참고문헌
- Ahn, J.K., 2022. A sudy on iprovement for geenship certification scheme to achieve net-zero. Journal of the Society of Naval Architects of Korea, 59(6), pp.372-384. https://doi.org/10.3744/SNAK.2022.59.6.372
- Constantine, S., Hernandez, P. and Gallagher, C., 2016. Natural gas as a bridge fuel - measuring the bridge. Center for Sustainable Energy, pp.1-12.
- Hwang, S.S., Gil, S.J., Lee, G.N., Lee, J.W., Park. H., Jung, K.H. and Suh, S.B., 2020. Life cycle assessment of alternative ship fuels for coastal ferry operating in Republic of Korea. Journal of Marine Science and Engineering, 8(660), pp.1-18. https://doi.org/10.3126/jsce.v8i0.32857
- Hwang, S., Jeong, B., Jung, K., Kim, M. and Zhou, P., 2019. Life cycle assessment of LNG fueled vessel in domestic services. Journal of Marine Science and Engineering, 7(359), pp.1-25. https://doi.org/10.3390/jmse7100359
- International Organization for Standardization (ISO), 1997. Environmental management - Life cycle assessment - Principle and framework, ISO 14040.
- IMO, 2015. International code of safety for ships using gases or other low-flashpoint fuels (IGF Code), IMO, 1 PREAMBLE.
- IMO, 2017. SOLAS 2017 Amendment (98th) / Chapter II-1 / Reg. 7-1, 7-2.
- IMO, 2015. Third IMO greenhouse gas study 2014 - executive summary and final report.
- Kim, T.W., Suh, Y.S., Jang, K.B., Chun, M.S., Lee, K.D. and Cha, K.H., 2012. A study and design on tank container for fuel tank of LNG fueled ship. Journal of the Society of Naval Architects of Korea, 49(6), pp.504-511. https://doi.org/10.3744/SNAK.2012.49.6.504
- Korean Register R&D Division, 2020. Forecasting the Alternative Marine Fuel: Ammonia.
- Lee, D.K., Jung, K.S., Oh, D.K. and Kim, B.I., 2017, A study on the case of life cycle assessment for a sustainable design of a composite small craft. Journal of the Korean Society for Precision Engineering, 34(11), pp.835-841. https://doi.org/10.7736/KSPE.2017.34.11.835
- Lee, D.K. and Park, B.Y., 2021. A case study on the sustainability for a stanchion of recreational crafts based on the design for additive manufacturing using a FFF-type 3D Printer. Journal of the Society of Naval Architects of Korea, 58(5), pp.294-302. https://doi.org/10.3744/SNAK.2021.58.5.294
- Ventura, M., 2011. Estimation methods for basic ship design, MSc in Marine Engineering and Naval Architecture, Course Note, Instituto Superior Tecnico, Technical University of Lisbon, Portugal.
- World Steel Association, 2018. Life cycle inventory study - 2018 data release.