Acknowledgement
This work was supported by the National Natural Science Foundation of China (Grant No. 52175150), and the Key R&D Program of Shandong Province (Grant No. 2021CXGC010303).
References
- Z. Wang, M. Liu, H. Guo, A strategic path for the goal of clean and low-carbon energy in China, Nat. Gas. Ind. B 3 (4) (2016) 305-311. https://doi.org/10.1016/j.ngib.2016.12.006
- M.D. Mathew, Nuclear energy: a pathway towards mitigation of global warming, Prog. Nucl. Energy 143 (2022), 104080.
- J. Kim, Y. Oh, S. Choi, C. Jang, Investigation on the thermal butt fusion performance of the buried high density polyethylene piping in nuclear power plant, Nucl. Eng. Technol. 51 (4) (2019) 1142e1153.
- J.S. Egerton, M. Lowe, H.V. Halai, P. Huthwaite, Improved FE simulation of ultrasound in plastics, in: Review of Progress in Quantitative Nondestructive Evaluation, Minneapolis, MN, 2016. July 26-31.
- T.M. Adams, D. Munson, Basis of the fatigue capacities, stress intensification factors, and flexibility factors for high density polyethylene pipe in the ASME boiler and pressure vessel code, Section III, Division 1, in: International Conference on Nuclear Engineering and the ASME Power Conference, Anaheim, CA, 2012. July 30-Aug 03.
- S.L. Abel, M.D. Brandes, L.J. Corley, J.L. Fortman, T.M. Musto, J. O'Sullivan, Use of HDPE piping in the Callaway nuclear plant essential service water system, in: Pressure Vessels and Piping Conference, Prague, Czech Republic, 2009. July 26-30.
- A. Hu, F. Yu, R. Yang, J. Shi, Y. Cui, J. Zheng, Introduction of design methods and standards of polyethylene pipes for nuclear power plants, China Plastics 34 (2020) 67-77.
- B.G. Jeon, S.W. Kim, H.S. Choi, D.U. Park, N.S. Kim, A failure estimation method of steel pipe elbows under in-plane cyclic loading, Nucl. Eng. Technol. 49 (1) (2017) 245-253. https://doi.org/10.1016/j.net.2016.07.006
- D. Butler, Reactors, residents and risk, Nature 472 (2011) 400-401.
- D. Liu, J. Zheng, Z. Chen, L. Liu, Analysis of the safety of nuclear power plants, Adv. Mater. Res. 724-725 (2013) 692-695. https://doi.org/10.4028/www.scientific.net/AMR.724-725.692
- S. Kwag, J. Kwak, H. Lee, J. Oh, G.H. Koo, Enhancement in the seismic performance of a nuclear piping system using multiple tuned mass dampers, Energies 12 (11) (2019) 2077.
- G. Koo, J. Jung, J. Hwang, T. Shin, M. Lee, Vertical seismic isolation device for three-dimensional seismic isolation of nuclear power plant equipment-case study, Appl. Sci. 12 (1) (2022) 320.
- S. Kwag, S. Eem, J. Kwak, H. Lee, J. Oh, G.H. Koo, Mitigation of seismic responses of actual nuclear piping by a newly developed tuned mass damper device, Nucl. Eng. Technol. 53 (8) (2021) 2728-2745. https://doi.org/10.1016/j.net.2021.02.009
- Y. Heo, S. Oh, Design modification and shaking table test of the drain pipes of steam generator for vibration reduction, Nucl. Eng. Des. 340 (2018) 68-72. https://doi.org/10.1016/j.nucengdes.2018.09.025
- J. Nie, G. DeGrassi, C. Hofmayer, S. Ali, Nonlinear seismic correlation analysis of the JNES/NUPEC large-scale piping system tests, in: Pressure Vessels and Piping Conference, Chicago, IL, USA, 2008. July 27-31.
- H. Guo, R.G. Rinaldi, S. Tayakout, M. Broudin, O. Lame, The correlation between the mixed-mode oligo-cyclic loading induced mechanical and microstructure changes in HDPE, Polymer 224 (2021), 123706.
- J. Shi, A. Hu, F. Yu, Y. Cui, R. Yang, J. Zheng, Finite element analysis of high-density polyethylene pipe in pipe gallery of nuclear power plants, Nucl. Eng. Technol. 53 (3) (2021) 1004-1012. https://doi.org/10.1016/j.net.2020.08.019
- J. Zheng, Y. Zhang, D. Hou, Y. Qin, W. Guo, C. Zhang, J. Shi, A review of nondestructive examination technology for polyethylene pipe in nuclear power plant, Front. Mech. Eng. 13 (2018) 535-545. https://doi.org/10.1007/s11465-018-0515-9
- S. Kalyanam, P. Krishnaswamy, Y. Hioe, D.J. Shim, E. Focht, A fracture mechanics approach to service life prediction of HDPE fusion joints in nuclear applications, Plast. Eng. 71 (6) (2015) 40-45. https://doi.org/10.1002/j.1941-9635.2015.tb01376.x
- S. Chen, H.S. Lai, R. Lin, X.H. Duan, Study on the creep properties of butt Fusion-welded joints of HDPE pipes using the nanoindentation test, Weld. World 66 (2022) 135-144. https://doi.org/10.1007/s40194-021-01186-0
- J. Zheng, D. Hou, W. Guo, X. Miao, Y. Zhou, J. Shi, Ultrasonic inspection of electrofusion joints of large polyethylene pipes in nuclear power plants, J. Pressure Vessel Technol. 138 (2016), 060902.
