Steel and Composite Structures

  • 제48권4호
  • /
  • Pages.385-403
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Damage and deformation of new precast concrete shear wall with plastic damage relocation

  • Dayang Wang (School of Civil Engineering, Guangzhou University) ;
  • Qihao Han (School of Civil Engineering, Guangzhou University) ;
  • Shenchun Xu (School of Civil Engineering, Guangzhou University) ;
  • Zhigang Zheng (State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment, China Nuclear Power Engineering Co. Ltd.) ;
  • Quantian Luo (School of Mechanical and Mechatronic Engineering, University of Technology Sydney) ;
  • Jihua Mao (Guangzhou Guangjian Construction Engineering Testing Center Co., Ltd.)
  • 투고 : 2022.06.14
  • 심사 : 2023.04.20
  • 발행 : 2023.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

To avoid premature damage to the connection joints of a conventional precast concrete shear wall, a new precast concrete shear wall system (NPSW) based on a plastic damage relocation design concept was proposed. Five specimens, including one monolithic cast-in-place concrete shear wall (MSW) as a reference and four NPSWs with different connection details (TNPSW, INPSW, HNPSW, and TNPSW-N), were designed and tested by lateral low-cyclic loading. To accurately assess the damage relocation effect and quantify the damage and deformation, digital image correlation (DIC) and conventional data acquisition methods were used in the experimental program. The concrete cracking development, crack area ratio, maximum residual crack width, curvature of the wall panel, lateral displacement, and deformed shapes of the specimens were investigated. The results showed that the plastic damage relocation design concept was effective; the initial cracking occurred at the bottom of the precast shear wall panel (middle section) of the proposed NPSWs. The test results indicated that the crack area ratio and the maximum residual crack width of the NPSWs were less than those of the MSW. The NPSWs were deformed continuously; significant distortions did not occur in their connection regions, demonstrating the merits of the proposed NPSWs. The curvatures of the middle sections of the NPSWs were lower than that of the MSW after a drift ratio of 0.5%. Among the NPSWs, HNPSW demonstrated the best performance, as its crack area ratio, concrete damage, and maximum residual crack width were the lowest.

키워드

과제정보

This work was supported by the National Natural Science Foundation of China (52178467) and the Guangzhou Science and Technology Project (202235058,202102010459). The support is greatly appreciated.

