Steel and Composite Structures

  • 제47권5호
  • /
  • Pages.663-677
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance evaluation of steel moment frames with self-centering energy-dissipating coupled wall panels

  • Lu Sui (School of Civil Engineering, Chang'an University) ;
  • Hanheng Wu (School of Civil Engineering, Chang'an University) ;
  • Menglong Tao (School of Civil Engineering, Chang'an University) ;
  • Zhichao Jia (School of Civil Engineering, Chang'an University) ;
  • Tianhua Zhou (School of Civil Engineering, Chang'an University)
  • 투고 : 2022.11.23
  • 심사 : 2023.05.17
  • 발행 : 2023.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The self-centering energy-dissipating coupled wall panels (SECWs) possess a dual capacity of resiliency and energy dissipation. Used in steel frames, the SECWs can localize the damage of structures and reduce residual drifts. Based on OpenSEES, the nonlinear models were established and validated by experimental results. The seismic design procedure of steel frame with SECW structures (SF-SECW) was proposed in accordance with four-level seismic fortification objectives. Nonlinear time-history response analyses were carried out to validate the reasonability of seismic design procedure for 6-story and 12-story structures. Results show that the inter-story drifts of designed structures are less than drift limits. According to incremental dynamic analyses (IDA), the fragility curves of mentioned-above structure models under different limit states were obtained. The results indicate that designed structures have good seismic performance and meet the seismic fortification objectives.

키워드

과제정보

The research described in this paper was financially supported by Natural Science Foundation of Shaanxi province, China (No. 2023-JC-YB-295), and Fundamental Research Funds of Chang'an University (No. 300102282204, No. 300102282718). The supports are gratefully acknowledged. Any opinions, findings, conclusions, and recommendations expressed in this paper are those of the writers and do not necessarily reflect the views of the sponsors.

