nanobiotech., 21, 410. https://doi.org/10.1186/s12951-023-02183-9
  116. Yang, N., Zou, Y. and Arefi, M. (2023), "Bending results of graphene origami reinforced doubly curved shell", Def. Tech., 35, 198-210. https://doi.org/10.1016/j.dt.2023.11.017.
  117. Yan, C., Feng, M., Wu, Z., Guo, Y., Dong, W., Wang, Y. and Mian, A. (2024), "Discriminative correspondence estimation for unsupervised RGB-D point cloud registration", IEEE. T. Circ. Syst. Video. Tech., Early Access. https://doi.org/10.1109/TCSVT.2024.3480268.
  118. Ye, W., Zang, Q., Liu, J., Yang, F. and Lin, G. (2023), "Threedimensional bending and free vibration analyses of laminated cylindrical panel with/without elastic foundation using twodimensional discrete method", Soil. Dyn. Earthq. Eng., 168, 107831. https://doi.org/10.1016/j.soildyn.2023.107831.
  119. Yu, L., Lei, Y., Ma, Y., Liu, M., Zheng, J., Dan, D. and Gao, P. (2021) "A comprehensive review of fluorescence correlation spectroscopy", Front. Phys. 9, 644450. https://doi.org/10.3389/fphy.2021.644450
  120. Yu, Y., Fu, T., Wang, S. and Yang, C. (2025), "Dynamic response of novel sandwich structures with 3D sinusoid-parallel-hybrid honeycomb auxetic cores: The cores based on negative Poisson's ratio of elastic jump", Eur. J. Mech. A Solids, 109, 105449. https://doi.org/10.1016/j.euromechsol.2024.105449.
  121. Zhang, Y. and Zhuang, X. (2018a), "A softening-healing law for self-healing quasi-brittle materials: Analyzing with strong discontinuity embedded approach", Eng. Fract. Mech., 192, 290-306. https://doi.org/10.1016/j.engfracmech.2017.12.018
  122. Zhang, Y. and Zhuang, X. (2018b), "Cracking elements: A selfpropagating Strong Discontinuity embedded Approach for quasi-brittle fracture", Finite. Elem. Anal. Des., 144, 84-100. https://doi.org/10.1016/j.finel.2017.10.007
  123. Zhang, Y. and Zhuang, X. (2019), "Cracking elements method for dynamic brittle fracture", Theor. Appl. Fract. Mech., 102, 1-9. https://doi.org/10.1016/j.tafmec.2018.09.015
  124. Zhang, Y. and Mang, H.A. (2020), "Global cracking elements: A novel tool for Galerkin-based approaches simulating quasibrittle fracture", Int. J. Numer. Meth. Eng., 121(11), 2462-2480. https://doi.org/10.1002/nme.6315
  125. Zhang, Y. (2017), "Multi-slicing strategy for the threedimensional discontinuity layout optimization (3D DLO)", Int. J. Numer. Anal. Meth. Geomech. 41(4), 488-507. https://doi.org/10.1002/nag.2566
  126. Zhang, Y., Zeiml, M., Pichler, C. and Lackner, R. (2014), "Modelbased risk assessment of concrete spalling in tunnel linings under fire loading", Eng. Struct., 77, 207-215. https://doi.org/10.1016/j.engstruct.2014.02.033
  127. Zhang, Y., Lackner, R., Zeiml, M. and Mang, H.A. (2015), "Strong discontinuity embedded approach with standard SOS formulation: Element formulation, energy-based crack-tracking strategy, and validations", Comput. Meth. Appl. Mech. Eng., 287, 335-366. https://doi.org/10.1016/j.cma.2015.02.001.
  128. Zhang, Y., Zhuang, X. and Lackner, R. (2018), "Stability analysis of shotcrete supported crown of NATM tunnels with discontinuity layout optimization", Int. J. Numer. Anal. Meth. Geomech., 42(11), 1199-1216. https://doi.org/10.1002/nag.2775
  129. Zhang, Y., Gao, Z., Li, Y. and Zhuang, X. (2020), "On the crack opening and energy dissipation in a continuum based disconnected crack model", Finite. Elem. Anal. Des., 170, 103333. https://doi.org/10.1016/j.finel.2019.103333
  130. Zhang, Y., Yang, X., Wang, X. and Zhuang, X. (2021a), "A micropolar peridynamic model with non-uniform horizon for static damage of solids considering different nonlocal enhancements", Theor. Appl. Fract. Mech., 113, 102930. https://doi.org/10.1016/j.tafmec.2021.102930
  131. Zhang, Y., Huang, J., Yuan, Y. and Mang, H.A. (2021b), "Cracking elements method with a dissipation-based arc-length approach", Finite. Elem. Anal. Des., 195, 103573. https://doi.org/10.1016/j.finel.2021.103573
  132. Zhang, Y., Gao, Z., Wang, X. and Liu, Q. (2022a), "Predicting the pore-pressure and temperature of fire-loaded concrete by a hybrid neural network", Int. J. Comput. Meth., 19(8), 2142011. https://doi.org/10.1142/S0219876221420111
  133. Zhang, Y., Wang, X., Wang, X. and Mang, H.A. (2022b), "Virtual displacement based discontinuity layout optimization", Int. J. Numer. Meth. Eng., 123(22), 5682-5694. https://doi.org/10.1002/nme.7084
  134. Zhang, Y., Gao, Z., Wang, X. and Liu, Q. (2023a), "Image representations of numerical simulations for training neural networks", Comput. Model. Eng. Sci., 134(2), 821-833. https://doi.org/10.32604/cmes.2022.022088
  135. Zhang, M., Jiang, X. and Arefi, M. (2023b), "Dynamic formulation of a sandwich microshell considering modified couple stress and thickness-stretching", Eur. Phys. J. Plus. 138, 227. https://doi.org/10.1140/epjp/s13360-023-03753-4
  136. Zhang, K., Ye, Z., Qi, M., Cai, W., Saraiva, J.L., Wen, Y., Liu, G., Zhu, Z., Zhu, S. and Zhao, J. (2024a), "Water quality impact on fish behavior: A review from an aquaculture perspective", Rev. Aquaculture, 17(1), e12985. https://doi.org/10.1111/raq.12985.
