참고문헌
- Kim, K., "Bioenergy Crop Production and Research Trends," J Plant Biotechnol, 34, 103-109(2007). https://doi.org/10.5010/JPB.2007.34.2.103
- Antunes, R. A. and de Oliveira, M. C. L., "Corrosion in Biomass Combustion: A Materials Selection Analysis and Its Interaction with Corrosion Mechanisms and Mitigation Strategies," Corrosion Science, 76, 6-26(2013). https://doi.org/10.1016/j.corsci.2013.07.013
- Niu, Y. and Tan, H., "Ash-related Issues During Biomass Combustion: Alkali-induced Slagging, Silicate Melt-induced Slagging (ash fusion), Agglomeration, Corrosion, Ash Utilization, and Related Countermeasures," Progress in Energy and Combustion Science, 52, 1-61(2016). https://doi.org/10.1016/j.pecs.2015.09.003
- Sandberg, J., Fdhila, R. B., Dahlquist, E. and Avelin, A., "Dynamic Simulation of Fouling in a Circulating Fluidized Biomass-fired Boiler," Applied Energy, 88(5), 1813-1824(2011). https://doi.org/10.1016/j.apenergy.2010.12.006
- Vainio, E., Kinnunen, H., Lauren, T., Brink, A., Yrjas, P., DeMartini, N. and Hupa, M., "Low-temperature Corrosion in co-combustion of Biomass and Solid Recovered Fuels," Fuel, 184, 957-965(2016). https://doi.org/10.1016/j.fuel.2016.03.096
- Lee, S. H., Themelis, N. J. and Castaldi, M. J., "High-temperature Corrosion in Waste-to-energy Boilers," Journal of Thermal Spray Technology, 16, 104-110(2007).
- Choi, Y., Jun, H., Shin, J. S., Han, K. H., Bae, D. H., Hwang, B. W., Kim, H. J. and Shun, D., "Effects of Boron Compounds on Decomposition of Chlorides to Control Clinkers Under Solid Refuse Fuel Combustion Conditions," Energy, 210, 118607(2020).
- Enestam, S., Bankiewicz, D., Tuiremo, J., Makela, K. and Hupa, M., "Are NaCl and KCl Equally Corrosive on Superheater Materials of Steam Boilers?," Fuel, 104, 294-306(2013). https://doi.org/10.1016/j.fuel.2012.07.020
- Imran, M., "Effect of Corrosion on Heat Transfer Through Boiler Tube and Estimating Overheating," International Journal of Advanced Mechanical Engineering, 4(6), 629-638(2014).
- Kinnunen, H., Hedman, M., Engblom, M., Lindberg, D., Uusitalo, M., Enestam, S. and Yrjas, P., "The Influence of Flue Gas Temperature on Lead Chloride Induced High Temperature Corrosion," Fuel, 196, 241-251(2017). https://doi.org/10.1016/j.fuel.2017.01.082
- Lindberg, D., Backman, R., Chartrand, P. and Hupa, M., "Towards a Comprehensive Thermodynamic Database for Ash-forming Elements in Biomass and Waste Combustion - Current Situation and Future Developments," Fuel Processing Technology, 105, 129-141(2013). https://doi.org/10.1016/j.fuproc.2011.08.008
- Skrifvars, B. J., Backman, R., Hupa, M., Salmenoja, K. and Vakkilainen, E., "Corrosion of Superheater Steel Materials Under Alkali Salt Deposits Part 1: The Effect of Salt Deposit Composition and Temperature," Corrosion Science, 50(5), 1274-1282(2008). https://doi.org/10.1016/j.corsci.2008.01.010
- Skrifvars, B. J., Westen-Karlsson, M., Hupa, M. and Salmenoja, K., "Corrosion of Super-heater Steel Materials Under Alkali Salt Deposits. Part 2: SEM Analyses of Different Steel Materials," Corrosion Science, 52(3), 1011-1019(2010). https://doi.org/10.1016/j.corsci.2009.11.026
