Advances in nano research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Accuracy improvement in motion tracking of tennis balls using nano-sensors technology

  • Shuning Yan (Sports Department of Hubei Polytechnic University) ;
  • Chaozong Xiang (College of physical education and health, Chongqing Metropolitan College of Science and Technology) ;
  • Li Guo (Manufacturing Management Department, DONGFENG-CITRO AUTOMOBILE COMPANY LTD)
  • Received : 2022.01.05
  • Accepted : 2022.07.07
  • Published : 2023.05.25
⟨ Previous Next ⟩

Abstract

Tracking the motion of tennis balls is a challenging task in using cameras around the tennis court. The most important instance of the tennis trajectory is the time of impact and touch the court which in some cases could not be detected precisely. In the present study, we aim to present a novel design of tennis balls equipped with nano-sensors to detect the touch of the ball to the court. In the impact instance, tennis ball receives significant acceleration and change in the linear momentum. This large acceleration could deform a small-beam structure with piezoelectric layer to produce voltage. The voltage could further be utilized to produce infrared waves which could be easily detected by infrared detection sensors installed on the same video cameras or separately near the tennis court. Therefore, the exact time of the impact could be achieved with higher accuracy than image analyzing method. A detailed dynamical property of such sensors is discussed using nonlinear beam equations. The results show that within the acceleration range of tennis ball during an impact, the piezoelectric patches of the nano-sensors in the tennis ball could produce enough voltages to propagate infrared waves to be detected by infrared detectors.

Keywords

References

  1. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of gpls-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251
  2. Akgoz, B. and Civalek, O . (2011), "Strain gradient elasticity and modified couple stress models for buckling analysis of axially loaded micro-scaled beams", Int. J. Eng. Sci., 49(11), 1268-1280. https://doi.org/10.1016/j.ijengsci.2010.12.009
  3. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 112990. https://doi.org/10.1016/j.compstruct.2020.112990
  4. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7
  5. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 113146. https://doi.org/10.1016/j.compstruct.2020.113146
  6. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 113152. https://doi.org/10.1016/j.compstruct.2020.113152
  7. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020e), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin Wall. Struct., 107242. https://doi.org/10.1016/j.tws.2020.107242
  8. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020f), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111
  9. Al-Furjan, M.S.H., Bolandi, S.Y., Habibi, M., Ebrahimi, F., Chen, G. and Safarpour, H. (2021), "Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01255-w
  10. Al-Furjan, M.S.H., Habibi, M., Ebrahimi, F., Chen, G., Safarpour, M. and Safarpour, H. (2020g), "A coupled thermomechanics approach for frequency information of electrically composite microshell using heat-transfer continuum problem", Eur. Phys. J. Plus, 135(10), 837. https://doi.org/10.1140/epjp/s13360-020-00764-3
  11. Al-Furjan, M.S.H., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020h), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111
  12. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343
  13. Amelirad, O. and Assempour, A. (2019), "Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets", J. Manuf. Pr., 47, 310-323. https://doi.org/10.1016/j.jmapro.2019.09.035
  14. Amelirad, O. and Assempour, A. (2021), "Coupled continuum damage mechanics and crystal plasticity model and its application in damage evolution in polycrystalline aggregates", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01346-2
  15. Archana, M. and Geetha, M.K. (2015), "Object detection and tracking based on trajectory in broadcast tennis video", Procedia Comput. Sci., 58, 225-232. https://doi.org/10.1016/j.procs.2015.08.060
  16. Arefi, M. (2018), "Nonlocal free vibration analysis of a doubly curved piezoelectric nano shell", Steel Compos. Struct., 27(4), 479-493. https://doi.org/10.12989/SCS.2018.27.4.479
  17. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9
  18. Barretta, R., Fazelzadeh, S.A., Feo, L., Ghavanloo, E. and Luciano, R. (2018), "Nonlocal inflected nano-beams: A stress-driven approach of bi-Helmholtz type", Compos. Struct., 200, 239-245. https://doi.org/10.1016/j.compstruct.2018.04.072
  19. Bendine, K., Boukhoulda, F.B., Nouari, M. and Satla, Z. (2016), "Active vibration control of functionally graded beams with piezoelectric layers based on higher order shear deformation theory", Earthq. Eng. Eng. Vib., 15(4), 611-620. https://doi.org/10.1007/s11803-016-0352-y
