Steel and Composite Structures

  • 제48권1호
  • /
  • Pages.19-25
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Application of computer methods for the effects of nanoparticles on the frequency of the concrete beams experimentally and numerically

  • Chencheng Song (College of Civil Engineering, Architecture and Environment, Hubei University of Technology) ;
  • Junfeng Shi (College of Civil Engineering, Architecture and Environment, Hubei University of Technology) ;
  • Ibrahim Albaijan (Mechanical Engineering Department, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University) ;
  • H. Elhosiny Ali (Department of Physics, Faculty of Science, King Khalid University) ;
  • Amir Behshad (Faculty of Technology and Mining, Yasouj University)
  • 투고 : 2021.02.23
  • 심사 : 2023.07.04
  • 발행 : 2023.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

Due to high application of concrete structures in construction industry, however, the quality improvement is essential. One of the new ways for this purpose is adding the nanoparticles to the concrete. In this work, vibration analysis of concrete beams reinforced by graphene oxide (GO) nanoparticles based on mathematical model has been investigated. For the accuracy of the presented model, the experimental study is done for comparing the compressive strength. Since the nanoparticles can not be solved in water without any specific process, at the first, GO nanoparticles should be dispersed in water by using shaker, magnetic striker, ultrasonic devices and finally mechanical mixer. For modelling of the strucuture, sinusoidal shear deformation beam theory (SSDBT) is utilized. Mori-Tanak model model is utilized for obtaining the effective properties of the beam including agglomeration influences. Utilizing the energy method and Hamilton's principal, the motion equations are calculated. The frequency of the concrete beam is obtanied by analytical method. Three samples with 0.02% GO nanoparticles are built and its compressive strength is compared which shows a good accuracy with maximum 1.29% difference with mathematical model and other papers. The aim of this work from the theoretical study is investigating the effects of nanoparticles volume percentage and agglomeration, length and thickness of the beam on the frequency of the structure. The results show that the with enhancing the GO nanoparticles, the frequency is increased. For example, with enhancing the volume percent of GO nanoparticles from zero to 0.08%, the compressive strength is increased 48.91%. and 46.83%, respectively for two cases of with and without agglomeration.

키워드

참고문헌

  1. Formica, G., Lacarbonara, W. and Alessi, R. (2010), "Vibrations of carbon nanotube reinforced composites", J. Sound Vib., 329, 1875-1889, https://doi.org/10.1016/j.jsv.2009.11.020.
  2. Henkhaus, K., Pujol, S. and Ramirez, J. (2013), "Axial failure of reinforced concrete beams damaged by shear reversals", J. Struct. Eng., 73, 1172-1180. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000673.
  3. Jafarian Arani, A. and Kolahchi, R. (2016), "Buckling analysis of embedded concrete beams armed with carbon nanotubes", Comput. Conc., 17, 567-578. https://doi.org/10.12989/cac.2016.17.5.567.
  4. Kadoli, R. and Ganesan, N. (2003), "Free vibration and buckling analysis of composite cylindrical shells conveying hot fluid", Compos. Struct., 60, 19-32, https://doi.org/10.1016/S0263-8223(02)00313-6.
  5. Karaca, Z. and Turkeli, E. (2014), "The slenderness effect on wind response of industrial reinforced concrete chimneys", Wind Struct., 18(3), 281-294. https://doi.org/10.12989/was.2014.18.3.281.
  6. Kolahchi, R. and Moniribidgoli, A.M. (2016c), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8.
  7. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016b), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186, https://doi.org/10.1016/j.compstruct.2016.08.032.
  8. Kolahchi, R., Rabani Bidgoli, M., Beygipoor, G.H. and Fakhar, M.H. (2013), "A nonlocal nonlinear analysis for buckling in embedded FG-SWCNT-reinforced microplates subjected to magnetic field", J. Mech. Sci. Tech., 5, 2342-2355. https://doi.org/10.1007/s12206-015-0811-9.
  9. Kolahchi, R., Safari, M. and Esmailpour, M. (2016a), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023.
  10. Liew, K.M., Lei, Z.X., Yu, J.L. and Zhang, L.W. (2014), "Postbuckling of carbon nanotube-reinforced functionally graded cylindrical panels under axial compression using a meshless approach", Comput. Methods Appl. Mech. Engrg., 268, 1-17. https://doi.org/10.1016/j.cma.2013.09.001.
  11. Matsuna, H. (2007), "Vibration and buckling of cross-ply laminated composite circular cylindrical shells according to a global higher-order theory", Int. J. Mech. Sci., 49, 1060-1075, https://doi.org/10.1016/j.ijmecsci.2006.11.008.
  12. Mirza, S. and Skrabek, B. (1991), "Reliability of short composite beam strength interaction", J. Struct. Eng., 117(8), 2320-2339, https://doi.org/10.1061/(ASCE)0733-9445(1991)117:8(2320).
  13. Seo, Y.S., Jeong, W.B.,Yoo, W.S. and Jeong, H.K. (2015), "Frequency response analysis of cylindrical shells conveying fluid using finite element method", J. Mech. Sci. Tech., 19, 625-633, https://doi.org/10.1007/BF02916184.
  14. Solhjoo, S. and Vakis, A.I. (2015(, "Single asperity nanocontacts: Comparison between molecular dynamics simulations and continuum mechanics models", Computat. Mat. Sci., 99, 209-220. https://doi.org/10.1016/j.commatsci.2014.12.010.
  15. Taherifar, R., Zareei, S.A., Rabani Bidgoli, M. and Kolahchi, R. (2020), "Seismic analysis in pad concrete foundation reinforced by nanoparticles covered by smart layer utilizing plate higher order theory", Steel Compos. Struct., 37, 99-115, http://dx.doi.org/10.12989/scs.2020.37.1.099.
  16. Tan, P. and Tong, L. (2001), "Micro-electromechanics models for piezoelectric-fiber-reinforced composite materials", Compos. Sci. Tech., 61, 759-769. https://doi.org/10.1016/S0266-3538(01)00014-8.
  17. Thai, H.T. (2012), "A nonlocal beam theory for bending, buckling, and vibration of nanobeams", Int. J. Eng. Sci., 52, 56-64. https://doi.org/10.1016/j.ijengsci.2011.11.011.
  18. Thai, H.T. and Vo, T.P. (2012), "A nonlocal sinusoidal shear deformation beam theory with application to bending, buckling, and vibration of nanobeams", Int. J. Eng. Sci., 54, 58-66. https://doi.org/10.1016/j.ijengsci.2012.01.009.
  19. Wuite, J. and Adali, S. (2005), "Deflection and stress behaviour of nanocomposite reinforced beams using a multiscale analysis", Compos. Struct., 71, 388-396. https://doi.org/10.1016/j.compstruct.2005.09.011.
  20. Yang, Y. and Li, H. (2020), "Experimental study on shear behaviors of partial precast steel reinforced concrete beams", Steel Compos. Struct., 37, 605-620, http://dx.doi.org/10.12989/scs.2020.37.5.605.
  21. Zamanian, M., Kolahchi, R. and Rabani Bidgoli, M. (2017), "Agglomeration effects on the buckling behaviour of embedded concrete beams reinforced with SiO2 nanoparticles", Wind Struct., 24, 43-57. http://dx.doi.org/10.12989/was.2017.24.1.043.