Earthquakes and Structures

  • 제25권4호
  • /
  • Pages.283-296
  • /
  • 2023
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of reinforcing details on seismic behavior of RC exterior wide beam-column joint

  • Jae Hyun Kim (Department of Architectural Engineering, University of Seoul) ;
  • Seung-Ho Choi (Department of Fire and Disaster Prevention Engineering, University of Seoul) ;
  • Sun-Jin Han (Department of Architectural Engineering, University of Seoul) ;
  • Hoseong Jeong (Department of Architectural Engineering and the Smart City Interdisciplinary Major Program, University of Seoul) ;
  • Jae-Yeon Lee (Department of Architecture, Mokwon University) ;
  • Kang Su Kim (Department of Architectural Engineering and the Smart City Interdisciplinary Major Program, University of Seoul)
  • 투고 : 2023.08.07
  • 심사 : 2023.09.25
  • 발행 : 2023.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents experimental and numerical studies of seismic performance on reinforced concrete (RC) wide beam (WB) joints. Two RC-WB joint specimens and one conventional RC joint specimen were fabricated using the reinforcing details of longitudinal reinforcing bars in a beam as a variable, and quasi-static cyclic loading tests were performed. The results were used to compare and analyze the load-drift ratio relationship, failure mode, and seismic performance of the specimens quantitatively. In addition, a finite element (FE) analysis of the RC-WB joint was conducted, and the rationality of the FE model was validated by comparing it with the test results. Based on the FE model, a parametric study was conducted, where the ratio of longitudinal reinforcing bars placed on the outer and inner parts of the joint (𝜌ex/𝜌in) was a key variable. The results showed that, in the RC-WB joint, an increase of 𝜌ex/𝜌in leads to more severe damage to concrete, which reduces the seismic performance of the RC-WB joints.

키워드

과제정보

This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2021R1I1A3049928).