  20. Bruant, I. and Proslier, L. (2016), "Optimal location of piezoelectric actuators for active vibration control of thin axially functionally graded beams", Int. J. Mech. Mater. Des., 12(2), 173-192. https://doi.org/10.1007/s10999-015-9297-y
  21. Burdess, J.S. and Fawcett, J.N. (1992), "Experimental Evaluation of a Piezoelectric Actuator for the Control of Vibration in a Cantilever Beam", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 206(2), 99-106. https://doi.org/10.1243/PIME_PROC_1992_206_315_02
  22. Cao, B., Fan, S., Zhao, J., Tian, S., Zheng, Z., Yan, Y. and Yang, P. (2021a), "Large-scale many-objective deployment optimization of edge servers", IEEE T. Intell. Transp. Syst., 22(6), 3841-3849. https://doi.org/10.1109/TITS.2021.3059455
  23. Cao, B., Li, M., Liu, X., Zhao, J., Cao, W. and Lv, Z. (2021b), "Many-objective deployment optimization for a drone-assisted camera network", IEEE T. Netw. Sci. Eng., 8(4), 2756-2764. https://doi.org/10.1109/TNSE.2021.3057915
  24. Cao, K., Wang, B., Ding, H., Lv, L., Dong, R., Cheng, T. and Gong, F. (2020), "Improving physical layer security of uplink NOMA via energy harvesting jammers", IEEE T. Inform. Forensics Secur., 16, 786-799. https://doi.org/10.1109/TIFS.2020.3023277
  25. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022a), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 115195. https://doi.org/10.1016/j.compstruct.2022.115195
  26. Chen, P., Pei, J., Lu, W. and Li, M. (2022b), "A deep reinforcement learning based method for real-time path planning and dynamic obstacle avoidance", Neurocomputing, 497 64-75. https://doi.org/10.1016/j.neucom.2022.05.006
  27. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.w., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct., 1-24. https://doi.org/10.1080/15397734.2020.1744005
  28. Conaire, C.O., Kelly, P., Connaghan, D. and Connor, N.E.O. (2009), "TennisSense: A platform for extracting semantic information from multi-camera tennis data", Proceedings of the 16th International Conference on Digital Signal Processing, July.
  29. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175
  30. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 113599. https://doi.org/10.1016/j.compstruct.2021.113599
  31. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017
  32. Ebrahimi, F. and Barati, M.R. (2017), "Flexural wave propagation analysis of embedded S-FGM nanobeams under longitudinal magnetic field based on nonlocal strain gradient theory", Arab. J. Sci. Eng., 42(5), 1715-1726. https://doi.org/10.1007/s13369-016-2266-4
  33. Ebrahimi, F., Barati, M.R. and Dabbagh, A. (2016), "A nonlocal strain gradient theory for wave propagation analysis in temperature-dependent inhomogeneous nanoplates", Int. J. Eng. Sci., 107, 169-182. https://doi.org/10.1016/j.ijengsci.2016.07.008
  34. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4
  35. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323
  36. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9
  37. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex Med., 1-27. https://doi.org/10.1080/17455030.2019.1694729
  38. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x
  39. Eltaher Mohamed, A., Omar, F.A., Abdraboh Azza, M., Abdalla Waleed, S. and Alshorbagy Amal, E. (2020), "Mechanical behaviors of piezoelectric nonlocal nanobeam with cutouts", Smart Struct. Syst., 25(2), 219-228. https://doi.org/10.12989/SSS.2020.25.2.219
  40. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct., 47(5), 521-545. https://doi.org/10.1080/15397734.2019.1566743
  41. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518
  42. Fang, J., Kong, G. and Yang, Q. (2022), "Group performance of energy piles under cyclic and variable thermal loading", J. Geotech. Geoenviron. Eng., 148(8), 04022060. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002840
  43. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310
  44. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4
  45. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723
  46. Habibi, M., Darabi, R., Sa, J.C.d. and Reis, A. (2021a), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686
  47. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. 10.22060/MEJ.2016.664
  48. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7
  49. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. https://doi.org/10.1177/1464420716642258
  50. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1
  51. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Pr., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009
  52. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x
  53. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 1-30.
