Acknowledgement
This work was supported by a research grant provided by KEPCO Nuclear Fuel (No. 12116).
References
- J.H. Park, Nuclear Chemical Engineering, first ed., Hans House, Seoul, 2012, p. 373.
- J.A. Seneda, F.F. Figueiredo, A. Abrao, F.M.S. Carvalho, E.U.C. Frajndlich, Recovery of uranium from the filtrate of 'ammonium diuranate' prepared from uranium hexafluoride, J. Alloys. Compd. 323-324 (2001) 838-841. https://doi.org/10.1016/S0925-8388(01)01156-2
- K.C. Jeong, T.J. Kim, J.H. Choi, J.H. Park, S.T. Hwang, A study on the waste treatment from a nuclear fuel powder conversion plant, J. Korean Ind. Eng. Chem. 7 (1996) 1167-1168.
- L.K. Felker, R.J. Vedder, E.A. Walker, E.D. Collins, in: Montpellier Atalante (Ed.), Product Conversion: The Link between Separations and Fuel Fabrication, 2008. France, May 19-22.
- W.H. Hedley, R.J. Roehrs, W.T. Trask Jr., Production of uranium dioxide by flame denitration, Ind. Eng. Chem. Process. Des. Dev. 3 (1964) 11-14. https://doi.org/10.1021/i260009a005
- K. Dvoeglazov, Y. Kulyako, S. Vinokurov, B. Myasoedov, M. Dmitriev, O. Ushakov, Y. Mochalov, A. Shadrin, P. Smolkin, Synthesis of mixed actinide oxides using microwave radiation, Energies 15 (2022) 1-9. https://doi.org/10.3390/en15186618
- S.A. El-Fekey, M.N.A. El-Hakim, N.H. Rofail, Solid phase decomposition of ammonium uranate, Thermochim. Acta 54 (1982) 329-332. https://doi.org/10.1016/0040-6031(82)80023-3
- P.G. Alfredson, Pilot Plant Development of Processes for the Production of Nuclear Grade Uranium Oxide, E245, Australian Atomic Energy Commission (AAEC), 1972, pp. 10-11.
- J.L. Woolfrey, The effect of pH on the properties of ammonium uranate precipitated with gaseous ammonia, Aust. At. Energy Comm. (AAEC) E397 (1976) 4.
- S. Manna, S.B. Roy, J.B. Joshi, Study of crystallization and morphology of ammonium diuranate and uranium oxide, J. Nucl. Mater. 424 (2012) 94-100. https://doi.org/10.1016/j.jnucmat.2012.02.012
- S.H. Na, S.H. Kim, Y.W. Lee, D.S. Sohn, Effect of ball-mill treatment on powder characteristics, compaction and sintering behaviors of ex-AUC and ex-ADU UO2 powder, J. Korean Nucl. Soc. 34 (2002) 61-63.
- E.H. Kim, C.S. Choi, J.H. Park, I.S. Chang, A study on calcination and reduction of AUC, J. Korean Ceram. Soc. 30 (1993) 284-285.
- S. Manna, P. Karthik, A. Mukherjee, J. Banerjee, S.B. Roy, J.B. Joshi, Study of calcinations of ammonium diuranate at different temperatures, J. Nucl. Mater. 426 (2012) 229-232. https://doi.org/10.1016/j.jnucmat.2012.03.035
- S. Paik, S. Biswas, S. Bhattacharya, S.B. Roy, Effect of ammonium nitrate on precipitation of ammonium di-uranate (ADU) and its characteristics, J. Nucl. Mater. 440 (2013) 34-38. https://doi.org/10.1016/j.jnucmat.2013.04.011
- J. Ceder, Characterization of Uranium Oxide Powders and Sinterability, KTH Royal Institute of Technology, 2021, pp. 1-32. KTH-299501.
- M. Setyadji, F. Aliyah, Characteristics of uranium dioxide (UO2) kernel produced by sintering process using modified sintering reactor, Mater. Sci. Eng. 553 (2019), 012040.
- H.S. Yoo, S.J. Lee, H.S. Kim, J.W. Kim, Characteristic analysis of oxidized ex-DC UO2 powder according to oxidation temperature, in: Korean Nuclear Society Spring Meeting, 2001. Jeju, Korea, May 24-25.
- K.S. Kim, K.W. Song, K.W. Kang, J.H. Kim, Y.M. Kim, Properties of compacts and pellets made using bimodal sized UO2 powder, J. Korean Nucl. Soc. 31 (1999) 608-609.