과제정보
The authors would like to express their special thanks for the financial support from Jiangsu Funding Program for Excellent Postdoctoral Talent and the National Natural Science Foundation of China (No. 12205045). The support is gratefully acknowledged.
참고문헌
- N. Cao, X. Lang, D. Lu, et al., Experimental research on mixing coefficient of fuel assembly in single-phase, Nucl. Power Eng. 30 (5) (2009) 22-25, 47.
- D.S. Rowe, C.W. Angle, Crossflow Mixing between Parallel Flow Channels during Boiling. Part Ii. Measurement of Flow and Enthalpy in Two Parallel channels[R], Pacific Northwest Lab., Battelle-Northwest, Richland, Wash, 1967.
- D.S. Rowe, C.W. Angle, Crossflow Mixing between Parallel Flow Channels during Boiling. Part Iii. Effect of Spacers on Mixing between Two channels[R], Pacific Northwest Lab, Battelle-Northwest, Richland, Wash, 1969.
- F. Castellana, J. Casterline, Subchannel flow and enthalpy distributions at the exit of a typical nuclear fuel core geometry, Nucl. Eng. Des. 22 (1) (1972) 19-27. https://doi.org/10.1016/0029-5493(72)90058-1
- F. Castellana, W. Adams, J. Casterline, Single-phase subchannel mixing in a simulated nuclear fuel assembly, Nucl. Eng. Des. 26 (2) (1974) 242-249. https://doi.org/10.1016/0029-5493(74)90059-4
- F.F. Cadek, D.P. Dominicis, F.E. Motley, Effect of Axial Spacing on Interchannel Thermal Mixing with the R Mixing Vane Grid, Westinghouse Electric Corp, 1975.
- F.E. Motley, A.H. Wenzell, F.F. Cadek, Effect of 17×17 Fuel Assembly Geometry on Interchannel Thermal Mixing, Westinghouse Electric Corp, 1975.
- J.W. Winters, R.P. Vijuk, W.E. Cummins, AP1000 Design Control Document 18 (2008).
- C. Cheng, Q. Su, D. Lu, et al., Experimental research of geometrical parameters influencing factor on fuel assembly mixing characteristics, Ann. Nucl. Energy 164 (2021), 108634.
- A. Liu, B.W. Yang, B. Han, et al., Turbulent mixing models and other mixing coefficients in subchannel codes-a review Part A: single phase, Nucl. Technol. 206 (9) (2020) 1253-1295. https://doi.org/10.1080/00295450.2020.1792753
- Maria Avramova, Development of an Innovative Spacer Grid Model Utilizing Computational Fluid Dynamics within a Subchannel Analysis tool[D], The Pennsylvania State University, University Park, PA, USA, 2007. PhD thesis.
- Bostjan Konꠑcar, et al., Simulation of turbulent flow in MATIS-H rod bundle with split-type mixing vanes, Nucl. Eng. Des. 327 (2017) 112-126. https://doi.org/10.1016/j.nucengdes.2017.12.017
- M.E. Conner, E. Baglietto, A.M. Elmahdi, CFD methodology and validation for single-phase flow in PWR fuel assemblies, Nucl. Eng. Des. 240 (9) (2010) 2088-2095. https://doi.org/10.1016/j.nucengdes.2009.11.031
- B.W. Yang, H. Zhang, B. Han, et al., CFD analysis on mixing effects of spacer grids with different dimples and sizes for advanced fuel assemblies, Kerntechnik 81 (3) (2016) 221-232. https://doi.org/10.3139/124.110741
- D. Chen, Y. Xiao, S. Xie, et al., Thermalehydraulic performance of a 5× 5 rod bundle with spacer grid in a nuclear reactor, Appl. Therm. Eng. 103 (2016) 1416-1426. https://doi.org/10.1016/j.applthermaleng.2016.05.028
- V.Y. Agbodemegbe, X. Cheng, E.H.K. Akaho, et al., Correlation for cross-flow resistance coefficient using STAR-CCM+ simulation data for flow of water through rod bundle supported by spacer grid with split-type mixing vane, Nucl. Eng. Des. 285 (2015) 134-149. https://doi.org/10.1016/j.nucengdes.2015.01.003
- Bostjan Konꠑcar, et al., Simulation of turbulent flow in MATIS-H rod bundle with split-type mixing vanes, Nucl. Eng. Des. 327 (2017) 112-126. https://doi.org/10.1016/j.nucengdes.2017.12.017
- W. Chen, H. Zhong, F. Zhang, et al., Mixing performance analysis for advanced fuel assembly grid, Nucl. Power Eng. 29 (3) (2008) 1-4, 27.
- Hui Zhang, Bao-Wen Yang, Bin Zhang, Bin Han, Yanping Huang, Numerical Study on the Effects of Vane Angle and Dimple on the Thermal Hydraulic Performance of a PWR Fuel Assembly, the 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16), 2015 (Chicago, USA).
- B. Han, B.W. Yang, H. Zhang, et al., The effect of spacer grid critical component on pressure drop under both single and two phase flow conditions, Kerntechnik 81 (3) (2016) 257-267. https://doi.org/10.3139/124.110745
- B.W. Yang, H. Anglart, B. Han, et al., Progress in rod bundle CHF in the past 40 years, Nucl. Eng. Des. 376 (2021), 111076.
- B.W. Yang, B. Han, A. Liu, et al., Recent challenges in subchannel thermal-hydraulics-CFD modeling, subchannel analysis, 110236.