DOI QR코드

DOI QR Code

A Study on Optimal Design of Mud Tank with Response Surface Optimization

반응표면 최적화를 이용한 머드탱크 최적 설계에 관한 연구

  • In-hyuk Nam (Dept. of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Im-jun Ban (Dept. of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Chaeog Lim (Dept. of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Sung-chul Shin (Dept. of Naval Architecture & Ocean Engineering, Pusan National University)
  • 남인혁 (부산대학교 조선해양공학과) ;
  • 반임준 (부산대학교 조선해양공학과) ;
  • 임채옥 (부산대학교 조선해양공학과) ;
  • 신성철 (부산대학교 조선해양공학과)
  • Received : 2023.09.05
  • Accepted : 2023.10.04
  • Published : 2023.10.31

Abstract

Mud tanks used for storing and supplying mud in mud supply systems are essential to secure structural stability according to the mud loads inside the tank. In terms of structural stability of the mud tank can be ensured by increasing the thickness of the structure. However, increasing the thickness may cause a problem of increasing production costs. In addition, this increases the weight of the tank, which can cause problems with the trailer loading weight limitation during transportation. To satisfy both these problems and structural stability, the mud tank should be optimally designed. Therefore, this study conducted an optimum design in consideration of the load of the mud tank through the structural analysis and response surface optimization method in ANSYS.

Keywords

Acknowledgement

이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

  1. 반임준, 한국산업융합학회논문집, 23, 6, 1033, (2020).
  2. TSNE FEA사업부 : ANSYS 18.0 MECHANICAL, (2017).
  3. 이상현, 한국전산구조공학회논문집, 30, 1, 39, (2017).
  4. 홍경진, 대한기계학회논문집 A권, 24, 6, 1408, (2000).
  5. Paik, J.K. : Ultimate limit state analysis and design of plated structures. 2nd ED., John Wiley & Sons, Hoboken, pp.9-10, (2018).
  6. 이주희, 대한기계학회논문집 B권, 29, 10, 1163, (2005).
  7. 박정선, 한국항공운항학회, 13, 3, 22, (2005).