  54. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2021b), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 49(6), 811-840. https://doi.org/10.1080/15397734.2019.1701490
  55. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct., 1-19. https://doi.org/10.1080/15397734.2019.1697932
  56. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct., 1-22. https://doi.org/10.1080/15397734.2020.1779086
  57. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125
  58. Hadjesfandiari, A.R. and Dargush, G.F. (2011), "Couple stress theory for solids", Int. J. Solids Struct., 48(18), 2496-2510. https://doi.org/10.1016/j.ijsolstr.2011.05.002
  59. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Med., 1-27. https://doi.org/10.1080/17455030.2019.1662968
  60. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019
  61. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput.,
  62. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021a), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3
  63. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021b), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7
  64. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021c), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y
  65. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x
  66. Jirasek, M. (2004), "Nonlocal theories in continuum mechanics", Acta Polytechnica, 44(5-6). https://doi.org/10.14311/610
  67. Kargarnovin, M.H., Najafizadeh, M.M. and Viliani, N.S. (2007), "Vibration control of a functionally graded material plate patched with piezoelectric actuators and sensors under a constant electric charge", Smart Mater. Struct., 16(4), 1252-1259. https://doi.org/10.1088/0964-1726/16/4/037
  68. Karimiasl, M., Ebrahimi, F. and Mahesh, V. (2019), "Nonlinear forced vibration of smart multiscale sandwich composite doubly curved porous shell", Thin Wall. Struct., 143, 106152. https://doi.org/10.1016/j.tws.2019.04.044
  69. Karkon, M. (2018), "An efficient finite element formulation for bending, free vibration and stability analysis of Timoshenko beams", J. Brazil. Soc. Mech. Sci. Eng., 40(10), 497. https://doi.org/10.1007/s40430-018-1413-0
  70. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631
  71. Lam, D.C.C., Yang, F., Chong, A.C.M., Wang, J. and Tong, P. (2003), "Experiments and theory in strain gradient elasticity", J. Mech. Phys. Solids, 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X
  72. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y
  73. Li, J., Xu, K., Chaudhuri, S., Yumer, E., Zhang, H. and Guibas, L. (2017), "Grass: Generative recursive autoencoders for shape structures", ACM Transact. Graphics (TOG), 36(4), 1-14. https://doi.org/10.1145/3072959.3073637
  74. Li, L., Hu, Y. and Ling, L. (2015), "Flexural wave propagation in small-scaled functionally graded beams via a nonlocal strain gradient theory", Compos. Struct., 133, 1079-1092. https://doi.org/10.1016/j.compstruct.2015.08.014
  75. Li, T., Shang, D., Gao, S., Wang, B., Kong, H., Yang, G., Shu, W., Xu, P. and Wei, G. (2022), "Two-dimensional material-based electrochemical sensors/biosensors for food safety and biomolecular detection", Biosensors, 12(5), 314. https://doi.org/10.3390/bios12050314
  76. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w
  77. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8
  78. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2
  79. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput.,
  80. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. https://doi.org/10.1080/15397734.2020.1784201
  81. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Based Des. Struct., 1-25. https://doi.org/10.1080/15397734.2020.1815544
  82. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-01004-z
  83. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech. A Solids. 104581. https://doi.org/10.1016/j.euromechsol.2022.104581
  84. Ma, L., Liu, X. and Moradi, Z. "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9
  85. Ma, Z., Zheng, W., Chen, X. and Yin, L. (2021), "Joint embedding VQA model based on dynamic word vector", PeerJ Comput. Sci., 7, e353. https://doi.org/10.7717/peerj-cs.353
  86. Mao, J.J., Lu, H.M., Zhang, W. and Lai, S.K. (2020), "Vibrations of graphene nanoplatelet reinforced functionally gradient piezoelectric composite microplate based on nonlocal theory", Compos. Struct., 236, 111813. https://doi.org/10.1016/j.compstruct.2019.111813
