Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Simulation Study on the Safety of a Fastening Device of Agricultural By-product Collector

동역학 시뮬레이션을 통한 농업부산물 수집기 체결장치의 안전성 분석

  • Jeong-Hun Kim (Department of Biosystems Engineering, Kangwon National University) ;
  • Seok-Joon Hwang (Department of Biosystems Engineering, Kangwon National University) ;
  • Ju-Seok Nam (Department of Biosystems Engineering, Kangwon National University)
  • Received : 2023.08.16
  • Accepted : 2023.08.25
  • Published : 2023.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the safety of fastening device for the agricultural by-product collector was evaluated according to the driving ground conditions by deriving the stress, static safety factor, and fatigue life using dynamic simulation. A 3D modeling of agricultural by-product collector was carried out, and simulation model was developed by applying the material properties. As a result of dynamic simulation, the magnitude of the maximum stress generated in the fastening device was the highest when driving on the flat off-road, followed by sloped pave-road and flat pave-road. Static safety factor and fatigue life were the highest when driving on the flat pave-road, followed by sloped pave-road and flat off-road. The safety of fastening device was confirmed that static safety factor was more than 1.0 and service life exceeded 9 years in all driving ground conditions.

Keywords

Acknowledgement

본 결과물은 농림축산식품부의 재원으로 농림식품기술기획평가원의 밭농업 기계화 촉진기술개발사업의 지원을 받아 연구되었음(RS-2023-00236724).

