Structural Engineering and Mechanics

  • 제88권3호
  • /
  • Pages.263-271
  • /
  • 2023
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of a dual isolation system with base and vertical isolation of the upper portion

  • Sasan Babaei (Department of Civil Engineering, Science and Research Branch, Islamic Azad University) ;
  • Panam Zarfam (Department of Civil Engineering, Science and Research Branch, Islamic Azad University) ;
  • Abdolreza Sarvghad Moghadam (Structural Engineering Research Center, International Institute of Earthquake Engineering and Seismology) ;
  • Seyed Mehdi Zahrai (School of Civil Engineering, College of Engineering, University of Tehran)
  • 투고 : 2022.05.04
  • 심사 : 2023.10.17
  • 발행 : 2023.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

Base isolation is a widely used technique for the seismic control of structures as it reduces the structural seismic demand. However, displacement of the isolation layer is not economically feasible in congested urban areas. To resolve the issue, an innovative system is proposed here to isolate both horizontally at the base and vertically in the upper portion of the structure. A simplified linear three degree-of-freedom (3DOF) model of the system that considers the mass and stiffness ratios of the substructure has been introduced and analyzed in MATLAB by spectrum analysis. The 3DOF model results revealed that, when the period of the soft substructure reaches 2.5 times that of the stiff substructure, the isolation and the lower substructure responses decrease by 65% and 51%, respectively. Time-history analysis of a MDOF system at three frequency ratios under a wide range of ground motions indicated that, at the expense of accepting a certain large drift by the soft substructure in the upper portion of the structure, base isolation displacement can be decreased by 10%.

키워드

참고문헌

  1. American Society of Civil Engineers (2000), FEMA 356 Prestandard and Commentary for the Seismic Rehabilitation of Building, Reston, Virginia, USA.
  2. Anajafi, H. and Medina, R.A. (2018), "Comparison of the seismic performance of a partial mass isolation technique with conventional TMD and base-isolation systems under broadband and narrow-band excitations", Eng. Struct., 158, 110-123. https://doi.org/10.1016/j.engstruct.2017.12.018.
  3. Bagheri, M. and Khoshnoudian, F. (2014), "The effect of impact with adjacent structure on seismic behavior of base-isolated buildings with DCFP bearings", Struct. Eng. Mech., 51(2), 277. http://doi.org/10.12989/sem.2014.51.2.277.
  4. Becker, T.C. and Ezazi, A. (2016), "Enhanced performance through a dual isolation seismic protection system", Struct. Des. Tall Spec. Build., 25(1), 72-89. https://doi.org/10.1002/tal.1229.
  5. Cao, L. and Li, C. (2022), "A high performance hybrid passive base-isolated system", Struct. Control Hlth. Monit., 29(3), e2887. https://doi.org/10.1002/stc.2887.
  6. De Angelis, M., Giaralis, A., Petrini, F. and Pietrosanti, D. (2019), "Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems", Eng. Struct., 196, 109250. https://doi.org/10.1016/j.engstruct.2019.05.091.
  7. De Domenico, D., Impollonia, N. and Ricciardi, G. (2018), "Soil-dependent optimum design of a new passive vibration control system combining seismic base isolation with tuned inerter damper", Soil Dyn. Earthq. Eng., 105, 37-53. https://doi.org/10.1016/j.soildyn.2017.11.023.
  8. Farzad Naeim, J.M.K. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons.
  9. Feng, M.Q. and Chai, W. (1997), "Design of a mega-sub-controlled building system under stochastic wind loads", Prob. Eng. Mech., 12(3), 149-162. https://doi.org/10.1016/S0266-8920(96)00035-5.
  10. Kim, H.S. and Kang, J.W. (2019), "Optimal design of smart mid-story isolated control system for a high-rise building", Int. J. Steel Struct., 19(6), 1988-1995. https://doi.org/10.1007/s13296-019-00258-8.
  11. Koo, J.H., Jang, D.D., Usman, M. and Jung, H.J. (2009), "A feasibility study on smart base isolation systems using magneto-rheological elastomers", Struct. Eng. Mech., 32(6), 755. https://doi.org/10.12989/sem.2009.32.6.755.
  12. Li, C., Chang, K., Cao, L., Huang, Y. (2021), "Performance of a nonlinear hybrid base isolation system under the ground motions", Soil Dyn. Earthq. Eng., 143, 106589. https://doi.org/10.1016/j.soildyn.2021.106589.
  13. Liu, Y., Wu, J. and Dona, M. (2018), "Effectiveness of fluid-viscous dampers for improved seismic performance of inter-story isolated buildings", Eng. Struct., 169, 276-292. https://doi.org/10.1016/j.engstruct.2018.05.031.
  14. Ma, X.T., Bao, C., Doh, S.I., Lu, H., Zhang, L.X., Ma, Z.W. and He, Y.T. (2021), "Dynamic response analysis of story-adding structure with isolation technique subjected to near-fault pulse-like ground motions", Phys. Chem. Earth, Parts A/B/C, 121, 102957. https://doi.org/10.1016/j.pce.2020.102957.
  15. Milanchian, R. and Hosseini, M. (2019), "Study of vertical seismic isolation technique with nonlinear viscous dampers for lateral response reduction", J. Build. Eng., 23, 144-154. https://doi.org/10.1016/j.jobe.2019.01.026.
  16. Skandalos, K., Afshari, H., Hare, W. and Tesfamariam, S. (2020), "Multi-objective optimization of inter-story isolated buildings using metaheuristic and derivative-free algorithms", Soil Dyn. Earthq. Eng., 132, 106058. https://doi.org/10.1016/j.soildyn.2020.106058.
  17. Takewaki, I. (2008), "Robustness of base-isolated high-rise buildings under code-specified ground motions", Struct. Des. Tall Spec. Build., 17(2), 257-271. https://doi.org/10.1002/tal.350.
  18. Tsai, C.S., Chen, W.S., Chen, B.J. and Pong W.S. (2006), "Vertical distributions of lateral forces on base isolated structures considering higher mode effects", Struct. Eng. Mech., 23(5), 543. http://doi.org/10.12989/sem.2006.23.5.543.
  19. Yang, Z. and Lam, E.S. (2015), "Seismic mitigation of an existing building by connecting to a base-isolated building with viscoelastic dampers", Struct. Eng. Mech., 53(1), 57-71. https://doi.org/10.12989/sem.2014.53.1.057.
  20. Ziyaeifar, M. (2000). "Method of mass isolation in seismic design of structures", Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
  21. Ziyaeifar, M. and Noguchi, H. (1998), "Partial mass isolation in tall buildings", Earthq. Eng. Struct. Dyn., 27(1), 49-65. https://doi.org/10.1002/(SICI)1096-9845(199801)27:1<49::AID-EQE718>3.0.CO,2-J.