The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

3-step digital complete denture restoration using facialscan: a case report

안면 스캔을 이용한 3회 내원 디지털 총의치 수복: 증례보고

  • Yeongseok Kwon (Department of Prosthodontics, Kyung Hee University College of Dentistry, Kyung Hee University Medical Center) ;
  • Seoung-Jin Hong (Department of Prosthodontics, College of Dentistry, Kyung Hee University) ;
  • Janghyun Paek (Department of Prosthodontics, College of Dentistry, Kyung Hee University) ;
  • Ahran Pae (Department of Prosthodontics, College of Dentistry, Kyung Hee University) ;
  • Hyeong-Seob Kim (Department of Prosthodontics, College of Dentistry, Kyung Hee University) ;
  • Kung-Rock Kwon (Department of Prosthodontics, College of Dentistry, Kyung Hee University) ;
  • Kwantae Noh (Department of Prosthodontics, College of Dentistry, Kyung Hee University)
  • 권영석 (경희대학교 치과병원 보철과) ;
  • 홍성진 (경희대학교 치과대학 치과보철학교실) ;
  • 백장현 (경희대학교 치과대학 치과보철학교실) ;
  • 배아란 (경희대학교 치과대학 치과보철학교실) ;
  • 김형섭 (경희대학교 치과대학 치과보철학교실) ;
  • 권긍록 (경희대학교 치과대학 치과보철학교실) ;
  • 노관태 (경희대학교 치과대학 치과보철학교실)
  • Received : 2023.07.31
  • Accepted : 2023.10.04
  • Published : 2023.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Support, retention, and stability of dentures are key factors in the use of complete dentures in edentulous patients. With the development of digital dentistry, attempts are being made to replace traditional treatment methods. Also, struggle to reduce the number of patient visits and to manufacture high-quality digitally fabricated dentures are ongoing. In this case, a digital denture was restored using a tray capable of obtaining centric relation through gothic arch tracing and a facial scan. By replacing the traditional complete denture restoration method, the number of patient visits was reduced and esthetic results with satisfactory denture support, retention, and stability were obtained.

의치의 지지, 유지, 안정은 무치악 환자의 총의치 수복 시 중요한 요소들이다. 최근 디지털 치의학의 발전으로 전통적인 치료방식을 대체하기 위한 시도들이 계속되고 있으며, 환자의 내원 횟수를 줄이고 높은 수준의 디지털 의치를 제작하려는 시도들이 계속되고 있다. 본 증례에서는 새롭게 고안된 고딕 아치 기록을 통한 중심위 채득이 가능한 tray와 안면 스캔을 이용하여 디지털 총의치로 수복하였다. 전통적인 총의치 수복방식을 대체하여 환자의 내원횟수를 줄이고 만족할만한 의치의 지지, 유지, 안정 및 심미적인 결과를 얻었기에 이를 보고하는 바이다.

Keywords

References

  1. Jacobson TE, Krol AJ. A contemporary review of the factors involved in complete denture retention, stability, and support. Part I: retention. J Prosthet Dent 1983;49:5-15. https://doi.org/10.1016/0022-3913(83)90228-7
  2. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16. https://doi.org/10.1080/19424396.2013.12222317
  3. Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. J Prosthet Dent 2015;114:818-25. https://doi.org/10.1016/j.prosdent.2015.08.001
  4. Bidra AS, Farrell K, Burnham D, Dhingra A, Taylor TD, Kuo CL. Prospective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes. J Prosthet Dent 2016;115:578-86.e1. https://doi.org/10.1016/j.prosdent.2015.10.023
  5. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. J Prosthet Dent 2014;111:351-5. https://doi.org/10.1016/j.prosdent.2013.10.014
  6. Steinmassl PA, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of currently available CAD/CAM denture systems. Int J Prosthodont 2017;30:116-22. https://doi.org/10.11607/ijp.5031
  7. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16. https://doi.org/10.1080/19424396.2013.12222317
  8. Bilgin MS, Baytaroglu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent 2016;10:286-91. https://doi.org/10.4103/1305-7456.178304
  9. Lynch CD, Allen PF. Management of the flabby ridge: using contemporary materials to solve an old problem. Br Dent J 2006;200:258-61. https://doi.org/10.1038/sj.bdj.4813306
  10. Lee JJ, Kim DH, Noh K. A technique for transferring the contours of a functional impression to the polished surfaces of digitally fabricated removable complete dentures. J Prosthet Dent 2020;124:153-6. https://doi.org/10.1016/j.prosdent.2019.05.038
  11. Jung Y, Lee J, Hong SJ, Noh K, Kim HS, Pae A. Fabrication of complete dentures by conventional method and CAD/CAM milling: A case report. J Korean Acad Prosthodont 2019;57:296-303. https://doi.org/10.4047/jkap.2019.57.3.296
  12. Chaffee NR, Cooper LF, Felton DA. A technique for border molding edentulous impressions using vinyl polysiloxane material. J Prosthodont 1999;8:129-34. https://doi.org/10.1111/j.1532-849X.1999.tb00022.x
  13. Hughes GA, Pegli CP. What is centric relation? J Prosthet Dent 1961;11:16-22. https://doi.org/10.1016/0022-3913(61)90104-4
  14. Cho IH, Kwon KR, Kwon HB, Kim MH, Lee CH, Jeong CM, Park CJ, Park SW, Lee JH, Cho HW, Kim HJ, Moon HS, Chung MK, Chung CH, Lim YJ, Lee JS, Song KW, Han CH. Prosthodontic treatment for edentulous patients. 2nd ed. Seoul: Dental Wisdom; 2014. p. 235, 367.
  15. Mai HN, Kim J, Choi YH, Lee DH. Accuracy of portable face-scanning devices for obtaining three-dimensional face models: a systematic review and meta-analysis. Int J Environ Res Public Health 2020;18:94.
  16. Bohner L, Gamba DD, Hanisch M, Marcio BS, Tortamano Neto P, Lagana DC, Sesma N. Accuracy of digital technologies for the scanning of facial, skeletal, and intraoral tissues: A systematic review. J Prosthet Dent 2019;121:246-51. https://doi.org/10.1016/j.prosdent.2018.01.015
  17. Michelinakis G, Apostolakis D, Velidakis E. An in vitro comparison of accuracy between three different face scanning modalities. Eur J Prosthodont Restor Dent 2023;31:296-307.
  18. Charoenphol K, Peampring C. Fit accuracy of complete denture base fabricated by CAD/CAM milling and 3D-printing methods. Eur J Dent 2022 Dec 13.
  19. Alhallak K, Hagi-Pavli E, Nankali A. A review on clinical use of CAD/CAM and 3D printed dentures. Br Dent J 2023 Jan 9. doi: 10.1038/s41415-022-5401-5. Epub ahead of print.