- Viklund, P., Hjornhede, A., Henderson, P., Stalenheim, A. and Pettersson, R., "Corrosion of Superheater Materials in a Waste-to-energy Plant," Fuel Processing Technology, 105, 106-112(2013). https://doi.org/10.1016/j.fuproc.2011.06.017
- Xin, Y. A. N. G., HUANG, J. J., FANG, Y. T. and Yang, W. A. N. G., "Slagging Characteristics of Fly Ash from Anthracite Gasification in Fluidized Bed," Journal of Fuel Chemistry and Technology, 41(1), 1-8(2013). https://doi.org/10.1016/S1872-5813(13)60009-2
- Bang, J., Kim, Y., Kim, S. R., Shin, D., Cho, K. and Kwon, W., "High Temperature Corrosion Properties of Heating Surface in Waste-to-energy Boiler Tube," J. Korea Soc Waste Manag, 34, 27-33(2017). https://doi.org/10.9786/kswm.2017.34.1.27
- Chatha, S. S., Sidhu, H. S. and Sidhu, B. S., "High Temperature Hot Corrosion Behaviour of NiCr and Cr3C2-NiCr Coatings on T91 Boiler Steel in An Aggressive Environment at 750 C," Surface and Coatings Technology, 206(19-20), 3839-3850(2012). https://doi.org/10.1016/j.surfcoat.2012.01.060
- Fantozzi, D., Matikainen, V., Uusitalo, M., Koivuluoto, H. and Vuoristo, P., "Chlorine-induced High Temperature Corrosion of Inconel 625 Sprayed Coatings Deposited with Different Thermal Spray Techniques," Surface and Coatings Technology, 318, 233-243(2017). https://doi.org/10.1016/j.surfcoat.2016.12.086
- Okoro, S. C., Montgomery, M., Frandsen, F. J. and Pantleon, K., "Influence of Preoxidation on High Temperature Corrosion of a Ni-based Alloy Under Conditions Relevant to Biomass Firing," Surface and Coatings Technology, 319, 76-87(2017). https://doi.org/10.1016/j.surfcoat.2017.03.068
- Oksa, M., Auerkari, P., Salonen, J. and Varis, T., "Nickel-based HVOF Coatings Promoting High Temperature Corrosion Resistance of Biomass-fired Power Plant Boilers," Fuel Processing Technology, 125, 236-245(2014).
- Oksa, M., Tuurna, S. and Varis, T., "Increased Lifetime for Biomass and Waste to Energy Power Plant Boilers with HVOF Coatings: High Temperature Corrosion Testing Under Chlorine-containing Molten Salt," Journal of Thermal Spray Technology, 22, 783-796 (2013). https://doi.org/10.1007/s11666-013-9928-5
- Shukla, V. N., Jayaganthan, R. and Tewari, V. K., "Degradation Behavior of HVOF-sprayed Cr3C2-25% NiCr Cermet Coatings Exposed to High Temperature Environment," Materials Today: Proceedings, 2(4-5), 1805-1813(2015). https://doi.org/10.1016/j.matpr.2015.07.048
- Varis, T., Bankiewicz, D., Yrjas, P., Oksa, M., Suhonen, T., Tuurna, S., Ruusuvuori K. and Holmstrom, S., "High Temperature Corrosion of Thermally Sprayed NiCr and FeCr Coatings Covered with a KCl-K2SO4 Salt Mixture," Surface and Coatings Technology, 265, 235-243(2015). https://doi.org/10.1016/j.surfcoat.2014.11.012
- Zhou, W., Zhou, K., Deng, C., Zeng, K. and Li, Y., "Hot Corrosion Behaviour of HVOF-sprayed Cr3C2-NiCrMoNbAl Coating," Surface and Coatings Technology, 309, 849-859(2017). https://doi.org/10.1016/j.surfcoat.2016.10.076
- Dudziak, T., Hussain, T., Simms, N. J., Syed, A. U. and Oakey, J. E., "Fireside Corrosion Degradation of Ferritic Alloys at 600 C in Oxy-fired Conditions," Corrosion Science, 79, 184-191(2014). https://doi.org/10.1016/j.corsci.2013.11.005