  87. Melo, A.G., Pinto, M.F., Marcato, A.L.M., Biundini, I.Z. and Rocha, N.M.S. (2021), "Low-cost trajectory-based ball detection for impact indication and recording", J. Control Automat. Electr. Syst., 32(2), 367-377. https://doi.org/10.1007/s40313-020-00677-7
  88. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustainability, 14(8), 4752. https://doi.org/10.3390/su14084752
  89. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(1), 2050010. https://doi.org/10.1142/S1758825120500106
  90. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01002-1
  91. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023
  92. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251
  93. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. 10.22034/JSM.2019.665264
  94. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1926572
  95. Nadal, C. and Pigache, F. (2009), "Multimodal electromechanical model of piezoelectric transformers by Hamilton's principle", IEEE T. Ultrasonics Ferroelectr. Freq. Control, 56(11), 2530-2543. https://doi.org/10.1109/TUFFC.2009.1340
  96. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.w. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 1-12. https://doi.org/10.1080/07391102.2020.1751297
  97. Nejad, M.Z., Hadi, A. and Rastgoo, A. (2016), "Buckling analysis of arbitrary two-directional functionally graded Euler-Bernoulli nano-beams based on nonlocal elasticity theory", Int. J. Eng. Sci., 103, 1-10. https://doi.org/10.1016/j.ijengsci.2016.03.001
  98. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020a), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Rep., 10(1), 5616. https://doi.org/10.1038/s41598-020-61855-w
  99. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020b), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Rep., 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w
  100. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  101. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018a), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  102. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  103. Safarpour, H., Mohammadi, K., Ghadiri, M. and Barooti, M.M. (2018b), "Effect of porosity on flexural vibration of CNT-reinforced cylindrical shells in thermal environment using GDQM", Int. J. Struct. Stabil. Dyn., 18(10), 1850123. https://doi.org/10.1142/s0219455418501237
  104. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465
  105. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-00949-5
  106. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3
  107. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-01024-9
  108. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2021), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37(4), 3629-3648. https://doi.org/10.1007/s00366-020-01024-9
  109. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Materials, 13(7), 1707. https://doi.org/10.3390/ma13071707
  110. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586
  111. Shi, G., Araby, S., Gibson, C.T., Meng, Q., Zhu, S. and Ma, J. (2018), "Graphene platelets and their polymer composites: Fabrication, structure, properties, and applications", Adv. Funct. Mater., 28(19), 1706705. https://doi.org/10.1002/adfm.201706705
  112. Shi, X., Li, J. and Habibi, M. (2020), "On the statics and dynamics of an electro-thermo-mechanically porous GPLRC nanoshell conveying fluid flow", Mech. Based Des. Struct., 1-37. https://doi.org/10.1080/15397734.2020.1772088
  113. Shokrgozar, A., Ghabussi, A., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020a), "Viscoelastic dynamics and static responses of a graphene nanoplatelets-reinforced composite cylindrical microshell", Mech. Based Des. Struct., 1-28. https://doi.org/10.1080/15397734.2020.1719509
  114. Shokrgozar, A., Safarpour, H. and Habibi, M. (2019), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(2), 512-529. https://doi.org/10.1177/0954406219883312
  115. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020b), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(2), 512-529. https://doi.org/10.1177/0954406219883312
  116. Tang, Y., Liu, S., Deng, Y., Zhang, Y., Yin, L. and Zheng, W. (2021), "An improved method for soft tissue modeling", Biomed. Signal Pr. Control, 65, 102367. https://doi.org/10.1016/j.bspc.2020.102367
