DOI QR코드

DOI QR Code

Fully coupled multi-hull/mooring/riser/hawser time domain simulation of TLP-TAD system with MR damper

  • Muhammad Zaid Zainuddin (Department of Ocean Engineering, Texas A&M University) ;
  • Moo-Hyun Kim (Department of Ocean Engineering, Texas A&M University) ;
  • Chungkuk Jin (Department of Ocean Engineering, Texas A&M University) ;
  • Shankar Bhat (Offshore Structures, Hull, Riser & Mooring (OHR&M) Deepwater Projects Shell Petroleum Development Company)
  • 투고 : 2023.11.19
  • 심사 : 2023.12.17
  • 발행 : 2023.12.25

초록

Reducing hawser line tensions and dynamic responses to a certain level is of paramount importance as the hawser lines provide important structural linkage between 2 body TLP-TAD system. The objective of this paper is to demonstrate how MR Damper can be utilized to achieve this. Hydrodynamic coefficients and wave forces for two bodies including second-order effects are obtained by 3D diffraction/radiation panel program by potential theory. Then, multi-hull-riser-mooring-hawser fully-coupled time-domain dynamic simulation program is applied to solve the complex two-body system's dynamics with the Magneto-Rheological (MR) Damper modeled on one end of hawser. Since the damping level of MR Damper can be changed by inputting different electric currents, various simulations are conducted for various electric currents. The results show the reductions in maximum hawser tensions with MR Damper even for passive control cases. The results also show that the hawser tensions and MR Damper strokes are affected not only by input electric currents but also by initial mooring design. Further optimization of hawser design with MR Damper can be done by active MR-Damper control with changing electric currents, which is the subject of the next study.

키워드

과제정보

The author would like to acknowledge Shell for providing the guidance on practical application of this work to the industry realistic issues. This work was also partly supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2017R1A5A1014883).