참고문헌

  1. ACI Committee 374 (2005), Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary (ACI 374.1-05), American Concrete Institute, Farmington Hills, MI, USA. 
  2. ACI Committee 318 (2019), Building Code Requirements for Structural Concrete and Commentary (ACI 318-19), American Concrete Institute, Farmington Hills, MI, USA.
  3. Al-Osta, A.M., Khan, M.I., Bahraq, A.A. and Xu, S.Y. (2020), "Application of ultra-high performance fiber reinforced concrete for retrofitting the damaged exterior reinforced concrete beam-column joints", Earthq.Struct., 19(5), 361-377. https://doi.org/10.12989/eas.2020.19.5.361. 
  4. Behnam, H. and Kuang, J.S. (2018), "Exterior RC wide beam-column connections: Effect of spandrel beam on seismic behavior", J. Struct. Eng., 144(4), 1-13. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001995. 
  5. Behnam, H., Kuang, J.S. and Samali, B. (2018), "Parametric finite element analysis of RC wide beam-column connections", Comput. Struct., 205(1), 28-44. https://doi.org/10.1016/j.compstruc.2018.04.004 
  6. Benavent-Climent, A. (2007), "Seismic behavior of RC wide beam-column connections under dynamic loading", J. Earthq. Eng., 11(4), 493-511. https://doi.org/10.1080/13632460601064814. 
  7. Benavent-Climent, A., Cahis, X. and Zahran, R. (2009), "Exterior wide beam-column connections in existing RC frames subjected to lateral earthquake loads", Eng. Struct., 31(7), 1414-1424. https://doi.org/10.1016/j.engstruct.2009.02.008. 
  8. Choi, S.H., Hwang, J.H., Lee, D.H., Kim, K.S., Zhang, D. and Kim, J.R. (2018), "Experimental study on RC frame structures strengthened by externally-anchored PC wall panels", Comput. Concrete, 22(4), 383-393. https://doi.org/10.12989/cac.2018.22.4.383. 
  9. Choi, S.H., Kim, J.H., Jeong, H. and Kim, K.S. (2022), "Seismic behavior of beam-column joints with different concrete compressive strengths", J. Build. Eng., 52, 1-14. https://doi.org/10.1016/j.jobe.2022.104484. 
  10. Cohn, M.Z. and Bartlett, M. (1982), "Computer-simulated flexural tests of partially pre-stressed concrete sections", ASCE J. Struct. Div., 108(ST12), 2747-2765. https://doi.org/10.1061/jsdeag.0006103. 
  11. Choudhury, T. and Bansal, P.P. (2022), "Seismic retrofitting and fragility for damaged RC beam-column joints using UHP-HFRC", Earthq. Struct., 23(5), 463-472. https://doi.org/10.12989/eas.2022.23.5.463. 
  12. Collins, M.P. (1991), Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, NJ, USA.
  13. Comite Euro-International du Beton. (1993), CEB-FIP Model Code 1990: Design Code, Thomas Telford Publishing, London, UK. 
  14. Dabiri, H., Kheyoroddin, A. and Kaviani, A. (2019), "A numerical study on the seismic response of RC wide column-beam joints", Int. J. Civil Eng., 17(7), 1-20. https://doi.org/10.1007/s40999-018-0364-2. 
  15. Elsouri, A.M. and Harajli, M.H. (2013), "Seismic response of exterior RC wide beam-narrow column joints: Earthquake-resistant versus as-built joints", Eng. Struct., 57, 394-405. https://doi.org/10.1016/j.engstruct.2013.09.032. 
  16. Fadwa, I., Ali, T.A., Nazih, E. and Sara, M. (2014), "Reinforced concrete wide and conventional beam-column connections subjected to lateral load", Eng. Struct., 76, 34-48. https://doi.org/ 10.1016/j.engstruct.2014.06.029. 
  17. Gentry, T.R. and Wight, J.K. (1994), "Wide beam-column connections under earthquake-type loading", Earthq. Spectra, 10(4), 675-703. https://doi.org/10.1193/1.1585793. 
  18. Huang, R.Y.C., Kuang, J.S. and Mogili, S. (2019), "Effect of joint hoops on seismic behavior of wide beam-column joints", ACI Struct. J., 116(6), 131-142. https://doi.org/10.14359/51718006. 
  19. Huang, R.Y.C. and Kuang, J.S. (2020), "Predicting strength of exterior wide beam-column joints for seismic resistance", J. Struct. Eng., 146(6), 1-11. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002488. 
  20. Hwang, J.H., Jeong, H., Han, S.J. and Kim, K.S. (2021), "Experimental study on lateral behavior of post-tensioned precast beam-column joints", Struct., 33(1), 841-854. https://doi.org/ 10.1016/j.istruc.2021.04.095. 
  21. Hwang, S.J., Lee, H.J., Liao, T.F., Wang, K.C. and Tsai, H.H. (2005), "Role of hoops on shear strength of reinforced concrete beam-column joints", ACI Struct. J., 102(3), 445-453. https://doi.org/10.14359/14416. 
  22. Kim, J.H., Choi, S.H., Hwang, J.H., Jeong, H., Han, S.J. and Kim, K.S. (2021), "Experimental study on lateral behavior of post-tensioned precast beam-column joints", Struct., 33(1), 841-854. https://doi.org/ 10.1016/j.istruc.2021.04.095. 
