Computers and Concrete

  • 제32권3호
  • /
  • Pages.339-349
  • /
  • 2023
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance of self-sustaining precast wide beam-column connections for fast construction

  • Wei Zhang (Department of Architectural Engineering, Chungbuk National University) ;
  • Seonhoon Kim (Department of Architectural Engineering, Chungbuk National University) ;
  • Deuckhang Lee (Department of Architectural Engineering, Chungbuk National University) ;
  • Dichuan Zhang (Department of Civil and Environmental Engineering, Nazarbayev University) ;
  • Jong Kim (Department of Civil and Environmental Engineering, Nazarbayev University)
  • 투고 : 2023.06.02
  • 심사 : 2023.07.13
  • 발행 : 2023.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fast-built construction is a key feature for successful applications of precast concrete (PC) moment frame system in recent construction practices. To this end, by introducing some unique splicing details in precast connections, especially between PC columns including panel zones, use of temporary supports and bracings can be minimized based on their self-sustaining nature. In addition, precast wide beams are commonly adopted for better economic feasibility. In this study, three self-sustaining precast concrete (PC) wide beam-column connection specimens were fabricated and tested under reversed cyclic loadings, and their seismic performances were quantitatively evaluated in terms of strength, ductility, failure modes, energy dissipation and stiffness degradation. Test results were compared with ASCE 41-17 nonlinear modeling curves and its corresponding acceptance criteria. On this basis, an improved macro modeling method was explored for a more accurate simulation. It appeared that all the test specimens fully satisfy the acceptance criteria, but the implicit joint model recommended in ASCE 41-17 tends to underestimate the joint shear stiffness of PC wide beam-column connection. While, the explicit joint model along with concentrated plastic hinge modeling technique is able to present better accuracy in simulating the cyclic responses of PC wide beam-column connections.

키워드

과제정보

This work was supported by a funding for the academic research program of Chungbuk National University in 2023. Also, this work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS-2023-00209647). Note that this study was conducted during visiting research period of the corresponding author in School of Engineering and Digital Sciences at Nazarbayev University.

