Advances in materials Research

  • 제12권4호
  • /
  • Pages.273-286
  • /
  • 2023
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study of the fracture behavior of different structures by the extended finite element method (X-FEM)

  • 투고 : 2022.03.24
  • 심사 : 2023.05.10
  • 발행 : 2023.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The fracture mechanics make it possible to characterize the behavior with cracking of structures using parameters quantifiable in the sense of the engineer, in particular the stress field, the size of the crack, and the resistance to cracking of the material. Any structure contains defects, whether they were introduced during the production of the part (machining or molding defects for example). The aim of this work is to determine numerically by the finite element method the stress concentration factor Kt of a plate subjected to a tensile loading containing a lateral form defect with different sizes: a semicircle of different radii, a notch with different opening angles and a crack of different lengths. The crack propagation is then determined using the extended finite element technique (X-FEM). The modeling was carried out using the ABAQUS calculation code.

키워드

참고문헌

  1. Benzaama, A., Mokhtari, M., Benzaama, H., Gouasmi, S. and Tamine, T. (2018), "Using XFEM technique to predict the damage of unidirectional CFRP composite notched under tensile load", Adv. Aircraft Spacecraft Sci., 5(1), 129. https://doi.org/10.12989/aas.2018.5.1.129.
  2. Campilho, R. and Moreira, F. (2019), "Use of the XFEM for the design of adhesively-bonded Tjoints", Frattura ed Integrita Strutturale, 13(49), 435-449. https://doi.org/10.3221/IGF-ESIS.49.40.
  3. D'Angela, D. and Ercolino, M. (2021), "Fatigue crack growth in metallic components: Numerical modelling and analytical solution", Struct. Eng. Mech., 79(5), 541-556. https://doi.org/10.12989/sem.2021.79.5.541.
  4. Dordevic, B., Sedmak, S., Tanaskovic, D., Gajin, M. and Vucetic, F. (2021), "Failure analysis and numerical simulation of slab carrying clamps", Frattura ed Integrita Strutturale, 15(55), 336-344. https://doi.org/10.3221/IGF-ESIS.55.26.
  5. Gasmi, B., Abderrahmene, S., Smail, B. and Benaoumeur, A. (2019), "Initiation and propagation of a crack inthe orthopedic cement of a THR using XFEM", Adv. Comput. Des., 4(3), 295-305. https://doi.org/10.12989/acd.2019.4.3.295.
  6. Huang, X., Liu, Y., Huang, X. and Dai, Y. (2017), "Crack arrest behavior of central-cracked stiffened plates under uniform tensions", Int. J. Mech. Sci., 133, 704-719. https://doi.org/10.1016/j.ijmecsci.2017.09.040.
  7. Huang, Z., Deng, S., Li, H. and Zuo, H. (2019), "Edge crack growth of mortar plate specimens under uniaxial loading tests", J. Rock Mech. Geotech. Eng., 11(2), 300-313. https://doi.org/10.1016/j.jrmge.2018.12.005.
  8. Karamloo, M., Mazloom, M. and Ghasemi, A. (2019), "An overview of different retrofitting methods for arresting cracks in steel structures", Struct. Monit. Mainten., 6(4), 291-315. https://doi.org/10.12989/smm.2019.6.4.291.
  9. Khatri, K. and Lal, A. (2018), "Stochastic XFEM based fracture behavior and crack growth analysis of a plate with a hole emanating cracks under biaxial loading", Theor. Appl. Fract. Mech., 96, 1-22. https://doi.org/10.1016/j.tafmec.2018.03.009.
  10. Kozlowski, M., Kadela, M. and Gwozdz-Lason, M. (2016), "Numerical fracture analysis of foamed concrete beam using XFEM method", Appl. Mech. Mater., 837, 183-186. https://doi.org/10.4028/www.scientific.net/AMM.837.183.
  11. Mischinski, S. and Ural, A. (2013), "Interaction of microstructure and microcrack growth in cortical bone: a finite element study", Comput. Meth. Biomech. Biomed. Eng., 16, 81-94. https://doi.org/10.1016/10.1080/10255842.2011.607444.
  12. Nassiraei, H. and Rezadoost, P. (2020), "Stress concentration factors in tubular T/Y-joints strengthened with FRP subjected to compressive load in offshore structures", Int. J. Fatig., 140, 105719. https://doi.org/10.1016/j.ijfatigue.2020.105719.
  13. Nassiraei, H. and Rezadoost, P. (2021), "Parametric study and formula for SCFs of FRP-strengthened CHS T/Y-joints under out-of-plane bending load", Ocean Eng., 221, 108313. https://doi.org/10.1016/j.oceaneng.108313.
  14. Nassiraei, H. and Rezadoost, P. (2021), "SCFs in tubular X-connections retrofitted with FRP under in-plane bending load", Compos. Struct., 274, 114314. https://doi.org/10.1016/j.compstruct.2021.114314.
  15. Nassiraei, H. and Rezadoost, P. (2021), "SCFs in tubular X-joints retrofitted with FRP under out-of-plane bending moment", Marine Struct., 79, 103010. https://doi.org/10.1016/j.marstruc.2021.103010.
  16. Nassiraei, H. and Rezadoost, P. (2021), "Stress concentration factors in tubular X-connections retrofitted with FRP under compressive load", Ocean Eng., 229, 108562. https://doi.org/10.1016/j.oceaneng.2020.108562.
  17. Nassiraei, H. and Rezadoost, P. (2022), "Stress concentration factors in tubular T-joints reinforced with external ring under in-plane bending moment", Ocean Eng., 266, 112551. https://doi.org/10.1016/j.oceaneng.2022.112551.
  18. Nguyen, T.K., Phan, D.H., Phan, T.T. and Phan, A.V. (2018), "Symmetric Galerkin boundary element analysis of the interaction between multiple growing cracks in infinite domains", Arch. Appl. Mech., 88, 2003-2016. https://doi.org/10.1007/s00419-018-1430-6.
  19. Pathak, H., Singh, A., Singh, I.V. and Yadav, S.K. (2013), "A simple and efficient XFEM approach for 3-D cracks simulations", Int. J. Fract., 181, 189-208. https://doi.org/10.1007/s10704-013-9835-2.
  20. Pereira, S.A.G., Tavares, S.M. and de Castro, P.M. (2019), "Mixed mode fracture: Numerical evaluation and experimental validation using PMMA specimens", Frattura ed Integrita Strutturale, 13(49), 412-428. https://doi.org/10.3221/IGF-ESIS.49.40.
  21. Sedmak, A. (2016), "Fatigue life prediction of casing welded pipes by using the extended finite element method", Frattura ed Integrita Strutturale, 10(36), 46-54. https://doi.org/10.3221/IGF-ESIS.36.05.
  22. Srivastava, A.K., Arora, P.K. and Kumar, H. (2016), "Numerical and experiment fracture modeling for multiple cracks of a finite aluminum plate", Int. J. Mech. Sci., 110, 1-13. https://doi.org/10.1016/j.ijmecsci.2016.02.010.
  23. Taghezout, A., Mostefa, B., Djebli, A., Abdelkarim, A. and Khellafi, H. (2020), "Experimental and numerical fracture modeling using XFEM of aluminum plates", Int. J. Eng. Res. Africa, 46, 45-52. https://doi.org/10.4028/www.scientific.net/JERA.46.45.
  24. Yoon, Y.J. and Cowin, S.C. (2008), "An estimate of anisotropic poroelastic constants of an osteon", Biomech. Model. Mechanobiol., 7(1), 13-26. https://doi.org/10.1016/10.1007/s10237-006-0071-9.