References

  1. G. S. Han, S. M. Lee and S. J. Shin, "Densified Pellet Fuel using Woody Core of Industrial Hemp (Cannabis sativa L.) as an Agricultural Waste," Korean J. Plant Res., Vol.22, No.4, pp.293-298, 2009 
  2. J. K. Kim, "The Status of Sustainable Biofuels Policy and Development," Korean Ind. Chem. News, Vol.16, No.2, pp.1-15, 2013 
  3. S. M. Beak, W. S. Kim, S. Y. Baek, H. H. Jeon, D. H. Lee, H. K. Kim and Y. J. Kim, "Analysis of Engine Load Factor for a 78 kW Class Agricultural Tractor According to Agricultural Operations," J. Drive Control, Vol.19, No.1, pp.16-25, 2022 
  4. C. G. Lee, S. Y. Lee, S. Y. Joo, L. H. Cho, S. Y. Park, S. H. Lee, K. C. Oh and D. H. Kim, "A Study on Agricultural By-products for Biomass-to-energy Conversion and Korean Collecting Model," Renew. Energ., Vol.13, No.1, pp.27-35, 2017  https://doi.org/10.7849/ksnre.2017.3.13.1.027
  5. J. Y. Cha, M. Ali, Y. S. Hong, B. K. Yu, S. H. Lee, H. Seonwoo and H. J. Kim, "Development of a Pelletizing System of Fermented TMR for Pig Feeding," J. Biosyst. Eng., Vol.43, No.2, pp.119-127, 2018 
  6. D. K. Patel, M. H. Kim and K. T. Lim, "Synthesis and Characterization of Eggshell-Derived Hydroxyapatite Bioceramics," J. Biosyst. Eng., Vol.44, No.2, pp.128-133, 2019  https://doi.org/10.1007/s42853-019-00017-x
  7. A. Alahakoon, A. Karunarathna, R. Dharmakeerthi and F. Silva, "Design and Development of a Double-chamber Down Draft(DcDD) Pyrolyzer for Biochar Production from Rice Husk," J. Biosyst. Eng., Vol.47, No.4, pp.458-467, 2022  https://doi.org/10.1007/s42853-022-00159-5
  8. S. Y. Park, S. J. Kim, K. C. Oh, Y. K. Jeon, Y. M. Kim, A. Y. Cho, D. H. Lee, C. S. Jang, and D. H. Kim, "Biochar from Agro-byproducts for Use as a Soil Amendment and Solid Biofuel," J. Biosyst. Eng., Vol.48, pp.93-103, 2023  https://doi.org/10.1007/s42853-023-00175-z
  9. J. H. Kim, M. K. Jang and J. S. Nam, "Fatigue Life Analysis for Agricultural By-product Collector," J Agri Life Environ Sci., Vol.33, No.3, pp.347-356, 2021 
  10. D. Xuhua, W. Y. Kim and K. H. Lee, "Drone-Based Three-Dimensional Photogrammetry and Concave Hull by Slices Algorithm for Apple Tree Volume Mapping," J. Biosyst. Eng., Vol.46, No.4, pp.474-484, 2021  https://doi.org/10.1007/s42853-021-00120-y
  11. D. K. Noh, D. W. Lee and J. S. Jang, "Analysis of Surplus Flow in a Hydraulic System Applied to a Self-propelled Spinach Harvester," J. Drive Control, Vol.19, No.1, pp.26-33, 2022 
  12. S. Y. Park, S. Y. Lee, S. Y. Joo, L. H. Cho, K. C. Oh, S. H. Lee, I. S. Jeon, C. G. Lee, S. J. Hong, S. J. Kim and D. H. Kim, "Simulation & Model Validation of Torrefaction Process and Analysis of the Fuel Properties for Pepper Stem," Renew. Energ., Vol.13, No.4, pp.64-70, 2017 
  13. J. G. Kim, E. S. Cheung, S. Seo, W. S. Kang, J. S. Ham and S. C. Lee, "Effects of Management Practice on the Quality of Round Baled Oat Silage," Kor. Grassl. Forage. Sci., Vol.20, No.3, pp.185-192, 2000 
  14. S. J. Hwang, J. H. Kim and J. S. Nam, "Factorial Experiment for the Collecting Device of an Agricultural By-product Collector," J. Biosyst. Eng., Vol.45, pp.422-431, 2020  https://doi.org/10.1007/s42853-020-00081-8
  15. J. H. Kim, M. Sri and J. S. Nam, "Safety Evaluation on a Fastening Device of an Agricultural By-Product Collector for Hard Flat Ground Driving," Agriculture, Vol.12, No.7, pp.1071, 2022 
  16. G. H. Han, D. K. Kim, D. V. Ahn and Y. J. Park, "Comparative Analysis of Tractor Ride Vibration According to Suspension System Configuration," J. Biosyst. Eng., Vol.48, No.1, pp.69-78, 2023  https://doi.org/10.1007/s42853-022-00165-7
  17. S. Zeeshan and T. Aized, "Performance Analysis of Path Planning Algorithms for Fruit Harvesting Robot," J. Biosyst. Eng., Vol.48, pp.178-197, 2023  https://doi.org/10.1007/s42853-023-00184-y
  18. D. Yilmaz, E. Hamamci, D. Salik and Y. Ahiskali, "Structural Analysis of Agricultural Machinery: A Case Study For a Transport Chassis of a Spraying Machine," J. Agric. Mach. Sci., Vol.7, No.4, pp.405-409, 2011 