- Plastic Pipe Database Committee, American Gas Association, Plastic Piping Data Collection Initiative Status Report, 2022-05. https://www.aga.org/contentassets/c139635bd829446eb292e2801b321e88/ppdc-march-2022-final06282022.pdf.
- Phase Array Ultrasonic Testing of Butt-Fusion Joints in Polyethylene Pipe, T/ZJASE 008-2021, 2021.
- Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints, ASTM E3044/E3044M-16, 2016.
- Thermoplastic pipes for the conveyance of fluids - inspection of polyethylene butt fusion joints using phased array ultrasonic testing, ISO/TS 22499 (2019) 2019.
- J. Shi, D. Hou, W. Guo, Y. Zhou, X. Chen, J. Zheng, Ultrasonic inspection of large diameter polyethylene pipe used in nuclear power plant, in: Pressure Vessels and Piping Conference, Anaheim, California, USA, 2014. July 20-24.
- S.L. Crawford, S.R. Doctor, A.D. Cinson, M.W. Watts, T.L. Moran, M.T. Anderson, Assessment of NDE methods to detect lack of fusion in HDPE butt fusion joints, in: Pressure Vessels and Piping Conference, Baltimore, Maryland, USA, 2011. July 17-21.
- F. Caleb, P. Allen, Z. David, High-density polyethylene piping butt-fusion joint examination using ultrasonic phased array, J. Pressure Vessel Technol. 135 (2) (2010), 051501.
- S.L. Abel, M.D. Brandes, L.J. Corley, J.L. Fortman, T.M. Musto, J. O'Sullivan, Use of HDPE piping in the Callaway nuclear plant essential service water system, in: Pressure Vessels and Piping Conference, Prague, Czech Republic, 2009. July 26-30.
- H.S. Lai, N.N. Tun, K.B. Yoon, S.H. Kil, Effects of defects on failure of butt fusion welded polyethylene pipe, Int. J. Pres. Ves. Pip. 139e140 (2016) 117-122. https://doi.org/10.1016/j.ijpvp.2016.03.010
- J. Shi, J. Zheng, W. Guo, Formation mechanism of the eigen-line in electrofusion joints of polyethylene pipes, J. Pressure Vessel Technol. 133 (5) (2011), 051403.
- J.W. Wee, M.S. Choi, A. Chudnovsky, B.H. Choi, Stochastic study on discontinuous slow crack growth kinetics from an arbitrarily located defect of polyethylene based on the crack layer theory, Int. J. Mech. Sci. 197 (2021), 106326.
- P. Hutar, M. Zouhar, L. Nahlik, M. Sevcik, B. Masa, Multilayer polymer pipes failure assessment based on a fracture mechanics approach, Eng. Fail. Anal. 33 (2013) 151-162. https://doi.org/10.1016/j.engfailanal.2013.04.022
- A.J. Kinloch, R.J. Young, Fracture behaviour of polymer, Compos. Struct. (1983).
- J.S. Kim, Y.J. Lee, Y.J. Oh, Study on tensile fatigue behavior of thermal butt fusion in safety Class III high-density polyethylene buried piping in nuclear power plants, Trans. Korean Soc. Mech. Eng. A 39 (1) (2015) 11-17. https://doi.org/10.3795/KSME-A.2015.39.1.011
- P. Krishnaswamy, D. Shim, S. Kalyanam, Comparison of parent and butt-fusion material properties of unimodal high-density polyethylene, J. Pressure Vessel Technol. 139 (4) (2017), 041413.
- G. Nie, C. Zhang, Z. Wang, W. Xu, Y. Shi, Experimental study of collapse behavior of single-layer cylinder shells with infilled walls, Structures 36 (2022) 793-804. https://doi.org/10.1016/j.istruc.2021.12.051
- D. Zhu, Z. Zhu, C. Zhang, X. Xie, Shaking Table Test on the tunnel dynamic response under different fault dip angles, Symmetry-Basel 13 (8) (2021) 1375.
- C. Shen, D. Qian, Dynamic characteristics and seismic response of frame-core tube structures, considering soil-structure interactions, Struct. Des. Tall Special Build. 28 (3) (2019) e1575.
- K. Kim, T. Choi, M.G. Na, H. Jung, Residual stress measurement on the butt-welded area by electronic speckle pattern interferometry, Nucl. Eng. Technol. 47 (1) (2015) 115-125. https://doi.org/10.1016/j.net.2014.09.001