DOI QR코드

DOI QR Code

Prediction of acoustic field induced by a tidal turbine under straight or oblique inflow via a BEM/FW-H approach

  • Seungnam Kim (Ocean Engineering Group, Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin) ;
  • Spyros A. Kinnas (Ocean Engineering Group, Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin)
  • 투고 : 2022.12.15
  • 심사 : 2023.05.13
  • 발행 : 2023.06.25

초록

This study investigates the influence of loading and inflow conditions on tidal turbine performance from a hydrodynamic and hydroacoustic point of view. A boundary element method is utilized for the former to investigate turbine performance at various loading conditions under zero/non-zero yaw inflow. The boundary element method is selected as it has been selected, tested, and validated to be computationally efficient and accurate for marine hydrodynamic problems. Once the hydrodynamic solutions are obtained, such as the time-dependent surface pressures and periodic motion of the turbine blade, they are taken as the known noise sources for the subsequence hydroacoustic analysis based on the Ffowcs Williams-Hawkings formulation given in a form proposed by Farassat. This formulation is coupled with the boundary element method to fully consider the three-dimensional shape of the turbine and the speed of sound in the acoustic analysis. For validations, a model turbine is taken from a reference paper, and the comparison between numerical predictions and experimental data reveals satisfactory agreement in hydrodynamic performance. Importantly, this study shows that the noise patterns and sound pressure levels at both the near- and far-field are affected by different loading conditions and sensitive to the inclination imposed in the incoming flow.

키워드

과제정보

Support for this research was provided by the U.S. Office of Naval Research (Grant Number N00014-21-1-2488; Dr. Yin Lu Young) and by Phases VIII and IX of the "Consortium on Cavitation Performance of High-Speed Propulsors."

