DOI QR코드

DOI QR Code

Aerodynamic design and optimization of a multi-stage axial flow turbine using a one-dimensional method

  • Xinyang Yin (School of Energy and Power, Dalian University of Technology) ;
  • Hanqiong Wang (School of Energy and Power, Dalian University of Technology) ;
  • Jinguang Yang (School of Energy and Power, Dalian University of Technology) ;
  • Yan Liu (School of Energy and Power, Dalian University of Technology) ;
  • Yang Zhao (Shenyang Blower Works Group Corporation) ;
  • Jinhu Yang (Qingdao Institute of Aeronautical Technology)
  • 투고 : 2023.03.06
  • 심사 : 2023.06.05
  • 발행 : 2023.05.25

초록

In order to improve aerodynamic performance of multi-stage axial flow turbines used in aircraft engines, a one-dimensional aerodynamic design and optimization framework is constructed. In the method, flow path is generated by solving mass continuation and energy conservation with loss computed by the Craig & Cox model; Also real gas properties has been taken into consideration. To obtain an optimal result, a multi-objective genetic algorithm is used to optimize the efficiencies and determine values of various design variables; Final design can be selected from obtained Pareto optimal solution sets. A three-stage axial turbine is used to verify the effectiveness of the developed optimization framework, and designs are checked by three-dimensional CFD simulation. Results show that the aerodynamic performance of the optimized turbine has been significantly improved at design point, with the total-to-total efficiency increased by 1.17% and the total-to-static efficiency increased by 1.48%. As for the off-design performance, the optimized one is improved at all working points except those at small mass flow.

키워드

과제정보

The 1st author owes thanks to Mr. Li Zhi for his help on using the blade design program, and the 6th author would like to acknowledge the support by the Taishan Scholars Program.

참고문헌

  1. Agromayor, R. and Nord, L.O. (2019), "Preliminary design and optimization of axial turbines accounting for diffuser performance", Int. J. Turbomach. Propuls. Power, 4(3), 32. https://doi.org/10.3390/ijtpp4030032.
  2. Aponte, R.D., Teran, L.A., Grande, J.F., Coronado, J.J., Ladino, J.A., Larrahondo, F.J. and Rodriguez, S.A. (2020), "Minimizing erosive wear through a CFD multi-objective optimization methodology for different operating points of a Francis turbine", Renew. Energy, 145, 2217-2232. https://doi.org/10.1016/j.renene.2019.07.116.
  3. Craig, H.R.M. and Cox, H.J.A. (1970), "Performance estimation of axial flow turbines", Proc. Inst. Mech. Eng., 185(1), 407-424. https://doi.org/10.1243/PIME_PROC_1970_185_048_02
  4. Feng, H., Chen, L., Tang, W. and Ge, Y. (2022), "Optimal design of a dual-pressure steam turbine for rankine cycle based on constructal theory", Energi., 15(13), 4854. https://doi.org/10.3390/en15134854.
  5. Ghisu, T., Parks, G.T., Jarrett, J.P. and Clarkson, P.J. (2006), "Multi-objective optimisation of aero-engine compressors", Third International Conference 'The Future of Gas-Turbine Technology', European Turbine Network (ETN).
  6. Jiang, X. (2019), "Design and performance analysis of axial turbine with real working fluid", Dalian University of Technology, China.
  7. Li, X., Huo, Y., Xu, H., Liu, Y., Li, G., Niu, X., Zhu, X. and Li, Y. (2023), "Aerodynamic design and optimization of power turbine for marine gas turbine", Propuls. Technol., 44(02), 143-151.
  8. Li, Z. and Zheng, X. (2017), "Review of design optimization methods for turbomachinery aerodynamics", Progr. Aerosp. Sci., 93, 1-23. https://doi.org/10.1016/j.paerosci.2017.05.003
  9. Li, Z., Liu, Y., Yang, J.G. and Wang, H.Q. (2022), "A data-based policy model for intelligent turbine cascade design", J. Appl. Fluid Mech., 15(4), 1179-1192. https://doi.org/10.47176/JAFM.15.04.33515.
  10. Nishi, Y., Mori, N., Yamada, N. and Inagaki, T. (2022), "Study on the design method for axial flow runner that combines design of experiments, response surface method, and optimization method to one-dimensional design method", Renew. Energy, 185, 96-110. https://doi.org/10.1016/j.renene.2021.12.009.
  11. Numeca Int. (2009), Numeca User Manuals, NUMECA International, Belgium.
  12. Poles S. (2003), "MOGA-II an improved multi-objective genetic algorithm", Esteco technical Report, 6.
  13. Rao, S.S. and Gupta, R.S. (1980), "Optimum design of axial flow gas turbine stage-Part I: Formulation and analysis of optimization problem", J. Eng. Power, 102(4), 782-789. https://doi.org/10.1115/1.3230341.
  14. Rao, S.S. and Gupta, R.S. (1980), "Optimum design of axial flow gas turbine stage-Part II: Solution of the optimization problem and numerical results", J. Eng. Power, 102(4), 790-797. https://doi.org/10.1115/1.3230342.
  15. Tang, X., Luo, L., Wen, F., Zhou, X. and Wang, S. (2016), "3-D Aerodynamic optimization design of air-cooled turbine with transonic blade", Turbine Technol., 58(06), 405-409.
  16. Zhang, C. and Janeway, M. (2022), "Optimization of turbine blade aerodynamic designs using CFD and neural network models", Int. J. Turbomach. Propuls. Power, 7(3), 20. https://doi.org/10.3390/ijtpp7030020.
  17. Zhang, M., Liu, Y., Yang, J., Jiang, X., Shao, W. and Wang, X. (2021), "Design and analysis of a multi-stage axial turbine for gasified coal-water power system", Int. J. Energy Res., 45(5), 7352-7365. https://doi.org/10.1002/er.6319.
  18. Zhdanov, I., Staudacher, S. and Falaleev, S. (2013), "An advanced usage of mean-line loss systems for axial turbine design optimization", Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. Volume 6A: Turbomachinery. San Antonio, Texas, USA. June.