  19. S. P. Moon, S. M. Baek, N. G. Lee, S. U. Park, Y. S. Choi, C. H. Choi and Y. J. Kim, "Safety Factor Analysis of Range-Shift on Multi-Purpose Agricultural Implement Machinery," J. Drive Control, Vol.17, No.4, pp.141-151, 2020 
  20. H. W. Han, J. S. Oh, H. J. Yoo and S. B. Shim, "Strength Evaluation of the Tractor Differential Case Under Braking Load," J Agri Life Environ Sci., Vol.34, No.1, pp.9-16, 2022 
  21. D. S. Paraforos, H. W. Griepentrog, S. G. Vougioukas, and D. Kortenbruck, "Fatigue Life Assessment of a Four-rotor Swather based on Rainflow Cycle Counting," Biosyst. Eng., Vol.217, pp.1-10, 2014  https://doi.org/10.1016/j.biosystemseng.2014.08.006
  22. F. U. Yunfei, J. Gong, Z. Deming, L. Yijun, H. Hui and H. Maofang, "Fatigue Damage of a Cutter Used for Cutting Cashew Nut Under Rand Load," Appl. Mech. Mater., Vol.743, pp.49-54, 2015  https://doi.org/10.4028/www.scientific.net/AMM.743.49
  23. W. S. Kim, Y. S. Kim and Y. J. Kim, "Analysis of the Load of a Transplanter PTO Shaft Based on the Planting Distance," J. Fac. Agric. Kyushu Univ., Vol.63, No.1, pp.97-102, 2018  https://doi.org/10.5109/1911182
  24. J. G. Won, J. I. Yoon, H. A. Lee, S. G. Chung and J. S. Jeong, "Simulation Analysis on Static Safety of 55Hp-Servo-Based Hydrostatic Transmission," J. Drive Control, Vol.19, No.1, pp.34-42, 2022 
  25. J. S. Noh, Y. J. Cho, T. S. Kim, D. H. Lee and K. S. Lee, "Driving Running Stability of Orchard Aerial Lift by Using Recurdyn that is Analysis Tool," In Proc. Conf. Korean Soc. Agric. Mach., Vol.17, No.1, pp.153-159, 2012 
  26. J. W. Hofstee and W. Huisman, "Handling and Spreading of Fertilizers Part 1:Physical Properties of Fertilizers in Relation to Particle Motion," J. Agric. Eng. Res., Vol.47, pp.213-234, 1990  https://doi.org/10.1016/0021-8634(90)80043-T
  27. R. C. Junivall and K. M. Marshek, Machine Component Design 5th ed., Jogn Willey&Sons, Hoboken, pp. 831-895, 2012 
  28. R. Olieslagers, H. Ramon, and J. De Baerdmaeker, "Calculation of Fertilizer Distribution Patterns from a Spinning Disc Spreader by Means of a Simulation Model," Int. J. Agric. Biol. Eng., Vol.63, No.2, pp.137-152, 1996  https://doi.org/10.1006/jaer.1996.0016
  29. R. Hossein, M. Mahmood and A. Hadi, "Simulation of Draught Force During Chisel Ploughing Using Discrete Element Method," J. Biosyst. Eng., Vol.47, No.2, pp.152-166, 2022  https://doi.org/10.1007/s42853-022-00133-1
  30. Y. B. Lee, G. C. Lee, J. J. Lee, S. Y. Lim and W. J. Kim, "A Study on the Acceleration Durability Test of In-Wheel Drive Gearbox for Military Special Vehicles," J. Drive Control, Vol.19, No.3, pp.32-38, 2022 
  31. Z. Yaojuan, C. Kai, Z. Peng and W. Zhilin, "Research on the Simulation of the Driving System of Crawler Bulldozer," In Proc. Conf. TMEE, pp.703-706, 2011 
  32. A. Wang, Z. Gu and X. Sun, "Dynamic Simulation of Acceleration for a Four Sprocket Electric Tracked Vehicle under Different Pavement Conditions," In Proc. Conf. ITEC, pp.1-4, 2014 
  33. R. G. Budynas and J. K. Nisbett, Shigley's Mechanical Engineering Design 9th ed., Mcgraw-Hill, New York, pp.10-15, 2011 
  34. M. Sri, S. J. Hwang and J. S. Nam, "Experimental Safety Analysis of Transplanting Device of the Cam-type Semi-automatic Vegetable Transplanter," J. Terramechanics, Vol.103, pp.19-32. 2022  https://doi.org/10.1016/j.jterra.2022.07.001
  35. W. S. Lee and H. W. Lee, "A Study on the Prediction of the Fatigue Life of a Lug through the Finite Element Analysis," J. Korean Soc. Precis. Eng., Vol.15, No.10, pp.88-95, 1998 
  36. Y. H. Lee, J. H. Lee, K. S. Lee, K. R. Kim and S. J. Lee, "Ergonomic Risk Factors Related to Musculoskeletal Symptoms in the Vineyard Workers," J. Korean Soc. Occup. Environ. Hyg., Vol.18, pp.122-132, 2008 
  37. NAAS, A Study of Useful Life for Agricultural Machinery, National Institute of Agricultural Sciences, Wanju, South Korea, pp.10-17, 2017