대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제39권10호
  • /
  • Pages.235-242
  • /
  • 2023
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

겹침이음실험을 통한 삼중나노소재 혼입 철근콘크리트보의 부착성능에 대한 실험적 고찰

An Experimental Study of the Bond Performance on Reinforced Concrete Beams with Triple Nanomaterials in Lap Splices

  • 유진규 (한양대학교 대학원 건축공학과 ) ;
  • 손동희 (한양대학교 대학원 건축공학과) ;
  • 배백일 (한양사이버대학교 디지털건축도시공학과) ;
  • 유창기 (한양대학교 대학원 건축공학과 ) ;
  • 최창식 (한양대학교 건축공학부 )
  • Jin-Gue Ryu (Dept. of Architectural Engineering, Hanyang University) ;
  • Dong-Hee Son (Dept. of Architectural Engineering, Hanyang University) ;
  • Baek-Il Bae (Dept. of Digital Architectural and Urban Engineering, Hanyang Cyber University) ;
  • Chang-Gi Yoo (Dept. of Architectural Engineering, Hanyang University) ;
  • Chang-Sik Choi (Dept. of Architectural Engineering, Hanyang University)
  • 투고 : 2023.07.26
  • 심사 : 2023.09.21
  • 발행 : 2023.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to assess the impact of combining triple hybrid reinforced concrete with carbon nanotubes, nanosilica, and graphene oxide on bond strength. The mechanical properties of these materials were evaluated through material testing and assessed bond strength via lap-splice experiments. The material testing revealed that nano-reinforced concrete had a slight increase in compressive strength compared to regular concrete but showed a significant improvement in splitting tensile strength. It also exhibited decreased volumetric strain and Poisson's ratio. To understand if these mechanical properties influenced bond strength, laboratory splice experiments were conducted using eight reinforced concrete specimens, varying splice length and cover thickness. The results of the lap-splice experiment showed variations in bond strength depending on the inclusion of nanomaterials in the mixture, with varying increases in bond strength as splice strength changed. This suggests that the combination of these triple nanomaterials does impact the bond performance of concrete.

키워드

과제정보

이 논문은 2023년도 정부 (과학기술정보통신부) 연구비 지원에 의한 결과의 일부임. (과제번호 : RS-2023-00207763, NRF-2022R1A2C3008940)

참고문헌

  1. ACI 318-19. (2019). Building Code Requirements for Concrete Thin Shells and Commentary, ACI Committee 318, American Concrete Institute, Farmington Hills, Mich.
  2. ACI 408R-03. (2003). Bond and Development of Straight Reinforcing Bars in Tension, ACI Committee 408, American Concrete Institute, Farmington Hills, Mich.
  3. Azizinamini, A., Stark, M., Roller, J. J., & Ghosh, S. K. (1993). Bond Performance of Reinforcing Bars Embedded in High-Strength Concrete. ACI Structural Journal, Volume 90, No. 5, pp.554-561.
  4. Hwangbo, D. S., Son, D. H., Suh, H. W., Sung, J. B., Bae, B. I., Bae, S. C., So, H. Y., & Choi, C. S. (2023). Effect of nanomaterials (carbon nanotubes, nano-silica, graphene oxide) on bond behavior between concrete and reinforcing bars. Case Studies in Construction Materials, Volume 18.
  5. Korean Agency for Technology and Standard. (KATS). (2017). Test Pieces for Tensile Test for Metallic Materials, KS B 0801.
  6. Korean Agency for Technology and Standard. (KATS). (2018). Method of Tensile Test for Metallic Materials, KS B 0802.
  7. Korean Agency for Technology and Standard. (KATS). (2017). Standard Test Method for Making and Curing Concrete Specimens, KS F 2403.
  8. Korean Agency for Technology and Standard. (KATS). (2017). Standard Test Method for Compressive Strength of Concrete, KS F 2405.
  9. Korean Agency for Technology and Standard. (KATS). (2017). Standard Test Method for Tensile Splitting Strength of Concrete, KS F 2423.
  10. Korea construction standards center. (2022). Korea Design Standard(KDS) Concrete Design Code 14 20, KDS 14 20.
  11. Lutz, L. A., & Gergely, P. (1967, November). Mechanics of bond and slip of deformed bar in concrete. In Journal Proceeding, Volume 64, No.11, pp.711-721. https://doi.org/10.14359/7600
  12. Mohamed H. .H., Bilal S. H. & Ahmad A. R. (2004). Effect of confinement on bond strength between steel bars and concrete. ACI Structural Journal, Volume 101, No.5.
  13. Son, D. H., Hwangbo, D. S., Suh, H. W., Bae, B. I., Bae, S. C., & Choi, C. S. (2023). Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution. Case Studies in Construction Materials, Volume 18.
  14. Tepfers, R. (1979). Cracking of concrete cover along anchored deformed reinforcing bars. Magazine of concrete research, Volume 31 (106), pp.3-12. https://doi.org/10.1680/macr.1979.31.106.3
  15. Xinyue, W., Sufen, D., Ashraf, A., Siqi, D., & Baoguo, H. (2021). Bond behaviors between nano-engineered concrete and steel bars. Construction and Building Materials 299.