  117. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the self-healing of cementitious materials with a hydrogel system", Gels, 8(5), 278. https://doi.org/10.3390/gels8050278
  118. Wang, Q., Zhou, G., Song, R., Xie, Y., Luo, M. and Yue, T. (2022b), "Continuous space ant colony algorithm for automatic selection of orthophoto mosaic seamline network", ISPRS J. Photogram. Remote Sens., 186, 201-217. https://doi.org/10.1016/j.isprsjprs.2022.02.011
  119. Wang, W., Chen, Z. and Yuan, X. (2022c), "Simple low-light image enhancement based on Weber-Fechner law in logarithmic space", Signal Pr. Image Commun., 116742. https://doi.org/10.1016/j.image.2022.116742
  120. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022d), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech. A Solids, 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638
  121. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284
  122. Wen, F., He, T., Liu, H., Chen, H.Y., Zhang, T. and Lee, C. (2020), "Advances in chemical sensing technology for enabling the next-generation self-sustainable integrated wearable system in the IoT era", Nano Energy, 78, 105155. https://doi.org/10.1016/j.nanoen.2020.105155
  123. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6
  124. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound. Elem., 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003
  125. Xiong, Q.M., Chen, Z., Huang, J.T., Zhang, M., Song, H., Hou, X.F., Li, X.B. and Feng, Z.J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Metals, 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6
  126. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 114395. https://doi.org/10.1016/j.compstruct.2021.114395
  127. Yan, F., Kittler, J., Windridge, D., Christmas, W., Mikolajczyk, K., Cox, S. and Huang, Q. (2014), "Automatic annotation of tennis games: An integration of audio, vision, and learning", Image Vision Comput., 32(11), 896-903. https://doi.org/10.1016/j.imavis.2014.08.004
  128. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013
  129. Yang, W., Chen, X., Xiong, Z., Xu, Z., Liu, G. and Zhang, X. (2021), "A privacy-preserving aggregation scheme based on negative survey for vehicle fuel consumption data", Inform. Sci., 570, 526-544. https://doi.org/10.1016/j.ins.2021.05.009
  130. Yong, C.Y., Sudirman, R. and Chew, K.M. (2011). "Motion detection and analysis with four different detectors", Proceedomgs of the 2011 Third International Conference on Computational Intelligence, Modelling & Simulation, September.
  131. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  132. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469
  133. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1948627
  134. Zhao, H., Wang, S., Zhou, G. and Jung, W. (2019), TennisEye: Tennis Ball Speed Estimation Using a Racket-Mounted Motion Sensor, Association for Computing Machinery, Montreal, Quebec, Canada.
  135. Zhao, H., Zhu, C., Xu, X., Huang, H. and Xu, K. (2022), "Learning practically feasible policies for online 3D bin packing", Sci. China Inform. Sci., 65(1), 1-17. https://doi.org/10.1007/s11432-021-3348-6
  136. Zhao, L. and Wang, L. (2022), "A new lightweight network based on MobileNetV3", KSII Transactions on Internet and Information Systems (TIIS), 16(1), 1-15. https://doi.org/10.3837/tiis.2022.01.001
  137. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1
  138. Zheng, W., Liu, X. and Yin, L. (2021), "Research on image classification method based on improved multi-scale relational network", PeerJ Comput. Sci., 7, e613. https://doi.org/10.7717/peerj-cs.613
  139. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020a), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295
  140. Zhou, G., Bao, X., Ye, S., Wang, H. and Yan, H. (2020b), "Selection of optimal building facade texture images from UAV-based multiple oblique image flows", IEEE T. Geosci. Remote Sens., 59(2), 1534-1552. https://doi.org/10.1109/TGRS.2020.3023135
  141. Zhou, G., Yang, F. and Xiao, J. (2022), "Study on pixel entanglement theory for imagery classification", IEEE T. Geosci. Remote Sens., 60, 1-18. https://doi.org/10.1109/TGRS.2022.3167569
  142. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Clean. Prod., 132697. https://doi.org/10.1016/j.jclepro.2022.132697