Earthquakes and Structures

  • 제25권5호
  • /
  • Pages.359-367
  • /
  • 2023
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimum position for outriggers of different materials in a high- rise building

  • Nikhil Y. Mithbhakare (Department of Civil Engineering, K.E. Society's, Rajarambapu Institute of Technology) ;
  • Popat D. Kumbhar (Department of Civil Engineering, K.E. Society's, Rajarambapu Institute of Technology)
  • 투고 : 2020.09.21
  • 심사 : 2023.10.05
  • 발행 : 2023.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

High-rise structures are considered as symbols of economic power and leadership. Developing countries like India are also emerging as centers for new high-rise buildings (HRB). As the land is expensive and scarce everywhere, construction of tall buildings becomes the best solution to resolve the problem. But, as building's height increases, its stiffness reduces making it more susceptible to vibrations due to wind and earthquake forces. Several systems are available to control vibrations or deflections; however, outrigger systems are considered to be the most effective systems in improving lateral stiffness and overall stability of HRB. In this paper, a 42-storey RCC HRB is analyzed to determine the optimum position of outriggers of different materials. The linear static analysis of the building is performed with and without the provision of virtual outriggers of reinforced cement concrete (RCC) and pre-stressed concrete (PSC) at different storey levels by response spectrum method using finite element based Extended3D Analysis of building System (ETABS) software for determining responses viz. storey displacement, base shear and storey drift for individual models. The maximum allowable limit and percentage variations in earthquake responses are verified using the guidelines of Indian seismic codes. Results indicate that the outriggers contribute in significantly reducing the storey displacement and storey drift up to 28% and 20% respectively. Also, it is observed that the PSC outriggers are found to be more efficient over RCC outriggers. The optimum location of both types of outriggers is found to be at the mid height of building.

키워드

과제정보

The authors are thankful to the Director of Rajarambapu Institute of Technology (RIT), Rajaramnagar, Head of the Structural Engineering program and Head of the Civil Engineering Department of RIT for encouraging and providing required resources for carrying out this study.

참고문헌

  1. Bhati, S.I., Dode P.A. and Barbude P.R. (2016), "Analysis of high-rise building with outrigger structural system", Int. J. Current Trend. Eng. Res., 2(5), 421-433.
  2. Dahake, H.B. and Azghar, M.I.M. (2019), "Optimum position of outrigger systems in tall building by using reinforced concrete shear walls and braces", Int. J. Innov. Res. Sci. Eng. Technol., 18(5), 5810-5817. https://doi.org/10.15680/IJIRSET.2019.0805111.
  3. Dedeoglu, I.O. and Calayir, Y. (2020), "Effectiveness of outrigger and belt truss systems on the seismic behavior of high-rise buildings", J. Struct. Eng. Appl. Mech., 3(3), 180-203. https://doi.org/10.31462/jseam.2020.03180203.
  4. Gadkari, A.P. and Gore, N.G. (2016), "Review on behavior of outrigger structural system in high-rise building", Int. J. Eng. Dev. Res., 4(2), 2065-2073.
  5. Herath, N., Haritos, N., Ngo, T. and Mendis, P. (2009), "Behavior of outrigger beams in high rise buildings under earthquake loads", Australian Earthquake Engineering Society 2009 Conference, Newcastle, New South Wales, Australia, December.
  6. IS:1893 (2016), Part-1, Criteria for Earthquake Resistant Design of Structures, Bureau of Indian Standards, New Delhi, India.
  7. IS:456 (2000), Plain and Reinforced Concrete Code of Practice, Bureau of Indian Standards, New Delhi, India.
  8. IS:875 (2015), Part 3, Design Loads (Other than Earthquake) for Buildings and Structures- Code of Practice (3rd Revision), Bureau of Indian Standards, New Delhi, India.
  9. Kakde, P.A. and Desai, R. (2017), "Comparative study of outrigger and belt truss structural system for steel and concrete material", Int. Res. J. Eng. Technol., 4(5), 142-147.
  10. Kala, A., Mangulkar, M. and Jain, I. (2016), "Optimum position of outrigger with belt truss in tall building under horizontal load", Int. J. Recent Adv. Eng. Technol., 4(3), 39-41.
  11. Kamgar, R. and Rahgozar, R. (2015), "Determination of optimum location for flexible outrigger systems in non-uniform tall buildings using energy method", Int. J. Opt. Civil Eng., 5(4), 433-444. https://doi.org/10.1007/s13296-014-0172-8.
  12. Khade, R.B. and Kulkarni, P.M. (2019), "Effect of wind load on structural performance of dimensionally regular & irregular high-rise buildings with different outrigger systems", Int. J. Eng. Manag. Res., 9(4), 2019, 25-29. https://doi.org/10.31033/ijemr.9.4.5.
  13. Mithbhakare, N.Y. and Kumbhar, P.D. (2020), "Review on behavior of outrigger system in high rise building", Int. Res. J. Eng. Technol., 7(4), 1990-1994.
  14. Mohammed, S.S., Khaja, M.M. and Mohammed, M. (2022), "Dynamic analysis of high-rise structures with outrigger structural system subjected to lateral loads", IOP Conf. Ser.: Earth Environ. Sci., 1026, 012010. https://doi.org/10.1088/1755-1315/1026/1/012010.
  15. Mulla, A.K. and Srinivas B.N. (2015), "A Study on outrigger system in a tall RC structure with steel bracing", Int. J. Eng. Res. Technol., 4(7), 551-557.
  16. Nanduri, P.M.B.R.K., Suresh, B. and Hussain, M.I. (2013), "Optimum position of outrigger system for High-Rise reinforced concrete buildings under wind and earthquake loadings", Am. J. Eng. Res., 2(8), 76-89.
  17. Sandeep, T. (2015), "Importance of storey drift ratio, ductility and performance point levels on multi story building with and without infills", Int. J. Adv. Eng. Res. Dev., 6(2), 703-716. https://doi.org/10.13140/rg.2.2.23937.51042.
  18. Sathyanarayanan, K.S., Vijay A. and Balachandar, S. (2012), "Feasibility studies on the use of outrigger system for RC core frames", Int. J. Adv. Innov. Thoughts Ideas, 1(3), 1-9.
  19. Vasudev, V.M. and Vinay, P.S. (2016), "Performance study for optimum location of multi-outrigger and belt truss system in tall structures", Int. J. Sci. Res. Dev., 4(7), 47-51.
  20. Wang, A.J. (2017), "Experimental studies into a new type of hybrid outrigger system with metal dampers", Struct. Eng. Mech., 64(2), 183-194. https://doi.org/10.12989/sem.2017.64.2.183.
  21. Willford, M.R. and Smith, R.J (2008). "Performance-based seismic and wind engineering for 60 story twin towers in manila", The 14th World Conference on Earthquake Engineering, Beijing, China, October.