참고문헌

  1. American Society of Civil Engineers (2017), Minimum design loads and associated criteria for buildings and other structures. (ASCE/SEI 7-16). American Society of Civil Engineers, Reston, Virginia, USA.
  2. Chiu, C.K., Sung, H.F., Chi, K.N. and Hsiao, F.P. (2019), "Experimental quantification on the residual seismic capacity of damaged RC column members", Int. J. Concrete Struct. Mater., 13, 1-22. https://doi.org/10.1186/s40069-019-0338-z.
  3. Elsayed M., Ghrib F. and Nehdi M.L. (2018), "Experimental and analytical study on precast concrete dowel connections under quasi-static loading", Construct. Build. Mater., 168, 692-704. https://doi.org/10.1016/j.conbuildmat.2018.02.140.
  4. Eom, T.S., Park, H.G., Hwang, H.J. and Kang, S.M. (2016), "Plastic hinge relocation methods for emulative PC beam-column connections", J. Struct. Eng., ASCE, 142(2), 04015111-13. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001378.
  5. GB 50010-2010 (2015), Code for design of concrete structures, China Building Industry Press, Beijing, China.
  6. GB 50011(2010), Code for seismic design of buildings, China Building Industry Press, Beijing, China.
  7. Gere, J.M. (2004), Mechanics of Materials. Thomson Learning, Inc., Belmont, USA.
  8. Ghiassi, B., Xavier, J., Oliveira, D.V. and Lourenco, P.B. (2013), "Application of digital image correlation in investigating the bond between FRP and masonry", Compos. Struct., 106, 340-349. https://doi.org/10.1016/j.compstruct.2013.06.024.
  9. Gu, A.Q., Zhou, Y., Xiao, Y., Li, Q.W. and Qu, G. (2019), "Experimental study and parameter analysis on the seismic performance of self-centering hybrid reinforced concrete shear walls", Soil Dyn. Earthq. Eng., 116, 409-420. https://doi.org/10.1016/j.soildyn.2018.10.003.
  10. Gu, Q., Dong, G., Wang, X., Jiang, H.B. and Peng, S.M. (2019), "Research on pseudo-static cyclic tests of precast concrete shear walls with vertical rebar lapping in grout-filled constrained hole", Eng. Struct., 189, 396-410. https://doi.org/10.1016/j.engstruct.2019.03.069.
  11. Hu, Y., Zhao, J.H., Zhang, D.F. and Chen, Y.X. (2019), "Seismic behavior of concrete-filled double-skin steel tube/moment-resisting frames with beam-only-connected precast reinforced concrete shear walls", Archiv. Civil Mech. Eng., 19(4), 967-980. https://doi.org/10.1016/j.acme.2019.04.009.
  12. Iverson, J.K. and Hawkins, N.M. (1994), "Performance of precast/prestressed concrete building structures during Northridge earthquake". PCI J., 39, 38-55. http://worldcat.org/oclc/12789822. https://doi.org/10.15554/pcij.03011994.38.55
  13. JGJ 82 (2011), Technical specification for high strength bolt connections of steel structures, China Building Industry Press, Beijing, China.
  14. Kanemoto, K., Sone, D., Sakata, H. and Wada, A. (2002), "Experimental study on crack damage of RC column subjected to seismic loadings", Japan Concrete Institute Annu. Convention, 24(2), 265-270.
  15. Kang, S.M., Kim, O.J. and Park, H.G. (2013), "Cyclic loading test for emulative precast concrete walls with partially reduced rebar section", Eng. Struct., 56, 1645-1657. https://doi.org/10.1016/j.engstruct.2013.07.036.
  16. Maheri, M.R. and Torabi, A. (2019), "Retrofitting external RC beam-column joints of an ordinary MRF through plastic hinge relocation using FRP laminates", Structures, 22, 65-75. https://doi.org/10.1016/j.istruc.2019.08.004.
  17. Mccormac, J.C. and Brown, R.H. (2014), Design of Reinforced Concrete. John Wiley & Sons. Inc., Hoboken. USA.
  18. Megid, W.A. and Khayat, K.H. (2020), "Variations in surface quality of self-consolidation and highly workable Sconcretes with formwork material", Construct. Build. Mater., 238, 117638. https://doi.org/10.1016/j.conbuildmat.2019.117638.
  19. Menegon, S.J., Wilson, J.L., Lam, N.T.K. and Gad EF. (2020), "Experimental testing of innovative panel-to-panel connections for precast concrete building cores", Eng. Struct., 207, 110239. https://doi.org/10.1016/j.engstruct.2020.110239.
  20. Mohammad, R. and Zdenek, P.B. (2019), "Size effect of squat shear walls extrapolated by microplane model M7", ACI Struct. J., 116(3), 75-84.