  137. Zhang, X., Chen, H., Wang, Y., Gao, X., Wang, Z., Wang, N. and Zang, D. (2024b), "Ultrasound induced grain refinement of crystallization in evaporative saline droplets", Ultrason. Sonochem., 107, 106938, https://doi.org/10.1016/j.ultsonch.2024.106938.
  138. Zhang, H.H., Chao, J.B., Wang, Y.W., Liu, Y., Yao, H.M., Zhao, Z.P. and Niu, K. (2024c), "5G base station antenna array with heatsink radome", IEEE T. Antenn. Propag., 72(3), 2270-2278 https://doi.org/10.1109/TAP.2024.3358378.
  139. Zhang, T., Xu, S. and Zhang, W. (2024d), "New approach to feedback stabilization of linear discrete time-varying stochastic systems", IEEE. T. Auto. Control, Early Access. https://doi.org/10.1109/TAC.2024.3482119.
  140. Zhao, S. Zhang, Y. Zhang, Y. Yang, J. Kitipornchai, S. (2021), "Graphene origami-enabled auxetic metallic metamaterials: An atomistic insight", Int. J. Mech. Sci., 212, 106814. https://doi.org/10.1016/j.ijmecsci.2021.106814.
  141. Zhao, Z., Zhang, H., Shiau, J., Du, W., Ke, L., Wu, F. and Bao, X. (2024), "Failure envelopes of rigid tripod pile foundation under combined vertical-horizontal-moment loadings in clay", Appl. Ocean. Res., 150, 104131. https://doi.org/10.1016/j.apor.2024.104131
  142. Yu, X., Feng, B., Yao, M., Peng, J. and Yang, S. (2024), "Recent progress in modular electrochemical synthesis of hydrogen and high-value-added chemicals based on solid redox mediator", Small, 2310573. https://doi.org/10.1002/smll.202310573
  143. Shi, X., Zhang, Y., Pujahari, A. and Mishra, S.K. (2025), "When latent features meet side information: A preference relation based graph neural network for collaborative filtering", Exp. Syst. Appl., 260, 125423. https://doi.org/10.1016/j.eswa.2024.125423
  144. Xiao, Y., Yang, Y., Ye, D. and Zhang, J. (2024a), "Quantitative precision second-order temporal transformation based pose control for spacecraft proximity operations," IEEE. T. Aeros. Elect. Syst., Early Access. https://doi.org/10.1109/TAES.2024.3469167.
  145. Xiao, Y., Yang, Y., Ye, D. and Zhao, Y. (2024b), "Scalingtransformation based attitude tracking control for rigid spacecraft with prescribed time and prescribed bound", IEEE. T. Aeros. Elect. Syst., Early Access. https://doi.org/10.1109/TAES.2024.3451454.
  146. Xinde, L.I., Dunkin, F. and Dezert, J. (2024), "Multi-source information fusion: Progress and future", Chinese J. Aeronaut., 37(7), 24-58. https://doi.org/10.1016/j.cja.2023.12.009
  147. Xue, W., Xu, C., Zhang, K., Cui, L., Huang, X., Nan, Y., Ju. D., Chang, X. and Zhang, X. (2024), "Enhancing antitumor efficacy of CLDN18.2-directed antibody-drug conjugates through autophagy inhibition in gastric cancer", Cell Death Discov., 10, 393. https://doi.org/10.1038/s41420-024-02167-0
  148. Xu, C., Huang, X., Hu, Q., Xue, W., Zhou, K., Li, X., ... and Zhang, X. (2024a), "Modulating autophagy to boost the antitumor efficacy of TROP2-directed antibody-drug conjugate in pancreatic cancer", Biomed. Pharmacotherapy., 180, 117550. https://doi.org/10.1016/j.biopha.2024.117550
  149. Xu, W., Aponte, E. and Vasanthakumar, P. (2024b), "The property (ωπ) (\omega{ \pi }) as a generalization of the a-Weyl theorem[J]", AIMS Math., 9(9), 25646-25658. https://doi.org/10.3934/math.20241253