Steel and Composite Structures

  • 제48권2호
  • /
  • Pages.207-233
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic analysis of a coupled steel-concrete composite box girder bridge-train system considering shear lag, constrained torsion, distortion and biaxial slip

  • Li Zhu (School of Civil Engineering, Beijing Jiaotong University) ;
  • Ray Kai-Leung Su (Department of Civil Engineering, The University of Hong Kong) ;
  • Wei Liu (School of Civil Engineering, Beijing Jiaotong University) ;
  • Tian-Nan Han (School of Civil Engineering, Beijing Jiaotong University) ;
  • Chao Chen (School of Civil Engineering, Beijing Jiaotong University)
  • 투고 : 2021.09.02
  • 심사 : 2023.04.19
  • 발행 : 2023.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Steel-concrete composite box girder bridges are widely used in the construction of highway and railway bridges both domestically and abroad due to their advantages of being light weight and having a large spanning ability and very large torsional rigidity. Composite box girder bridges exhibit the effects of shear lag, restrained torsion, distortion and interface bidirectional slip under various loads during operation. As one of the most commonly used calculation tools in bridge engineering analysis, one-dimensional models offer the advantages of high calculation efficiency and strong stability. Currently, research on the one-dimensional model of composite beams mainly focuses on simulating interface longitudinal slip and the shear lag effect. There are relatively few studies on the one-dimensional model which can consider the effects of restrained torsion, distortion and interface transverse slip. Additionally, there are few studies on vehicle-bridge integrated systems where a one-dimensional model is used as a tool that only considers the calculations of natural frequency, mode and moving load conditions to study the dynamic response of composite beams. Some scholars have established a dynamic analysis model of a coupled composite beam bridge-train system, but where the composite beam is only simulated using a Euler beam or Timoshenko beam. As a result, it is impossible to comprehensively consider multiple complex force effects, such as shear lag, restrained torsion, distortion and interface bidirectional slip of composite beams. In this paper, a 27 DOF vehicle rigid body model is used to simulate train operation. A two-node 26 DOF finite beam element with composed box beams considering the effects of shear lag, restrained torsion, distortion and interface bidirectional slip is proposed. The dynamic analysis model of the coupled composite box girder bridge-train system is constructed based on the wheel-rail contact relationship of vertical close-fitting and lateral linear creeping slip. Furthermore, the accuracy of the dynamic analysis model is verified via the measured dynamic response data of a practical composite box girder bridge. Finally, the dynamic analysis model is applied in order to study the influence of various mechanical effects on the dynamic performance of the vehicle-bridge system.

키워드

과제정보

The research described in this paper was financially supported by the Projects of Open Fund of National Key Laboratory of High-Speed Railway Track Technology of China (2021YJ048) and Central Guidance for Local Science and Technology Development of China (226Z0801G).