  21. Mukai, T., Kabeyasawa, T., Tani, M., Suwada, H. and Fukuyama, H. (2017), "Residual seismic capacity of ductile frame with wing walls based on full-scale loading test", Bull. New Zealand Soc. Earthq. Eng., 50(4), 565-573. https://doi.org/10.5459/bnzsee.50.4.565-573.
  22. Nazari, M., Sritharan, S. and Aaleti, S. (2016), "Single precast concrete rocking walls as earthquake force-resisting elements", Earthq. Eng. Struct. Dyn., 46(5), 753-769. https://doi.org/10.1002/eqe.2829.
  23. Peng, Y.Y., Qian, J.R. and Wang, Y.H. (2016), "Cyclic performance of precast concrete shear walls with a mortar-sleeve connection for longitudinal steel bars", Mater. Struct., 49(6), 2455-2469. https://doi.org/10.1617/s11527-015-0660-0.
  24. Schubel, P.J., Warrior, N.A. and Elliott, K.S. (2008), "Evaluation of concrete mixes and mineral additions when used with controlled permeable formwork", Construct. Build. Mater., 22, 1536-1542. https://doi.org/10.1016/j.conbuildmat.2007.03.029.
  25. Seifi, P., Henry, R.S. and Ingham, J.M. (2016), "Panel connection details in existing New Zealand precast concrete buildings", Bull. New Zealand Soc. Earthq. Eng., 49, 190-199. https://doi.org/10.5459/bnzsee.49.2.190-199.
  26. SESOC Interim Design Guidance (2013), Design of conventional structural systems following the Canterbury earthquakes. Structural Engineering Society of the New Zealand Society, New Zealand.
  27. Shiradhonkar, S.R. and Sinha, R. (2018), "Maximum and residual flexural crack width estimation in reinforced concrete frame members under seismic excitation", J. Struct. Eng., ASCE, 144(8), 04018121. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002116.
  28. Sorensen, J.H., Herfelt, M.A., Hoang, L.G. and Muttoni, A. (2018), "Test and lower bound modeling of keyed shear connections in RC shear walls", Eng. Struct., 155, 115-126. https://doi.org/10.1016/j.engstruct.2017.11.004.
  29. Su, H., Zhu, L., Wang, Y., Feng, L., Gao, Z., Guo, Y. and Yuan, H. (2022), "Seismic behavior of energy dissipation shear wall with CFST column elements", Steel Compos. Struct., 43(1), 55-66. https://doi.org/10.12989/scs.2022.43.1.055.
  30. Wang, J.J., Tao, M.X. and Nie, X. (2017), "Fracture energy-based model for average crack spacing of reinforced concrete considering size effect and concrete strength variation", Construct. Build. Mater., 148, 398-410. https://doi.org/10.1016/j.conbuildmat.2017.05.082.
  31. Wang, X., Li, F., Wan, L. and Li, T. (2021), "Hysteretic performance of a novel composite wall panel consisted of a light-steel frame and aerated concrete blocks", Steel Compos. Struct., 41(6), 861-871. https://doi.org/10.12989/scs.2021.41.6.000.
  32. Wang, Z., Pan, W. and Zhang, Z.Q. (2020), "High-rise modular buildings with innovative precast concrete shear walls as a lateral force resisting system", Structures, 26, 39-53. https://doi.org/10.1016/j.istruc.2020.04.006.
  33. Wei, M., Xie, J. and Liu, W. (2021), "Buckling-restrained steel plate shear walls using recycled aggregate concrete: Experimental and analytical study", Steel Compos. Struct., 41(2), 249-265. https://doi.org/10.12989/SCS.2021.41.2.249.
  34. Wu, M., Liu, X., Liu, H.T. and Du, X.L. (2020), "Seismic performance of precast short-leg shear wall using a grouting sleeve connection", Eng. Struct., 208, 110338. https://doi.org/10.1016/j.engstruct.2020.110338.
  35. Xu, G.S., Wang, Z., Wu, B., Bursi, O.S., Tan, X.J., Yang, Q.B., Wen, L. and Jiang, H.B. (2017), "Pseudo dynamic tests with substructuring of a full-scale precast box-modularized structure made of reinforced concrete shear walls", Struct. Des. Tall Spec. Build., 26(16), e1354. https://doi.org/https://doi.org/10.1002/tal.1354.
  36. Zhi, Q., Guo, Z.X., Xiao, Q.D., Yuan, F. and Song, J.R. (2017), "Quasi-static test and strut-and-tie modeling of precast concrete shear walls with grouted lap-spliced connections", Construct. Build. Mater., 150, 190-203. https://doi.org/10.1016/j.conbuildmat.2017.05.183.
  37. Zhou, X.P., Zhang, J.Z., Qian, Q.H. and Niu, Y. (2019), "Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques", J. Struct. Geology, 126, 129-145. https://doi.org/10.1016/j.jsg.2019.06.003.