참고문헌

  1. Chen, P., Xu, L. and Li, Z. (2021), "Study on prediction method of initial stiffness of self-centering energy dissipation braces", Eng. Struct., 247, 113226. https://doi.org/10.1016/j.engstruct.2021.113226.
  2. Chao, S., Wu, H. and Zhou, T. (2019), "Application of self-centering wall panel with replaceable energy dissipation devices in steel frames", Steel Compos. Struct., 32(2), 265-279. https://doi.org/10.12989/scs.2019.32.2.265.
  3. Dyanati, M., Huang, Q. and Roke, D. (2015), "Sesmic demand models and performance evaluation of self-centering and conventional concentrically braced frames", Eng. Struct., 84, 368-381. https://doi.org/10.1016/j.engstruct.2014.11.036.
  4. Eldin, M.N., Dereje, A.J. and Kim, J. (2020), "Seismic retrofit of RC buildings using self-centering PC frames with friction-dampers", Eng. Struct., 208, 109925. https://doi.org/10.1016/j.engstruct.2020.109925.
  5. Eldin, M.N., Dereje, A.J. and Kim, J. (2020), "Seismic retrofit of framed buildings using self-centering PC frames", J. Struct. Eng. ASCE, 146(10), 04020208. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002786.
  6. FEMA P695 (2009). Quantification of building seismic performance factors, Federal Emergency Management Agency, Washington, DC, United States of America.
  7. FEMA 273 (1997). NEHRP commentary on the guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, DC, United States of America.
  8. GB/T 228.1(2010), Metallic materials-tensile testing-Part 1: method of test at room temperature, General Administration of Quality Supervision, Inspection and Quarantine of P.R. China, Beijing, China.
  9. GB 50011(2010), Code for seismic design of buildings, Ministry of housing and urban-rural development of the P.R. China, Beijing, China.
  10. Guo, T., Wang, L., Xu, Z. and Hao, Y. (2018), "Experimental and numerical investigation of jointed self-centering concrete walls with friction connectors", Eng. Struct., 161, 192-206. https://doi.org/10.1016/j.engstruct.2018.02.028.
  11. Guo, T., Wang, J.S., Song, Y.S., Xuan, W.H. and Chen, Y.Z. (2020), "Self-centering cable brace with friction devices for enhancing seismic performance of RC frame structures", Eng. Struct., 207, 110187. https://doi.org/10.1016/j.engstruct.2020.110187.
  12. Hu, S., Wang, W. and Alam, M.S. (2022), "Performance-based seismic design method for retrofitting steel moment-resisting frames with self-centering energy-absorbing dual rocking core system", J. Constr. Steel Res., 188, 106986. https://doi.org/10.1016/j.jcsr.2022.106986.
  13. Jalali, S.A. and Darvishan, E. (2019), "Seismic demand assessment of self-centering steel plate shear walls", J. Constr. Steel Res., 162, 105738. https://doi.org/10.1016/j.jcsr.2019.105738.
  14. Jia, J., Zhang, K., Wu, S., Guo, Y., Du, X. and Wang, X. (2020), "Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions", Eng. Struct., 221, 111037. https://doi.org/10.1016/j.engstruct.2020.111037.
  15. Johnson, J., Xu, M. and Jacques E. (2021), "Predicting the self-centering behavior of hybrid FRP-steel reinforced concrete beams under blast loading", Eng. Struct., 247, 113117. https://doi.org/10.1016/j.engstruct.2021.113117.
  16. Keivan, A. and Zhang, Y. (2019), "Seismic performance evaluation of self-centering K-type and D-type eccentrically braced frame systems", Eng. Struct., 184, 301-317. https://doi.org/10.1016/j.engstruct.2019.01.087.
  17. Li, L., Li, H., Li, C., Yang, Y. and Zhang, C. (2019), "Modeling of force-displacement behavior of post-tensioned self-centering concrete connections", Eng. Struct., 198, 109538. https://doi.org/10.1016/j.engstruct.2019.109538.
  18. Mohammad, J., Tolou, K. and Carlos, C.N. (2022), "Performance design of reinforced concrete shear walls detailed with self-centering reinforcement", Eng. Struct., 252, 113533. https://doi.org/10.1016/j.engstruct.2022.113533.
  19. Sun, G. and Zhu, Y. (2021), "Cyclic testing of an innovative self-centering X-braced ductile shear panel", Eng. Struct., 244, 112732. https://doi.org/10.1016/j.engstruct.2021.112732.
  20. Wang, Y., Zhou, Z., Zhang, L. and Xie Q. (2021), "Quantification of higher mode effects of steel frame and control method using dual self-centering variable friction damper brace", Eng. Struct., 240, 112368. https://doi.org/10.1016/j.engstruct.2021.112368.
  21. Wu, H., Sui, L., Zhou, T., Huang, B. and Li, X. (2021), "A novel self-centering energy-dissipating wall panel with framed beams as boundaries", Eng. Struct., 232, 111864. https://doi.org/10.1016/j.engstruct.2021.111864.
  22. Wu, H., Zhu, X., Zhou, Y., Djerrad, A., Chen, Y. and Ke, X. (2021), "Seismic fragility assessment of self-centering hybrid precast walls subjected to mainshock-aftershock sequences", Soil Dyn. Earthq. Eng., 150, 106941. https://doi.org/10.1016/j.soildyn.2021.106941.
  23. Wu, H., Wang, J., Sui, L., Zhou, T. and Bai, Y. (2020), "Experimental investigation of self-centering steel reinforced concrete coupled wall panels with replaceable energy dissipaters", Eng. Struct., 212, 110473. https://doi.org/10.1016/j.engstruct.2020. 110473.
  24. Wu, H., Zhou, T. and Sui, L. (2019), "Experimental study reports on steel frame with self-centering concrete wall panel structures", Proceedings of Science and Technology Reports, Xi'an, China.
  25. Xie, X., Xu, L. and Li, Z. (2020), "Hysteretic model and experimental validation of a variable damping self-centering brace", J. Constr. Steel Res., 167, 105965. https://doi.org/10.1016/j.jcsr.2020.105965.
  26. Xiao, S., Xu, L. and Li, Z. (2020), "Development and experimental verification of self-centering shear walls with disc spring devices", Eng. Struct., 213, 110622. https://doi.org/10.1016/j. engstruct.2020.110622.
  27. Xu, L., Chen, P. and Li, Z. (2021), "Development and validation of a versatile hysteretic model for pre-compressed self-centering buckling-restrained brace", J. Constr. Steel Res., 177, 106473. https://doi.org/10.1016/j.jcsr.2021.1064723.
  28. Xu, L., Liu, J. and Li, Z. (2021), "Parametric analyses and failure mode of steel plate shear wall with self-centering braces", Eng. Struct., 237, 112151. https://doi.org/10.1016/j.engstruct.2021.112151.
  29. Yang, Y., Feng, S., Xue, Y. and Yu, Y. (2021), "Experimental investigation on the seismic behavior of innovative self-centering precast steel-concrete hybrid frames", Eng. Struct., 239, 112222. https://doi.org/10.1016/j.engstruct.2021.112222.
  30. Zhang, Y. and Xu, L. (2022), "Cyclic response of a self-centering RC wall with tension-compression-coupled disc spring devices", Eng. Struct., 250, 113404. https://doi.org/10.1016/j.engstruct.2022.113404.
  31. Zhou, Y. and Gu, A. (2019), "Displacement-based seismic design of self-centering shear walls under four-level seismic fortifications", J. Build. Struct., 40(3), 118-126.
  32. Zhang, G., Xu, L. and Li, Z. (2021), "Theoretical and parametric studies of a self-centering modular steel structure connection", Eng. Struct., 247, 113146. https://doi.org/10.1016/j.engstruct.2021. 113146.
  33. Zhang, D., Li, N. and Zhang, S. (2021), "Energy dissipation and resilience of precast segmented concrete-filled steel tube self-centering column: Parameter study and design methodology", Eng. Struct., 244, 112747. https://doi.org/10.1016/j.engstruct.2021.112747.