참고문헌

  1. Biscontin, G., Morassi, A. and Wendel, P. (2000), "Vibrations of steel-concrete composite beams", J. Vib. Control, 6(5), 691-714. https://doi.org/10.1177/107754630000600503.
  2. Dezi, L., Gara, F., Leoni, G. and Tarantino, A.M. (2001), "Time dependent analysis of shear-lag effect in composite beams", ASCE-J. Eng. Mech., 127(1), 71-79. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:1(71).
  3. Dezi, L., Gara, F. and Leoni, G. (2003), "Shear-lag effect in twin-girder composite decks", Steel Compos. Struct., 3(2), 111-122. https://doi.org/10.12989/scs.2003.3.2.111.
  4. Dezi, L. and Leoni, G. (2006), "Effective slab width in prestressed twin-girder composite decks", ASCE-J. Struct. Eng., 132(9), 1358-1370. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1358).
  5. Gara, F., Leoni, G. and Dezi, L. (2009), "A beam finite element including shear lag effect for the time-dependent analysis of steel-concrete composite decks", Eng. Struct., 31(8), 1888-1902. https://doi.org/10.1016/j.engstruct.2009.03.017.
  6. Gara, F., Ranzi, G. and Leoni, G. (2010). "Short- and long-term analytical solutions for composite beams with partial interaction and shear-lag effects", Int. J. Steel Struct., 10(4), 359-372. https://doi.org/10.1007/BF03215844.
  7. Girhammar, U.A. and Pan, D.H. (1993), "Dynamic analysis of composite members with interlayer slip", Int. J. Solids Struct., 30(6), 797-823. https://doi.org/10.1016/0020-7683(93)90041-5.
  8. Girhammar, U.A., Pan, D.H. and Anders, G. (2009), "Exact dynamic analysis of composite beams with partial interaction", Int. J. Mech. Sci., 51(8), 565-582. https://doi.org/10.1016/j.ijmecsci.2009.06.004.
  9. Guo, J.Q., Fang, Z.Z. and Zheng, Z. (2008), Design Theory of Box Girder, China Communication Press. (in Chinese).
  10. Henriques, D., Goncalves, R. and Camotim, D. (2015), "A physically non-linear GBT-based finite element for steel and steel-concrete beams including shear lag effects", Thin-Wall. Struct., 90, 202-215. https://doi.org/10.1016/j.tws.2015.01.010.
  11. Hou, Z., Xia, H., Wang, Y., Zhang, Y. and Zhang, T. (2015), "Dynamic analysis and model test on steel-concrete composite beams under moving loads", Steel Compos. Struct., 18(3), 565-582. https://doi.org/10.12989/scs.2015.18.3.565.
  12. Karoumi, R. and Ulker-Kaustell, M. (2011), "Application of the continuous wavelet transform on the free vibrations of a steel-concrete composite railway bridge", Eng. Struct., 33(3), 911-919. https://doi.org/10.1016/j.engstruct.2010.12.012.
  13. Liu, K., Reynders, E., Roeck, G.D. and Lombaert, G. (2009), "Experimental and numerical analysis of a composite bridge for high-speed trains", J. Sound Vib., 320, 201-220. https://doi.org/10.1016/j.jsv.2008.07.010.
  14. Nakai, H. and Yoo, C.H. (1988), Analysis and Design of Curved Steel Bridges, New York, McGraw-Hill Co.
  15. Novozhilov, V.V. and Radok, J.M.R. (2014), Thin Shell Theory, London: Springer.
  16. Shen, X., Chen, W., Wu, Y. and Xu, R. (2011), "Dynamic analysis of partial-interaction composite beams", Compos. Sci. Technol., 71(10), 1286-1294. https://doi.org/10.1016/j.compscitech.2011.04.013.
  17. Sun, F.F. and Bursi, O. (2005), "Displacement-based and two-field mixed variational formulation for composite beams with shear lag", ASCE-J. Eng. Mech., 131(2), 199-210. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:2(199).
  18. Wang, G.M., Zhu, L., Ji, X.L. and Ji, W.Y. (2020), "Finite beam element for curved steel-concrete composite box beams considering time-dependent effect", Materials, 13(15), 3253. https://doi.org/10.3390/ma13153253.
  19. Wang, H.L. and Zhu, E.Y. (2018), "Dynamic response analysis of monorail steel-concrete composite beam-train interaction system considering slip effect", Eng. Struct., 160, 257-269. https://doi.org/10.1016/j.engstruct.2018.01.037.
  20. Wang, J., Ren, J. and Zhang, Y. (2019), "Vibration analysis of carbon fiber-reinforced steel-concrete composite beams considering shear-slip effects", Int. J. Struct. Stab. Dyn., 19(7), 1950077. https://doi.org/10.1142/S0219455419500779.
  21. Vlasov, V.Z. (1961), Thin-Walled Elastic Beams, Jerusalem: Israel Program for Scientific Translation.
  22. Xia, H., Roeck, G.D. and Goicolea, J.M. (2012), Bridge Vibration and Controls: New Research, New York: Nova Science Publishers Inc.
  23. Zhou, W., Jiang, L. and Yu, Z. (2013), "Analysis of free vibration characteristic of steel-concrete composite box-girder considering shear lag and slip", J. Central South Univ., 20(9), 2570-2577. https://doi.org/10.1007/s11771-013-1770-x.
  24. Zhu, L., Nie, J.G. and Ji, W.Y. (2017), "Positive and negative shear lag behaviors of composite twin-girder decks with varying cross-section", Sci. China Technol. Sci., 60(1), 1-17. https://doi.org/10.1007/s11431-016-0314-x.
  25. Zhu, L. and Su, R.K.L. (2017), "Analytical solutions for composite beams with slip, shear-lag and time-dependent effects", Eng. Struct., 152, 559-578. https://doi.org/10.1016/j.engstruct.2017.08.071.
  26. Zhu, L., Wang, H.L., Han, B., Zhao, G.Y., Huo, X.J. and Ren, X. Z. (2020), "Dynamic analysis of a coupled steel-concrete composite box girder bridge-train system considering slip and shear-lag", Thin-Wall. Struct., 157, 107060. https://doi.org/10.1016/j.tws.2020.107060.
  27. Zhu, L., Wang, J.J., Li, M.J., Chen, C. and Wang, G.M. (2020), "Finite beam element with 22 DOF for curved composite box girders considering torsion, distortion, and biaxial slip", Archiv. Civil Mech. Eng., 20, 101. https://doi.org/10.1007/s43452-020-00098-y.
  28. Zhu, L., Ma, Q., Yan, W. T. and Han, B. (2021), "Effective flange width of steel-concrete composite beams under negative moments in the normal service stage", Steel Compos. Struct., 38(4), 415-430. https://doi.org/10.12989/scs.2021.38.4.415.
  29. Zhu, L., Wang, J. J., Li, M. J., Han, B., Tang, L. and Chen, C. (2021), "Finite beam element with 26 DOFs for curved composite box girders considering constrained torsion, distortion, shear lag and biaxial slip", Eng. Struct., 232, 111797. https://doi.org/10.1016/j.engstruct.2020.111797.