참고문헌

  1. Bahaj, A.S., Molland, A.F., Chaplin, J.R. and Batten, W.M.J. (2007), "Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank", Renew. Energ., 32(3), 407-426. https://doi.org/10.1016/j.renene.2006.01.012
  2. Baltazar, J., and Falcao de Campos, J.A.C. (2011), "Hydrodynamic analysis of a horizontal axis marine current turbine with a boundary element method", J. Offshore Mech. Arct., 133. http://dx.doi.org/10.1115/1.4003387.
  3. Ebrahimi, A., Seif, M.S. and Nouri-Borujerdi, A. (2019), "Hydrodynamic and acoustic performance analysis of marine propellers by combination of panel method and FW-H equations", Math. Comput. Appl., 24(81), 1-18.
  4. Farassat, F. (2007), "Derivation of Formulations 1 and 1A of Farassat: NASA/TM-2007-214853", Tech. Rep.
  5. Ffowcs-Williams, J.E. and Hawkings, D.L. (1969), "Sound generated by turbulence and surfaces in arbitrary motion", Philos. T. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci., 264(1151), 321-341.
  6. Gottsche, U., Lampe, T., Scharf, M. and Abdel-Maksoud, M. (2019), "Evaluation of underwater sound propagation of a catamaran with cavitating propellers", Proceedings of the 6th International Symposium on Marine Propulsors (SMP'19), Rome, Italy, May 26-30.
  7. Haxel, J., Zang, X., Martinez, J., Polagye, B., Staines, G., Deng, Z.D., Wosnik, M. and O'Byrne, P. (2022), "Underwater noise measurements around a tidal turbine in a busy port setting", J. Mar. Sci. Eng., 10(5). http://doi.org/10.3390/jmse10050632.
  8. Kerwin, J.E. and Lee, C. (1978), "Prediction of steady and unsteady marine propeller performance by numerical lifting-surface theory", Trans. Society of Naval Architects and Marine Engineers: Jersey City, NJ, USA, 86, 218-256.
  9. Kim, S. and Kinnas, S.A. (2022b), "Numerical prediction of propeller-induced noise in open water and ship behind conditions", Ocean Eng., 261, 112122. https://doi.org/10.1016/j.oceaneng.2022.112122.
  10. Kim, S. and Kinnas, S.A. (2022c), "Numerical prediction of underwater noise on a flat hull induced by twin or podded propeller systems", J. Sound Vib., 539, 117256. http://doi.org/10.1016/j.jsv.2022.117256.
  11. Kim, S., Kumar, K.S. and Kinnas, S.A. (2023), "Hydrodynamic analysis of ducted marine turbine: Study on the duct and turbine efficiency", Proceedings of the 28th SNAME Offshore Symposium, Houston, Texas, Mar. 8.
  12. Kim, S., Su, Y. and Kinnas, S.A. (2021), "A BEM/RANS interactive method applied to an axial tidal turbine farm", J. Ship Res., 65(4), 320-345. http://dx.doi.org/10.5957/JOSR.04180018.
  13. Kim, S., Wu, T.S. and Kinnas, S.A. (2022a), "Design and analysis of tidal turbines via a nonlinear optimization technique coupled with a BEM", Proceedings of the 27th SNAME Offshore Symposium, Houston, Texas, Feb. 22.
  14. Kinnas, S.A., Yu, X. and Tian, Y. (2012), "Prediction of propeller performance under high loading conditions with viscous/inviscid Interaction and a new wake alignment model", Proceedings of the 29th Symposium on Naval Hydrodynamics, Gothenburg, Sweden, Aug. 26-31.
  15. Lloyd, T.P. (2013), "Large eddy simulations of inflow turbulence noise: application to tidal turbines", Ph.D. Dissertation, University of Southampton, United Kingdom.
  16. Lloyd, T.P., Turnock, S.R. and Humphrey, V.F. (2014), "Assessing the influence of inflow turbulence on noise and performance of a tidal turbine using large eddy simulations", Renew. Energ., 71, 742-754. https://doi.org/10.1016/j.renene.2014.06.011.
  17. Lossent, J., Lejart, M., Folegot, T., Clorennec, D., Di Iorio, L. and Gervaise, C. (2018), "Underwater operational noise level emitted by a tidal current turbine and its potential impact on marine fauna", Mar. Pollut. Bull., 131, 323-334. https://doi.org/10.1016/j.marpolbul.2018.03.024.
  18. Menendez Aran, D.H., Tian, Y. and Kinnas, S.A. (2019), "Effect of wake Alignment on turbine blade loading distribution and power coefficient", J. Offshore Mech. Arct., 141(4). http://dx.doi.org/10.1115/1.4041669.
  19. Otto, W., Rijpkema, D. and Vaz, G. (2012), "Viscous-flow calculations on an axial marine current turbine", Proceedings of the ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, Rio de Janeiro, Brazil, July 1-6.
  20. Risch, D., van Geel, N., Gillespie, D. and Wilson, B. (2020), "Characterisation of underwater operational sound of a tidal stream turbine", J. Acoust. Soc. Am., 147(4). http://doi.org/10.1121/10.0001124.
  21. Schmitt, P., Elsaesser, B., Coffin, M., Hood, J. and Starzmann, R. (2015), "Field testing a full-scale tidal turbine Part 3: Acoustic characteristics", Proceedings of the 11th European Wave and Tidal Energy Conference, Nantes, France, Sept. 9.
  22. Seol, H., Jung, B., Suh, J. and Lee, S. (2002), "Prediction of non-cavitating underwater propeller noise", J. Sound Vib., 257(110), 131-156. https://doi.org/10.1006/jsvi.2002.5035
  23. Shi, W., Atlar, M., Rosli, R., Aktas, B. and Norman, R. (2016), "Cavitation observations and noise measurements of horizontal axis tidal turbines with biomimetic blade leading-edge designs", Ocean Eng., 121, 143-155. https://doi.org/10.1016/j.oceaneng.2016.05.030.
  24. Testa, C., Lanniello, S. and Salvatore, F. (2018), "A Ffowcs Williams and Hawkings formulation for hydroacoustic analysis of propeller sheet cavitation", J. Sound Vib., 413, 421-441. https://doi.org/10.1016/j.jsv.2017.10.004
  25. Wu, T. S., Kim, S. and Kinnas, S. A. (2023), "Numerical prediction of skin friction coefficient by coupling a BEM with X-Foil: Effect on the hydrofoil and propeller performance", Proceedings of the 28th SNAME Offshore Symposium, Houston, Texas, Mar. 8.
  26. Young, Y.L., Motley, M.R. and Yeung, R.W. (2010), "Three-dimensional numerical modeling of the transient fluid-structural interaction response of tidal turbines", J. Offshore Mech Arct., 132(1). http://doi.org/10.1115/1.3160536.