참고문헌

  1. Abbas, A.A., Mohsin, S.M.S. and Cotsovos, D.M. (2014), "Seismic response of steel fibre reinforced concrete beam-column joints", Eng. Struct., 59(59), 261-283. https://doi.org/10.1016/j.engstruct.2013.10.046.
  2. ACI 318 (2019), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
  3. ACI 352R (2002), Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, American Concrete Institute, Farmington Hills, MI, USA. 
  4. ACI 374 2R (2013), Guide for Testing Reinforced Concrete Structural Elements Under Slowly Applied Simulated Seismic Loads, American Concrete Institute, Farmington Hills, MI, USA.
  5. ACI 374.1 (2005), Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
  6. Aldowaish, A., Kokuryo, J., Almazyad, O. and Goi, H.C. (2022), "Environmental, social, and governance integration into the business model: Literature review and research agenda", Sustainab., 14(5), 2959. https://doi.org/10.3390/su14052959.
  7. Ali, P. and Mohammad, K. (2020), "Experimental cyclic behavior of code-conforming exterior wide beam-column connections", Eng. Struct., 214(2020), 110613. https://doi.org/10.1016/j.engstruct.2020.110613.
  8. ASCE 41 (2017), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers, Reston, VA, USA.
  9. Baek, J.W., Kang, S.M., Ki, T.H. and Kim, J.Y. (2020), "Structural performance of PC double beam-column connection under gravity and seismic loading", Int. J. Concrete Struct. Mater., 14(60), 2020. https://doi.org/10.1186/s40069-020-00439-4.
  10. Behnam, H., Kuang, J.S. and Samali, B. (2018), "Parametric finite element analysis of RC wide beam-column connections", Comput. Struct., 205(2018), 28-44. https://doi.org/10.1016/j.compstruc.2018.04.004.
  11. Esmaeili, J. and Ahooghalandary, N. (2019), "Introducing a precast moment resistant beam-to-column concrete connection comparable with in-situ one", Comput. Concrete, 23(3), 203-215. https://doi.org/10.12989/cac.2019.23.3.203.
  12. Fan, J.J., Wu, G., Feng, D.C., Zeng, Y.H. and Lu, Y. (2020), "Seismic performance of a novel self-sustaining beam-column connection for precast concrete moment-resisting frames", Eng. Struct., 222(2020), 111096. https://doi.org/10.1016/j.engstruct.2020.111096.
  13. Huang, R.Y.C., Kuang, J.S. and Mogili, S. (2019), "Effect of joint hoops on seismic behavior of wide beam-column joints", ACI Struct. J., 116(6), 131-142. https://doi.org/10.14359/51718006.
  14. Hwang, J.H., Choi, S.H., Lee, D.H., Kim, K.S. and Kwon, O.S. (2021), "Seismic behaviour of post-tensioned precastconcrete beam-column connections", Mag. Concrete Res., 73(9), 433-447. https://doi.org/10.1680/jmacr.19.00083.
  15. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511. https://doi.org/10.1002/eqe.495.
  16. Jang, B.S., Kim, J.H., Choi, S.H., Kim, K.S., Hwang, J.H. and Choi, S.D. (2020), "Structural behavior of precast wide girder-column joints under lateral cyclic loading", J. Korea Concrete Inst., 33(3), 289-297. https://doi.org/10.4334/JKCI.2021.33.3.289.
  17. Kataoka, M.N., Ferreira, M.A. and El Debs, A.L.H.C. (2015), "Study on the behavior of beam-column connection in precast concrete structure", Comput. Concrete, 16(1), 163-178. https://doi.org/10.12989/cac.2015.16.1.163.
  18. Kim, J.H., Jang, B.S., Choi, S.H., Lee, Y.J. and Kim, K.S. (2021), "Experimental study on lateral behavior of precast wide beam-column joints", Earthq. Struct., 21(6), 653-667. https://doi.org/10.12989/eas.2021.21.6.653.
  19. Kim, S.H., Kang, T.H.K., Jung, D.H. and James, M.L. (2021), "Seismic behavior of precast and post-tensioned exterior connections with ductile headed rods", ACI Struct. J., 118(1), 87-100. https://doi.org/10.14359/51728179.
  20. Lee, D.H., Kang, T.H.K., Ju, H., Moon, S.W. and Yang, I.S. (2019), "Seismic performance of RC column-foundation connections with combo-type mechanical splices", ACI Struct. J., 116(5), 173-186. https://doi.org/10.14359/51716766.
  21. McKenna, F., Fenves, G.L. and Scott, M.H. (2000), Open System for Earthquake Engineering Simulation; University of California, Berkeley, CA, USA. http://opensees.berkeley.edu.
  22. McKenna, F., Scott, M.H. and Fenves, G.L. (2010) "Nonlinear finite-element analysis software architecture using object composition", J. Comput. Civil Eng., 24(1), 95-107. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000002
  23. Ogwu, I., Long, Z., Lee, D., Zhang, X., Zhang, W. and Okonkwo, M. (2021), "Fundamental issues in the qualification of smart and intelligence in building materials discourse: A systematic review", Build., 11(11), 558. https://doi.org/10.3390/buildings11110558.
  24. Wong, H.F. and Kuang, J.S. (2005), Experimental Study on Shear Strength of Exterior Beam-Column Joints with Different Types of Beam Bar Anchorages, World Scientific Publishing, Hong Kong.
  25. Wu, Z., Luo, L., Li, H., Wang, Y., Bi, G. and Antwi-Afari, M.F. (2021), "An analysis on promoting prefabrication implementation in construction industry towards sustainability", Int. J. Environ. Res. Public Health, 18(21), 11493. https://doi.org/10.3390/ijerph182111493.
  26. Yuksel, E., Karadogan, H.F., Bal, I.E., Ilki, A., Bal, A. and Inci, P. (2015), "Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction", Eng. Struct., 18(21), 11493. https://doi.org/10.1016/j.engstruct.2015.04.044.
  27. Zhang, D., Fleischman, R.B. and Lee, D. (2020), "Effects of diaphragm flexibility on the seismic design acceleration of precast diaphragms", Comput. Concrete, 25(3), 273-282. https://doi.org/10.12989/cac.2020.25.3.273.
  28. Zhang, W., Lee, D., Kim, S.H., Ju, H. and Lee, C.J. (2023), "Seismic performance of precast wide beam-column connections with asymmetrical anchorage reinforcement details", Eng. Struct., 275(2023), 115237. https://doi.org/10.1016/j.engstruct.2022.115237.
  29. Zhang, W., Lee, D.H., Lee, W.J., Kim, M.S. and Park, J.Y. (2023), "Effect of cast-in-place beams on seismic performance of precast shear walls", ACI Struct. J., 120(1), 89-102. https://doi.org/10.14359/51737231.