참고문헌

  1. Bitaraf, M., Ozbulut, O.E., Hurlebaus, S. and Barroso, L. (2009), "Application of semi-active control strategies for seismic protection of buildings with MR dampers", Eng. Struct., 32(10), 3040-3041. https://doi.org/10.1016/j.engstruct.2010.05.023.
  2. Cummins, W.E. (1962), "The impulse response function and ship motions", Symposium on Ship Theory, Hamburg.
  3. Jin, C., Kang, H., Kim, M. and Bakti, F.P. (2020), "Performance evaluation of surface riding wave energy converter with linear electric generator", Ocean Eng., 218, 1-16. https://doi.org/10.1016/j.oceaneng.2020.108141.
  4. Kang, H.S. (2015), Semi-Active Magneto-Rheological Damper and Applications in Tension Leg Platform/Semi-Submersible, College Station, Texas: Texas A&M University.
  5. Kang, H.S., Kim, M.H. and Bhat, S. (2017), "Tension variations of hydro-pneumatic riser tensioner and implications for dry-tree interface in semisubmersible", Ocean Syst. Eng., 7(1), 21-38. https://doi.org/10.12989/ose.2017.7.1.021.
  6. Kang, H.S.,. Kim, M.H., Bhat, S. and Kang, H.Y. (2013), "Semi-active magneto-rheological damper to reduce the dynamic response of top-tension risers", International Society of Offshore and Polar Engineers (ISOPE), Anchorage.
  7. Kim, M.H. and Yue, D.K.P. (1990), "The complete second-order diffraction solution for an axisymmetric body Part 2. bichromatic incident waves and body motions", J. Fluid Mech., 211, 557-593. https://doi.org/10.1017/S0022112090001690.
  8. Kim, M.H. and Yue, K.P. (1991), "Sum- and difference-frequency wave loads on a body in unidirectional Gaussian seas", J. Ship Res,, 35(2), 127-140. https://doi.org/10.5957/jsr.1991.35.2.127.
  9. Kim, M.H., Koo, B.J., Mercier, R.M. and Ward, E.G. (2005), "Vessel/mooring/riser coupled dynamic analysis of a turret-moored FPSO compared with OTRC experiment", Ocean Eng., 32(14-15), 1780-1802. https://doi.org/10.1016/j.oceaneng.2004.12.013.
  10. Kim, M.H., Ran, Z. and Zheng, W. (2001), "Hull/mooring coupled dynamic analysis of a truss spar in time domain", Int. J. Offshore Polar Eng., 11(1), 42-54.
  11. Koo, B.J., Kim, M.H. and Randall, R.E. (2004), "The effect of nonlinear multi-contact coupling with gap between risers and guide frames on global spar motion analysis", Ocean Eng., 31(11-12), 1469-1502. https://doi.org/10.1016/j.oceaneng.2004.01.002.
  12. Krenk, S. (2000), "Vibrations of a taut cable with an external damper", J. Appl. Mech., 67(4), 772-776. https://doi.org/10.1115/1.1322037.
  13. Main, J.A. and Jones, N.P. (2007), "Vibration of tensioned beams with intermediate damper. I: Formulation, influence of damper location", J. Eng.Mech., 133(4), 1-10. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:4(369).
  14. Ran, Z. (2000), Coupled Dynamic Analysis of Floating Structures in Waves and Currents, College Station, Texas: Texas A&M University.
  15. Ran, Z., Kim, M.H., Niedzwecki, J.M. and Johnson, R.P. (1996), "Response of a spar platform in random waves and currents (Experiment vs. Theory)", Int. J. Offshore Polar., 6(1), 27-34.
  16. Ravikiran, K., Amurol, S. and Tan, H. (2018), "Design and operation of coupled mooring system for tender-assisted drilling at Malikai TLP", Proceedings of the Offshore Technology Conference, Houston.
  17. Sarrafan, A., Zareh, S.H., Khayyat, A.A.A. and Zabihollah, A. (2012), "Neuro-fuzzy control strategy for an offshore steel jacket platform subjected to wave-induced forces using magnetorheological dampers", Mech. Sci. Technol., 26(4), 1179-1196. https://doi.org/10.1007/s12206-012-0212-2.
  18. Shan, D., Chai, Y.H., Zhou, X. and Khan, I. (2019), "Tension identification of suspenders with supplemental dampers for through and half-through arch bridges under construction", J. Struct. Eng., 145(3), 1-11. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002255.
  19. Wang, D.H. and Liao, W.H. (2011), "Magnetorheological fluid dampers: A review of parameteric modelling", Smart Mater. Struct., 20(2). https://doi.org/10.1088/0964-1726/20/2/023001.
  20. Wu, B., Shi, P., Wang, Q., Guan, X. and Ou, J. (2010), "Performance of an offshore platform with MR dampers subjected to ice and earthquake", Struct. Control Health Monit., 18(6), 682-697. https://doi.org/10.1002/stc.398.
  21. Yang, C.K. and Kim, M.H. (2009), "Linear and nonlinear approach of hydropneumatic tensioner modeling for spar global performance", J. Offshore Mech. Arcti., 132(1), 21.
  22. Yang, M.G., Li, C.Y. and Chen, Z.Q. (2013), "A new simple non-linear hysteretic model for MR damper and verification of seismic response reduction experiment", Eng. Struct., 52, 434-445. https://doi.org/10.1016/j.engstruct.2013.03.006.
  23. Yang, M.G., Li, C.Y. and Chen, Z.Q. (2013), "A new simple non-linear hysteretic model for MR damper and verification of seismic response reduction experiment", Eng. Struct., 52, 434-445. https://doi.org/10.1016/j.engstruct.2013.03.006.
  24. Zainuddin, Z., Kim, M.H., Kang, H.Y. and Bhat, S. (2018), "Incorporating magneto-rheological damper into riser tensioner system to restrict riser stroke in moderate-size semisubmersibles", Proceedings of the Offshore Technology Conference, Houston.