  23. Kim, J.H., Jang, B.S., Choi, S.H., Lee, Y.J., Jeong, H. and Kim, K.S. (2021), "Experimental study on lateral behavior of precast wide beam-column joints", Earthq. Struct., 21(6), 653-667. https://doi.org/10.12989/eas.2021.21.6.653. 
  24. Kim, J.H., Lee, D., Choi, S.H, Jeong, H. and Kim, K.S. (2022), "Seismic performance of precast multi-span frame system integrated by unbonded tendons", ACI Struct. J/, 119(5), 193-206. https://doi.org/10.14359/51734801/ 
  25. Kmiecik, P. and Kaminski, M. (2011), "Modeling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration", Arch. Civil Mech. Eng., 11(3), 623-636. https://doi.org/10.1016/S1644-9665(12)60105-8. 
  26. Kuang, J.S., Behnam, H. and Huang, Q. (2017), "Effective beam width of reinforced-concrete wide beam-column connections", Struct. Build., 170(5), 336-353. https://doi.org/10.1680/jstbu.15.00124. 
  27. Kulkarni, S.A. and Li, B. (2009), "Seismic behavior of reinforced concrete interior wide-beam column joints", J. Earthq. Eng., 13, 80-99. https://doi.org/10.1080/13632460802211941. 
  28. Li, B. and Kulkarni, A. (2010), "Seismic behavior of reinforced concrete exterior wide beam-column joints", J. Struct. Eng., 136(1), 26-36. https://doi.org/10.1061/(ASCE)0733-9455(2010)136:1(26). 
  29. Luk, S.H. and Kuang, J.S. (2012), "Seismic behaviour of RC exterior wide beam-column joints", 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September. 
  30. Masi, A., Santarsiero, G., Mossucca, A. and Nigro, D. (2014), "Influence of axial load on the seismic behavior of RC beam-column joints with wide beam", Appl. Mech. Mater., 508, 208-214. https://doi.org/10.4028/www.scientific.net/AMM.508.208. 
  31. Marthong, C. (2019), "Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh", Earthq. Struct., 16(3), 253-263. https://doi.org/10.12989/eas.2019.16.3.253. 
  32. Marthong, C. and Vanlalruata, J. (2021), "Behaviour of repaired rc beam-column joints using welded wire mesh and jacketed with polymer modified mortar", Earthq. Struct., 21(1), 79-93. https://doi.org/10.12989/eas.2021.21.1.079. 
  33. Mirzabagheri, S., Tasnimi, A.A. and Mohammadi, M.S. (2016), "Behavior of interior RC wide and conventional beam-column roof joints under cyclic load", Eng. Struct., 111(15), 333-344. https://doi.org/10.1016/j.engstruct.2015.12.011. 
  34. Moon, J.H., Choi, Y.C., Lim, J.H., Lee, L.H., Kwon, K.H. and Kim, K.S. (2007), "Post-tensioned interior precast wide beam-column connections subjected to lateral loading", Adv. Struct. Eng., 10(5), 487-500. https://doi.org/10.1260/136943307782417654. 
  35. Niroomandi, A., Najafgholipour, M.A. and Ronagh, H.R. (2014), "Numerical investigation of the affecting parameters on the shear failure of nonductile RC exterior joints", Eng. Fail. Anal., 46, 62-75. https://doi.org/10.1016/j.engfailanal.2014.08.003. 
  36. Ozden, S., Akguzel, U. and Ozturan, T. (2011), "Seismic strengthening of infilled reinforced concrete frames with composite materials", ACI Struc. J., 108(4), 414-422. https://doi.org/10.14359/51682981. 
  37. Paulay, T. and Priestley, M.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley-Interscience, Hoboken, NJ, USA. 
  38. Quintero-Febres, C.G. and Wight, J.K. (2001), "Experimental study of reinforced concrete interior wide beam-column connections subjected to lateral loading", ACI Struct. J., 98(4), 572-582. https://doi.org/10.14359/10300. 
  39. Sharbatdar, M.K., Kheyroddin, A. and Emami, E. (2012), "Cyclic performance of retrofitted reinforced concrete beam-column joints using steel prop", Constr. Build. Mater., 36, 287-294. https://doi.org/10.1016/j.conbuildmat.2012.04.115. 
  40. Siah, W.L., Stehle, J.S., Mendis, P. and Goldsworthy, H. (2003), "Interior wide beam connections subjected to lateral earthquake loading", Eng. Struct., 25(3), 281-291. https://doi.org/10.1016/S0141-0296(02)00150-5. 
  41. Shigeru, H., Robert, P. and Hitoshi, T. (2000), "Seismic load tests on interior and exterior beam-column joints with substandard reinforcing details", ACI Struct. J., 97(1), 11-25. https://doi.org/10.14359/829. 
  42. Smith, M. (2009), ABAQUS/Standard User's Manual, Version 6.9, Dassault Systems Simulia Corp., Providence, RI, USA. 
  43. Zhang, W., Lee, D., Kim, S.H., Ju, H. and Lee, C.J. (2023), "Seismic performance of precast wide beam-column connections with asymmetrical anchorage reinforcement details", Eng. Struct., 275, 1-17. https://doi.org/10.1016/j.engstruct.2022.115237.